# sshpeer.py - ssh repository proxy class for mercurial

#

# Copyright 2005, 2006 Matt Mackall <mpm@selenic.com>

#

# This software may be used and distributed according to the terms of the

# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import re

import uuid

from .i18n import _

from . import (

    error,

    pycompat,

    util,

    wireprotoserver,

    wireprototypes,

    wireprotov1peer,

    wireprotov1server,

)

from .utils import (

    procutil,

    stringutil,

)

def _serverquote(s):

    """quote a string for the remote shell ... which we assume is sh"""

    if not s:

        return s

    if re.match('[a-zA-Z0-9@%_+=:,./-]*$', s):

        return s

    return "'%s'" % s.replace("'", "'\\''")

def _forwardoutput(ui, pipe):

    """display all data currently available on pipe as remote output.

    This is non blocking."""

    if pipe:

        s = procutil.readpipe(pipe)

        if s:

            for l in s.splitlines():

                ui.status(_("remote: "), l, '\n')

class doublepipe(object):

    """Operate a side-channel pipe in addition of a main one

    The side-channel pipe contains server output to be forwarded to the user

    input. The double pipe will behave as the "main" pipe, but will ensure the

    content of the "side" pipe is properly processed while we wait for blocking

    call on the "main" pipe.

    If large amounts of data are read from "main", the forward will cease after

    the first bytes start to appear. This simplifies the implementation

    without affecting actual output of sshpeer too much as we rarely issue

    large read for data not yet emitted by the server.

    The main pipe is expected to be a 'bufferedinputpipe' from the util module

    that handle all the os specific bits. This class lives in this module

    because it focus on behavior specific to the ssh protocol."""

    def __init__(self, ui, main, side):

        self._ui = ui

        self._main = main

        self._side = side

    def _wait(self):

        """wait until some data are available on main or side

        return a pair of boolean (ismainready, issideready)

        (This will only wait for data if the setup is supported by `util.poll`)

        """

        if (isinstance(self._main, util.bufferedinputpipe) and

            self._main.hasbuffer):

            # Main has data. Assume side is worth poking at.

            return True, True

        fds = [self._main.fileno(), self._side.fileno()]

        try:

            act = util.poll(fds)

        except NotImplementedError:

            # non supported yet case, assume all have data.

            act = fds

        return (self._main.fileno() in act, self._side.fileno() in act)

    def write(self, data):

        return self._call('write', data)

    def read(self, size):

        r = self._call('read', size)

        if size != 0 and not r:

            # We've observed a condition that indicates the

            # stdout closed unexpectedly. Check stderr one

            # more time and snag anything that's there before

            # letting anyone know the main part of the pipe

            # closed prematurely.

            _forwardoutput(self._ui, self._side)

        return r

    def unbufferedread(self, size):

        r = self._call('unbufferedread', size)

        if size != 0 and not r:

            # We've observed a condition that indicates the

            # stdout closed unexpectedly. Check stderr one

            # more time and snag anything that's there before

            # letting anyone know the main part of the pipe

            # closed prematurely.

            _forwardoutput(self._ui, self._side)

        return r

    def readline(self):

        return self._call('readline')

    def _call(self, methname, data=None):

        """call <methname> on "main", forward output of "side" while blocking

        """

        # data can be '' or 0

        if (data is not None and not data) or self._main.closed:

            _forwardoutput(self._ui, self._side)

            return ''

        while True:

            mainready, sideready = self._wait()

            if sideready:

                _forwardoutput(self._ui, self._side)

            if mainready:

                meth = getattr(self._main, methname)

                if data is None:

                    return meth()

                else:

                    return meth(data)

    def close(self):

        return self._main.close()

    def flush(self):

        return self._main.flush()

def _cleanuppipes(ui, pipei, pipeo, pipee):

    """Clean up pipes used by an SSH connection."""

    if pipeo:

        pipeo.close()

    if pipei:

        pipei.close()

    if pipee:

        # Try to read from the err descriptor until EOF.

        try:

            for l in pipee:

                ui.status(_('remote: '), l)

        except (IOError, ValueError):

            pass

        pipee.close()

def _makeconnection(ui, sshcmd, args, remotecmd, path, sshenv=None):

    """Create an SSH connection to a server.

