# convert.py Foreign SCM converter

#

# Copyright 2005-2007 Olivia Mackall <olivia@selenic.com>

#

# This software may be used and distributed according to the terms of the

# GNU General Public License version 2 or any later version.

'''import revisions from foreign VCS repositories into Mercurial'''

from mercurial.i18n import _

from mercurial import registrar

from . import (

    convcmd,

    cvsps,

    subversion,

)

cmdtable = {}

command = registrar.command(cmdtable)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for

# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should

# be specifying the version(s) of Mercurial they are tested with, or

# leave the attribute unspecified.

testedwith = b'ships-with-hg-core'

# Commands definition was moved elsewhere to ease demandload job.

@command(

    b'convert',

    [

        (

            b'',

            b'authors',

            b'',

            _(

                b'username mapping filename (DEPRECATED) (use --authormap instead)'

            ),

            _(b'FILE'),

        ),

        (b's', b'source-type', b'', _(b'source repository type'), _(b'TYPE')),

        (

            b'd',

            b'dest-type',

            b'',

            _(b'destination repository type'),

            _(b'TYPE'),

        ),

        (b'r', b'rev', [], _(b'import up to source revision REV'), _(b'REV')),

        (

            b'A',

            b'authormap',

            b'',

            _(b'remap usernames using this file'),

            _(b'FILE'),

        ),

        (

            b'',

            b'filemap',

            b'',

            _(b'remap file names using contents of file'),

            _(b'FILE'),

        ),

        (

            b'',

            b'full',

            None,

            _(b'apply filemap changes by converting all files again'),

        ),

        (

            b'',

            b'splicemap',

            b'',

            _(b'splice synthesized history into place'),

            _(b'FILE'),

        ),

        (

            b'',

            b'branchmap',

            b'',

            _(b'change branch names while converting'),

            _(b'FILE'),

        ),

        (b'', b'branchsort', None, _(b'try to sort changesets by branches')),

        (b'', b'datesort', None, _(b'try to sort changesets by date')),

        (b'', b'sourcesort', None, _(b'preserve source changesets order')),

        (b'', b'closesort', None, _(b'try to reorder closed revisions')),

    ],

    _(b'hg convert [OPTION]... SOURCE [DEST [REVMAP]]'),

    norepo=True,

)

def convert(ui, src, dest=None, revmapfile=None, **opts):

    """convert a foreign SCM repository to a Mercurial one.

    Accepted source formats [identifiers]:

    - Mercurial [hg]

    - CVS [cvs]

    - Darcs [darcs]

    - git [git]

    - Subversion [svn]

    - Monotone [mtn]

    - GNU Arch [gnuarch]

    - Bazaar [bzr]

    - Perforce [p4]

    Accepted destination formats [identifiers]:

    - Mercurial [hg]

    - Subversion [svn] (history on branches is not preserved)

    If no revision is given, all revisions will be converted.

    Otherwise, convert will only import up to the named revision

    (given in a format understood by the source).

    If no destination directory name is specified, it defaults to the

    basename of the source with ``-hg`` appended. If the destination

    repository doesn't exist, it will be created.

    By default, all sources except Mercurial will use --branchsort.

    Mercurial uses --sourcesort to preserve original revision numbers

    order. Sort modes have the following effects:

    --branchsort  convert from parent to child revision when possible,

                  which means branches are usually converted one after

                  the other. It generates more compact repositories.

    --datesort    sort revisions by date. Converted repositories have

                  good-looking changelogs but are often an order of

                  magnitude larger than the same ones generated by

                  --branchsort.

    --sourcesort  try to preserve source revisions order, only

                  supported by Mercurial sources.

    --closesort   try to move closed revisions as close as possible

                  to parent branches, only supported by Mercurial

                  sources.

    If ``REVMAP`` isn't given, it will be put in a default location

    (``<dest>/.hg/shamap`` by default). The ``REVMAP`` is a simple

    text file that maps each source commit ID to the destination ID

    for that revision, like so::

      <source ID> <destination ID>

    If the file doesn't exist, it's automatically created. It's

    updated on each commit copied, so :hg:`convert` can be interrupted

    and can be run repeatedly to copy new commits.

    The authormap is a simple text file that maps each source commit

    author to a destination commit author. It is handy for source SCMs

    that use unix logins to identify authors (e.g.: CVS). One line per

    author mapping and the line format is::

      source author = destination author

    Empty lines and lines starting with a ``#`` are ignored.

    The filemap is a file that allows filtering and remapping of files

    and directories. Each line can contain one of the following

    directives::

      include path/to/file-or-dir

      exclude path/to/file-or-dir

      rename path/to/source path/to/destination

    Comment lines start with ``#``. A specified path matches if it

    equals the full relative name of a file or one of its parent

    directories. The ``include`` or ``exclude`` directive with the

    longest matching path applies, so line order does not matter.

    The ``include`` directive causes a file, or all files under a

    directory, to be included in the destination repository. The default

    if there are no ``include`` statements is to include everything.

