subrepo: don't write .hgsubstate lines with empty subrepo state (issue4622) The '' that is used to represent the state of a not-yet-committed subrepo cannot be written to the file, because the code that parses the file splits on ' ' and expects two parts. Given that the .hgsubstate file is automatically rewritten on commit, it seems a little strange that the file is written out during a merge.

revert: restore the ability to revert across case only renames (issue4481) This regressed in 5e16fe6fdd32, in what looks like an unrelated change. It seems sufficient to pass 'ignoremissing=True', but the restored try/except has been there for six years since 41bb88cb913e, so this seems safer for now. Note that renaming directories in the filename doesn't appear to work- not sure if this would end up throwing a different type of error when that is fixed.

convert: avoid traceback in subversion sink We've had a couple reports of subversion tracebacks that trigger when the parents list is empty, and thus block showing what the commit failure was on the next two lines.

merge with i18n

i18n-pt_BR: synchronized with 5947a68fa271

template-phases: do not show description or summary if empty This is a copy of c1cb6523e968, but applied to the phases template, which is itself almost a copy of the default template. Perhaps we should rewrite these templates to use the %include syntax afforded by config files. This change seems a bit too big for stable, though.

test-command-template: add a short description of a temporary snippet This snippet was introduced by c1cb6523e968. Its purpose seems a bit obscure without historical context.

bundle2: also save output when error happens during part processing Until this changeset, we were only able to save output if an error happened during the 'transaction.close()' phase. If the 'processbundle' call raised an exception, the 'bundleoperation' object was never returned, so the reply bundle was never accessible and no output could be salvaged. We introduce a quick (but not very elegant) fix to gain access to any reply created during the processing. This conclude this output related series. We should hopefully be able client-side to see the whole server output, in a proper order. The code is now complex enough that a refactoring of it would make sense on default.

bundle2: capture output issue during transaction close We were capturing all output issue during bundle2 processing, and all output issue during transaction rollback in case of failure. However, the output issue during transaction commit was still roaming the land freely. It is now put back in line. This let the user see output from 'pretxnclose' and 'txnclose' (and related) in the right order.

bundle2: also capture hook output during processing External hook used to directly write on stdout and stderr. As a result their output was not captured by the bundle2 processing. This resulted in confusing out of order output on the client side. We are now capturing hooks output in this context.

ui: allow capture of subprocess output We want to capture hooks output during bundle2 processing. For this purpose we introduce a new 'subproc' argument to 'ui.pushbuffer'. When set, the output of sub process created through 'ui.system' will be captured in the buffer too. This will be used in the next changeset.

bundle2: capture transaction rollback message output (issue4614) The output from the transaction rollback was not included into the reply bundle. It was eventually caught by the usual 'unbundle' output capture and sent to the client but the result was out of order on the client side. We now capture the output for the transaction release and transmit it the same way as all other output. We should probably rethink the whole output capture things but this would not be appropriate for stable. The is still multiple cases were output failed to be properly capture, they will be fixed in later changesets.

bundle2: issue remote output as "status" (issue4612) Remote output should be silenced by --quiet. The issue was found while running `test-largefiles-cache.t` so it will get tested once we switch bundle2 by default.

record: edit patch of newly added files (issue4304) I tried to fix this issue in the past and had to revert the fix. This is a second attempt without the regression we found with the first one. record defines special headers (of file) as headers whose hunk are not shown to the user for editing, they are used to represent deleted, moved and new files. Since we want to authorize editing the patch of newly added file we make the newly added file with some content not special anymore. This entails that we have to save their content before applying the backup to be able to revert it if the patch does not apply properly. We reintroduce the test showing that newly added files can be edited and that their content is shown to the user.

record: remove useless line in test Remove a useless line in test to make the next patch cleaner.

revert: apply normallookup on reverted file if size isn't changed (issue4583) Before this patch, reverting a file to the revision other than the parent doesn't update dirstate. This seems to expect that timestamp and/or size will be changed by reverting. But if (1) dirstate of file "f" is filled with timestamp before reverting and (2) size and timestamp of file "f" isn't changed at reverting, file "f" is recognized as CLEAN unexpectedly. This patch applies "dirstate.normallookup()" on reverted file, if size isn't changed. Making "localrepository.wwrite()" return length of written data is needed to avoid additional (and redundant) "lstat(2)" on the reverted file. "filectx.size()" can't be used to know it, because data may be decoded at being written out. BTW, interactive reverting may cause similar problem, too. But this patch doesn't focus on fixing it, because (1) interactive (maybe slow) reverting changes one (or both) of size/timestamp of reverted files in many usecases, and (2) changes to fix it seems not suitable for stable branch.

win32: remove cacert.pem file from Inno Setup installer Duplicate the modification done in 6e38b6fc4123 for wix installer so that CA certificates loading works fine with Python 2.7.9+.

revert: accept just -I/-X without paths or -a/-i (issue4592) 'hg revert -I foo' currently fails with abort: no files or directories specified (use --all to revert all files, or 'hg update 1' to update) It doesn't seem intentional that -I/-X without other paths or --all/--interactive should fail, and it doesn't seem that harmful to allow it either, so let's just do that.