    Returns a tuple of (process, stdin, stdout, stderr) for the

    spawned process.

    """

    cmd = '%s %s %s' % (

        sshcmd,

        args,

        procutil.shellquote('%s -R %s serve --stdio' % (

            _serverquote(remotecmd), _serverquote(path))))

    ui.debug('running %s\n' % cmd)

    cmd = procutil.quotecommand(cmd)

    # no buffer allow the use of 'select'

    # feel free to remove buffering and select usage when we ultimately

    # move to threading.

    stdin, stdout, stderr, proc = procutil.popen4(cmd, bufsize=0, env=sshenv)

    return proc, stdin, stdout, stderr

def _clientcapabilities():

    """Return list of capabilities of this client.

    Returns a list of capabilities that are supported by this client.

    """

    protoparams = {'partial-pull'}

    comps = [e.wireprotosupport().name for e in

             util.compengines.supportedwireengines(util.CLIENTROLE)]

    protoparams.add('comp=%s' % ','.join(comps))

    return protoparams

def _performhandshake(ui, stdin, stdout, stderr):

    def badresponse():

        # Flush any output on stderr.

        _forwardoutput(ui, stderr)

        msg = _('no suitable response from remote hg')

        hint = ui.config('ui', 'ssherrorhint')

        raise error.RepoError(msg, hint=hint)

    # The handshake consists of sending wire protocol commands in reverse

    # order of protocol implementation and then sniffing for a response

    # to one of them.

    #

    # Those commands (from oldest to newest) are:

    #

    # ``between``

    #   Asks for the set of revisions between a pair of revisions. Command

    #   present in all Mercurial server implementations.

    #

    # ``hello``

    #   Instructs the server to advertise its capabilities. Introduced in

    #   Mercurial 0.9.1.

    #

    # ``upgrade``

    #   Requests upgrade from default transport protocol version 1 to

    #   a newer version. Introduced in Mercurial 4.6 as an experimental

    #   feature.

    #

    # The ``between`` command is issued with a request for the null

    # range. If the remote is a Mercurial server, this request will

    # generate a specific response: ``1\n\n``. This represents the

    # wire protocol encoded value for ``\n``. We look for ``1\n\n``

    # in the output stream and know this is the response to ``between``

    # and we're at the end of our handshake reply.

    #

    # The response to the ``hello`` command will be a line with the

    # length of the value returned by that command followed by that

    # value. If the server doesn't support ``hello`` (which should be

    # rare), that line will be ``0\n``. Otherwise, the value will contain

    # RFC 822 like lines. Of these, the ``capabilities:`` line contains

    # the capabilities of the server.

    #

    # The ``upgrade`` command isn't really a command in the traditional

    # sense of version 1 of the transport because it isn't using the

    # proper mechanism for formatting insteads: instead, it just encodes

    # arguments on the line, delimited by spaces.

    #

    # The ``upgrade`` line looks like ``upgrade <token> <capabilities>``.

    # If the server doesn't support protocol upgrades, it will reply to

    # this line with ``0\n``. Otherwise, it emits an

    # ``upgraded <token> <protocol>`` line to both stdout and stderr.

    # Content immediately following this line describes additional

    # protocol and server state.

    #

    # In addition to the responses to our command requests, the server

    # may emit "banner" output on stdout. SSH servers are allowed to

    # print messages to stdout on login. Issuing commands on connection

    # allows us to flush this banner output from the server by scanning

    # for output to our well-known ``between`` command. Of course, if

    # the banner contains ``1\n\n``, this will throw off our detection.

    requestlog = ui.configbool('devel', 'debug.peer-request')

    # Generate a random token to help identify responses to version 2

    # upgrade request.

    token = pycompat.sysbytes(str(uuid.uuid4()))

    upgradecaps = [

        ('proto', wireprotoserver.SSHV2),

    ]

    upgradecaps = util.urlreq.urlencode(upgradecaps)

    try:

        pairsarg = '%s-%s' % ('0' * 40, '0' * 40)

        handshake = [

            'hello\n',

            'between\n',

            'pairs %d\n' % len(pairsarg),

            pairsarg,

        ]