    If there are any ``include`` statements, nothing else is included.

    The ``exclude`` directive causes files or directories to

    be omitted. The ``rename`` directive renames a file or directory if

    it is converted. To rename from a subdirectory into the root of

    the repository, use ``.`` as the path to rename to.

    ``--full`` will make sure the converted changesets contain exactly

    the right files with the right content. It will make a full

    conversion of all files, not just the ones that have

    changed. Files that already are correct will not be changed. This

    can be used to apply filemap changes when converting

    incrementally. This is currently only supported for Mercurial and

    Subversion.

    The splicemap is a file that allows insertion of synthetic

    history, letting you specify the parents of a revision. This is

    useful if you want to e.g. give a Subversion merge two parents, or

    graft two disconnected series of history together. Each entry

    contains a key, followed by a space, followed by one or two

    comma-separated values::

      key parent1, parent2

    The key is the revision ID in the source

    revision control system whose parents should be modified (same

    format as a key in .hg/shamap). The values are the revision IDs

    (in either the source or destination revision control system) that

    should be used as the new parents for that node. For example, if

    you have merged "release-1.0" into "trunk", then you should

    specify the revision on "trunk" as the first parent and the one on

    the "release-1.0" branch as the second.

    The branchmap is a file that allows you to rename a branch when it is

    being brought in from whatever external repository. When used in

    conjunction with a splicemap, it allows for a powerful combination

    to help fix even the most badly mismanaged repositories and turn them

    into nicely structured Mercurial repositories. The branchmap contains

    lines of the form::

      original_branch_name new_branch_name

    where "original_branch_name" is the name of the branch in the

    source repository, and "new_branch_name" is the name of the branch

    is the destination repository. No whitespace is allowed in the new

    branch name. This can be used to (for instance) move code in one

    repository from "default" to a named branch.

    Mercurial Source

    ################

    The Mercurial source recognizes the following configuration

    options, which you can set on the command line with ``--config``:

    :convert.hg.ignoreerrors: ignore integrity errors when reading.

        Use it to fix Mercurial repositories with missing revlogs, by

        converting from and to Mercurial. Default is False.

    :convert.hg.saverev: store original revision ID in changeset

        (forces target IDs to change). It takes a boolean argument and

        defaults to False.

    :convert.hg.startrev: specify the initial Mercurial revision.

        The default is 0.

    :convert.hg.revs: revset specifying the source revisions to convert.

    Bazaar Source

    #############

    The following options can be used with ``--config``:

    :convert.bzr.saverev: whether to store the original Bazaar commit ID in

        the metadata of the destination commit. The default is True.

    CVS Source

    ##########

    CVS source will use a sandbox (i.e. a checked-out copy) from CVS

    to indicate the starting point of what will be converted. Direct

    access to the repository files is not needed, unless of course the

    repository is ``:local:``. The conversion uses the top level

    directory in the sandbox to find the CVS repository, and then uses

    CVS rlog commands to find files to convert. This means that unless

    a filemap is given, all files under the starting directory will be

    converted, and that any directory reorganization in the CVS

    sandbox is ignored.

    The following options can be used with ``--config``:

    :convert.cvsps.cache: Set to False to disable remote log caching,

        for testing and debugging purposes. Default is True.

    :convert.cvsps.fuzz: Specify the maximum time (in seconds) that is

        allowed between commits with identical user and log message in

        a single changeset. When very large files were checked in as

        part of a changeset then the default may not be long enough.

        The default is 60.

    :convert.cvsps.logencoding: Specify encoding name to be used for

        transcoding CVS log messages. Multiple encoding names can be

        specified as a list (see :hg:`help config.Syntax`), but only

        the first acceptable encoding in the list is used per CVS log

        entries. This transcoding is executed before cvslog hook below.

    :convert.cvsps.mergeto: Specify a regular expression to which

        commit log messages are matched. If a match occurs, then the

        conversion process will insert a dummy revision merging the

        branch on which this log message occurs to the branch

        indicated in the regex. Default is ``{{mergetobranch

        ([-\\w]+)}}``

    :convert.cvsps.mergefrom: Specify a regular expression to which

        commit log messages are matched. If a match occurs, then the

        conversion process will add the most recent revision on the

        branch indicated in the regex as the second parent of the

        changeset. Default is ``{{mergefrombranch ([-\\w]+)}}``

    :convert.localtimezone: use local time (as determined by the TZ

        environment variable) for changeset date/times. The default

        is False (use UTC).

    :hooks.cvslog: Specify a Python function to be called at the end of

        gathering the CVS log. The function is passed a list with the

        log entries, and can modify the entries in-place, or add or

        delete them.

    :hooks.cvschangesets: Specify a Python function to be called after

        the changesets are calculated from the CVS log. The

        function is passed a list with the changeset entries, and can

        modify the changesets in-place, or add or delete them.