record: change wording for record curses interface We are using record and crecord in different context, not just for commiting changes but also reverting and shelving changes. This diff changes the wording from commiting to confirming changes to avoid confusing the users with what they are doing.

wix: remove cacert.pem from Windows distribution It should not be included in the Windows installers because it prevents loading CA certificates from the system store on Python 2.7.9, implemented by 760a86865f80. The msi packages bundles Python 2.7.9, so cacert.pem is no longer necessary. Backed out changeset e5c2338d76b5

tests: use double quote to quote arguments in hook for portability On windows, single quote doesn't work as quote character in hook command line, because "cmd.exe" doesn't recognize it as quoting character. And this causes failure of test. This patch uses double quote to quote arguments in hook instead of single quote for portability. Even though single quotes for "[hooks] pretxncommit" in test-clone-pull-corruption.t seems to work correctly (may MinGW sh treat specially ?) AFAIK, this patch also replaces them by double quotes for consistency.

record: fix record with change on moved file crashes (issue4619) reverting 79fceed67676, add a test to prevent the issue from coming back.

check-code: check os.path.join(*, '') not working correctly with Python 2.7.9 Since Python 2.7.9, "os.path.join(path, '')" doesn't append "os.sep" for UNC path (see issue4557 for detail).

unionrepo: use pathutil.normasprefix to ensure os.sep at the end of cwd Since Python 2.7.9, "os.path.join(path, '')" doesn't add "os.sep" at the end of UNC path (see issue4557 for detail). This makes unionrepo incorrectly work, if: 1. cwd is the root of UNC share (e.g. "\host\share"), and 2. mainreporoot is near cwd (e.g. "\host\sharefoo\repo") - host of UNC path is same as one of cwd - share of UNC path starts with one of cwd 3. "repopath" isn't specified in URI (e.g. "union:path/to/repo2") For example: $ hg --cwd \host\share -R \host\sharefoo\repo incoming union:path\to\repo2 In this case: - os.path.join(r"\host\share", "") returns r"\host\share", - r"\host\sharefoo\repo".startswith(r"\host\share") returns True, then - r"foo\repo" is treated as repopath of unionrepo instead of r"\host\sharefoo\repo" This causes failure of combining "\host\sharefoo\repo" and another repository: in addition to it, "\host\share\foo\repo" may be combined with another repository, if it accidentally exists. This patch uses "pathutil.normasprefix()" to ensure "os.sep" at the end of cwd safely, even with some problematic encodings, which use 0x5c (= "os.sep" on Windows) as the tail byte of some multi-byte characters. BTW, normalization before "pathutil.normasprefix()" isn't needed in this case, because "os.getcwd()" always returns normalized one.

bundlerepo: use pathutil.normasprefix to ensure os.sep at the end of cwd Since Python 2.7.9, "os.path.join(path, '')" doesn't add "os.sep" at the end of UNC path (see issue4557 for detail). This makes bundlerepo incorrectly work, if: 1. cwd is the root of UNC share (e.g. "\host\share"), and 2. mainreporoot is near cwd (e.g. "\host\sharefoo\repo") - host of UNC path is same as one of cwd - share of UNC path starts with one of cwd 3. "repopath" isn't specified in bundle URI (e.g. "bundle:bundlefile" or just "bundlefile") For example: $ hg --cwd \host\share -R \host\sharefoo\repo incoming bundle In this case: - os.path.join(r"\host\share", "") returns r"\host\share", - r"\host\sharefoo\repo".startswith(r"\host\share") returns True, then - r"foo\repo" is treated as repopath of bundlerepo instead of r"\host\sharefoo\repo" This causes failure of combining "\host\sharefoo\repo" and bundle file: in addition to it, "\host\share\foo\repo" may be combined with bundle file, if it accidentally exists. This patch uses "pathutil.normasprefix()" to ensure "os.sep" at the end of cwd safely, even with some problematic encodings, which use 0x5c (= "os.sep" on Windows) as the tail byte of some multi-byte characters. BTW, normalization before "pathutil.normasprefix()" isn't needed in this case, because "os.getcwd()" always returns normalized one.

dirstate: use pathutil.normasprefix to ensure os.sep at the end of root 3cc630be5f09 replaced "os.path.join(root, '')" by "root.endswith(os.sep)" examination, because Python 2.7.9 changes behavior of "os.path.join(path, '')" on UNC path. But some problematic encodings use 0x5c (= "os.sep" on Windows) as the tail byte of some multi-byte characters, and replacement above prevents Mercurial from working on the repository, of which root path ends with such multi-byte character, regardless of enabling win32mbcs. This patch uses "pathutil.normasprefix()" instead of "root.endswith(os.sep)" examination, to ensure "os.sep" at the end of "dirstate._rootdir" even with problematic encodings. "root" of dirstate can be passed to "pathutil.normasprefix()" without normalization, because it is always given from "repo.root" = "repo.wvfs.base", which is normalized by "os.path.realpath()". Using "util.endswithsep()" instead of "str.endswith(os.sep)" also fixes this problem, but this patch chooses "pathutil.normasprefix()" to centralize "adding os.sep if endswith(os.sep)" logic into it.

bookmarks: add i18n hints to bookmark sync states

histedit: fix typo in abort message

help: fix typos in txnclose and txnabort documentation

util: fix the check for non-C99 compilers (issue4605)