        # Request upgrade to version 2 if configured.

        if ui.configbool('experimental', 'sshpeer.advertise-v2'):

            ui.debug('sending upgrade request: %s %s\n' % (token, upgradecaps))

            handshake.insert(0, 'upgrade %s %s\n' % (token, upgradecaps))

        if requestlog:

            ui.debug('devel-peer-request: hello+between\n')

            ui.debug('devel-peer-request:   pairs: %d bytes\n' % len(pairsarg))

        ui.debug('sending hello command\n')

        ui.debug('sending between command\n')

        stdin.write(''.join(handshake))

        stdin.flush()

    except IOError:

        badresponse()

    # Assume version 1 of wire protocol by default.

    protoname = wireprototypes.SSHV1

    reupgraded = re.compile(b'^upgraded %s (.*)$' % stringutil.reescape(token))

    lines = ['', 'dummy']

    max_noise = 500

    while lines[-1] and max_noise:

        try:

            l = stdout.readline()

            _forwardoutput(ui, stderr)

            # Look for reply to protocol upgrade request. It has a token

            # in it, so there should be no false positives.

            m = reupgraded.match(l)

            if m:

                protoname = m.group(1)

                ui.debug('protocol upgraded to %s\n' % protoname)

                # If an upgrade was handled, the ``hello`` and ``between``

                # requests are ignored. The next output belongs to the

                # protocol, so stop scanning lines.

                break

            # Otherwise it could be a banner, ``0\n`` response if server

            # doesn't support upgrade.

            if lines[-1] == '1\n' and l == '\n':

                break

            if l:

                ui.debug('remote: ', l)

            lines.append(l)

            max_noise -= 1

        except IOError:

            badresponse()

    else:

        badresponse()

    caps = set()

    # For version 1, we should see a ``capabilities`` line in response to the

    # ``hello`` command.

    if protoname == wireprototypes.SSHV1:

        for l in reversed(lines):

            # Look for response to ``hello`` command. Scan from the back so

            # we don't misinterpret banner output as the command reply.

            if l.startswith('capabilities:'):

                caps.update(l[:-1].split(':')[1].split())

                break

    elif protoname == wireprotoserver.SSHV2:

        # We see a line with number of bytes to follow and then a value

        # looking like ``capabilities: *``.

        line = stdout.readline()

        try:

            valuelen = int(line)

        except ValueError:

            badresponse()

        capsline = stdout.read(valuelen)

        if not capsline.startswith('capabilities: '):

            badresponse()

        ui.debug('remote: %s\n' % capsline)

        caps.update(capsline.split(':')[1].split())

        # Trailing newline.

        stdout.read(1)

    # Error if we couldn't find capabilities, this means:

    #

    # 1. Remote isn't a Mercurial server

    # 2. Remote is a <0.9.1 Mercurial server

    # 3. Remote is a future Mercurial server that dropped ``hello``

    #    and other attempted handshake mechanisms.

    if not caps:

        badresponse()

    # Flush any output on stderr before proceeding.

    _forwardoutput(ui, stderr)

    return protoname, caps

class sshv1peer(wireprotov1peer.wirepeer):

    def __init__(self, ui, url, proc, stdin, stdout, stderr, caps,

                 autoreadstderr=True):

        """Create a peer from an existing SSH connection.

        ``proc`` is a handle on the underlying SSH process.

        ``stdin``, ``stdout``, and ``stderr`` are handles on the stdio

        pipes for that process.

        ``caps`` is a set of capabilities supported by the remote.

        ``autoreadstderr`` denotes whether to automatically read from

        stderr and to forward its output.

        """

        self._url = url

        self.ui = ui

        # self._subprocess is unused. Keeping a handle on the process

        # holds a reference and prevents it from being garbage collected.

        self._subprocess = proc

        # And we hook up our "doublepipe" wrapper to allow querying

        # stderr any time we perform I/O.

        if autoreadstderr:

            stdout = doublepipe(ui, util.bufferedinputpipe(stdout), stderr)

            stdin = doublepipe(ui, stdin, stderr)

        self._pipeo = stdin

        self._pipei = stdout

        self._pipee = stderr

        self._caps = caps

        self._autoreadstderr = autoreadstderr

    # Commands that have a "framed" response where the first line of the

    # response contains the length of that response.

    _FRAMED_COMMANDS = {

        'batch',

    }