    An additional "debugcvsps" Mercurial command allows the builtin

    changeset merging code to be run without doing a conversion. Its

    parameters and output are similar to that of cvsps 2.1. Please see

    the command help for more details.

    Subversion Source

    #################

    Subversion source detects classical trunk/branches/tags layouts.

    By default, the supplied ``svn://repo/path/`` source URL is

    converted as a single branch. If ``svn://repo/path/trunk`` exists

    it replaces the default branch. If ``svn://repo/path/branches``

    exists, its subdirectories are listed as possible branches. If

    ``svn://repo/path/tags`` exists, it is looked for tags referencing

    converted branches. Default ``trunk``, ``branches`` and ``tags``

    values can be overridden with following options. Set them to paths

    relative to the source URL, or leave them blank to disable auto

    detection.

    The following options can be set with ``--config``:

    :convert.svn.branches: specify the directory containing branches.

        The default is ``branches``.

    :convert.svn.tags: specify the directory containing tags. The

        default is ``tags``.

    :convert.svn.trunk: specify the name of the trunk branch. The

        default is ``trunk``.

    :convert.localtimezone: use local time (as determined by the TZ

        environment variable) for changeset date/times. The default

        is False (use UTC).

    Source history can be retrieved starting at a specific revision,

    instead of being integrally converted. Only single branch

    conversions are supported.

    :convert.svn.startrev: specify start Subversion revision number.

        The default is 0.

    Git Source

    ##########

    The Git importer converts commits from all reachable branches (refs

    in refs/heads) and remotes (refs in refs/remotes) to Mercurial.

    Branches are converted to bookmarks with the same name, with the

    leading 'refs/heads' stripped. Git submodules are converted to Git

    subrepos in Mercurial.

    The following options can be set with ``--config``:

    :convert.git.similarity: specify how similar files modified in a

        commit must be to be imported as renames or copies, as a

        percentage between ``0`` (disabled) and ``100`` (files must be

        identical). For example, ``90`` means that a delete/add pair will

        be imported as a rename if more than 90% of the file hasn't

        changed. The default is ``50``.

    :convert.git.findcopiesharder: while detecting copies, look at all

        files in the working copy instead of just changed ones. This

        is very expensive for large projects, and is only effective when

        ``convert.git.similarity`` is greater than 0. The default is False.

    :convert.git.renamelimit: perform rename and copy detection up to this

        many changed files in a commit. Increasing this will make rename

        and copy detection more accurate but will significantly slow down

        computation on large projects. The option is only relevant if

        ``convert.git.similarity`` is greater than 0. The default is

        ``400``.

    :convert.git.committeractions: list of actions to take when processing

        author and committer values.

        Git commits have separate author (who wrote the commit) and committer

        (who applied the commit) fields. Not all destinations support separate

        author and committer fields (including Mercurial). This config option

        controls what to do with these author and committer fields during

        conversion.

        A value of ``messagedifferent`` will append a ``committer: ...``

        line to the commit message if the Git committer is different from the

        author. The prefix of that line can be specified using the syntax

        ``messagedifferent=<prefix>``. e.g. ``messagedifferent=git-committer:``.

        When a prefix is specified, a space will always be inserted between the

        prefix and the value.

        ``messagealways`` behaves like ``messagedifferent`` except it will

        always result in a ``committer: ...`` line being appended to the commit

        message. This value is mutually exclusive with ``messagedifferent``.

        ``dropcommitter`` will remove references to the committer. Only

        references to the author will remain. Actions that add references

        to the committer will have no effect when this is set.

        ``replaceauthor`` will replace the value of the author field with

        the committer. Other actions that add references to the committer

        will still take effect when this is set.

        The default is ``messagedifferent``.

    :convert.git.extrakeys: list of extra keys from commit metadata to copy to

        the destination. Some Git repositories store extra metadata in commits.

        By default, this non-default metadata will be lost during conversion.

        Setting this config option can retain that metadata. Some built-in

        keys such as ``parent`` and ``branch`` are not allowed to be copied.

    :convert.git.remoteprefix: remote refs are converted as bookmarks with

        ``convert.git.remoteprefix`` as a prefix followed by a /. The default

        is 'remote'.

    :convert.git.saverev: whether to store the original Git commit ID in the

        metadata of the destination commit. The default is True.

    :convert.git.skipsubmodules: does not convert root level .gitmodules files

        or files with 160000 mode indicating a submodule. Default is False.

    Perforce Source

    ###############

    The Perforce (P4) importer can be given a p4 depot path or a

    client specification as source. It will convert all files in the

    source to a flat Mercurial repository, ignoring labels, branches

    and integrations. Note that when a depot path is given you then

    usually should specify a target directory, because otherwise the

    target may be named ``...-hg``.

    The following options can be set with ``--config``:

    :convert.p4.encoding: specify the encoding to use when decoding standard

        output of the Perforce command line tool. The default is default system

        encoding.

    :convert.p4.startrev: specify initial Perforce revision (a

        Perforce changelist number).

    Mercurial Destination