MCABBER(1)

===========

Mikael BERTHE <mcabber@lilotux.net>

v0.7.2-dev, November 2005

NAME

----

mcabber - a simple Jabber console client

SYNOPSIS

--------

'mcabber' [ -f configfile ] [ --help | -h ]

DESCRIPTION

-----------

`mcabber(1)` is a small Jabber console client. +

For now it needs a configuration file to start, so please copy the sample

mcabberrc file and adapt your connection settings.

You also need to have an existing Jabber account to use this software, as

it cannot (un)register accounts yet.

The `mcabber(1)` screen is divided into 4 regions.

The 'roster', alias 'buddylist', is on the left.  The 'chat window', or chat

buffer, is on the right.  The 'input line' lies at the bottom of the screen,

under a small 'log window'.

To display buddies chat buffers, you will have to enter 'chat mode'.

You can enter chat mode by pressing enter, and leave chat mode with the ESC

key.  Simply sending a message will also enable chat mode.

Here are some of the features of `mcabber`:

- 'SSL support'.

- 'MUC support' (Multi-User Chat).

- 'History logging:'  If enabled (see the CONFIGURATION FILE section),

  `mcabber` can save discussions to history log files.

- 'Commands completion:'  If possible, `mcabber` will try to complete your

  command line if you hit the Tab key.

- 'External actions:'  Some events (like receiving a message) can trigger an

  external action, for example a shell script (you need to enable it in your

  configuration file).  A sample events script ("eventcmd") is provided with

  `mcabber` source code, in the contrib directory.

OPTIONS

-------

--help, -h::

        Quick help usage message

-f configfile::

        Use configuration file 'configfile'

KEYS

----

Text typing occurs in the 'input line'; basic operations are supported

(left arrow, right arrow, home/end keys, insert, delete, backspace...).

PageUp and PageDown keys are used to move in the roster.

To send a message, move to the choosen buddy in the buddylist, type your

message and hit enter.  If the line begins with a slash, this will be

interpreted as a command (see the COMMAND section below).  Hit escape to

leave the chat mode.

Here is a quick description of the key bindings:

Ctrl-a::        Go to the beginning of the input line

Ctrl-e::        Go to the end of the input line

PgUp/PgDown::   Move inside the roster (buddylist)

Tab::           Complete current word, in the input line

Ctrl-g::        Cancel completion / ctrl-g

Ctrl-p/Ctrl-n:: Scroll up/down half a screen in the buffer window (chat mode)

Ctrl-u::        Delete from beginning of the line to the cursor

Ctrl-k::        Delete from the cursor to the end of line

Ctrl-w::        Backward kill word

Ctrl-t::        Transpose chars

Ctrl-o::        Accept line and put the next history line in the input line (accept-line-and-down-history)

Ctrl-q::        Jump to the next unread message

COMMANDS

--------

/add jid [nickname]::

        Add the "jid" Jabber user to our roster (default group), and send a

        notification request to this buddy.  If no nickname is specified, the

        jid is used.

/alias name = command line::

        Add "name" as an alias for "command line". +

        Aliases are expanded only once, thus they can not be chained. +

        "/alias name" displays the value associated with the "name" alias;

        "/alias name =" unsets the "name" alias. +

        Example: "/alias away = status away".

/bind keycode = command line::

        Bind a command line to the key with the "keycode" code number. +

        Keycodes of unused keys are displayed by `mcabber` in the log window

        when pressing the key, for example "Unknown key=265". +

        "/bind keycode" displays the command line bound to the given keycode;

        "/bind keycode" unbinds the given keycode. +

        Note: aliases can be used in key bindings. +

        Example: "/bind 265 = status online" (265 is F1 for me, but it may

        depend on your ncurses installation).

        The 'buffer' command manipulates the current buddy's buffer

        (chat window).

        'clear';;                clear the current buddy chat window

        'bottom';;               jump to the bottom of the current buddy chat buffer

        'top';;                  jump to the top of the current buddy chat buffer

        'up' [n];;               scroll the buffer up n lines (default: half a screen)

        'down' [n];;             scroll the buffer down n lines (default: half a screen)

        'search_backward' text;; search for "text" in the current buddy chat buffer

        'search_forward'  text;; search for "text" in the current buddy chat buffer

/clear::

        The 'clear' command is actually an alias for "/buffer clear".

/connect::

        Establish connection to the Jabber server.

/del::

        Delete the current buddy from our roster, unsubscribe from its presence

        notification and unsubscribe it from ours.

/disconnect::

        Terminate connection to the Jabber server.  Note: the roster is only

        available when the connection to the server is active, so the

        buddylist is empty when disconnected.

/group fold|unfold|toggle::

        The 'group' command changes the current group display.

        'fold';; fold (shrink) the current group tree in the roster

        'unfold';; unfold (expand) the current group tree in the roster

        'toggle';; toggle the state (fold/unfold) of the current tree

/info::

        Display info on the selected entry (user, agent, group...). +

        For users, resources are displayed with the status, priority and

        status message (if available) of each resource.

/move [groupname]::

        Move the current buddy to the requested group.  If no group is

        specified, then the buddy is moved to the default group.

        This command only works with users (not agents), at the moment. +

        Tip: if the chatmode is enabled, you can use "/roster alternate"

        to jump to the moved buddy.

/msay begin|verbatim|send|abort::

        Send a multi-line message.  To write a single message with several

        lines, the 'multi-line mode' should be used. +

        In multi-line mode, each line (except command lines) typed in the input

        line will be added to the multi-line message.  Once the message is

        finished, it can be sent to the current selected buddy with the "/msay

        send" command. +

        The 'verbatim' multi-line mode disables commands, so that it is

        possible to enter lines starting with a slash.  Only the "/msay"

        command (with send or abort parameters) can be used to exit verbatim

        mode.

        'begin';; enter multi-line mode

        'verbatim';; enter verbatim multi-line mode

        'send';; send the current multi-line message to the currently selected buddy

        'abort';; leave multi-line mode without sending the message

/quit::

        Disconnect and leave `mcabber(1)`.

/rawxml send::

        'send' string: send string (raw XML format) to the Jabber server.  No check is done on the string provided.  BEWARE! Use this only if you know what you are doing, or you could terminate the connection.

/rename nickname::

        Rename current buddy to the given nickname.

        This command does not work for groups, at the moment (but you can move

        the buddies to another group with the "/move" command).

/room join|leave|names|nick|privmsg|remove|topic|unlock|destroy::

/room invite|kick|ban|role|affil::

        The 'room' command handles Multi-User Chat room actions.

        'join' room nick;;      join "room", using "nick" as nickname

        'leave' [message];;     leave the current room

        'names';;               display members of the current room

        'nick' nick;;           change your nickname in the current room

        'privmsg' nick msg;;    send private message "msg" to "nick"

        'remove';;              remove the current room from the roster (you must have left this room before)

        'topic';;               set topic for current room

        'unlock';;              unlock current room (if you are the owner)

        'destroy' [reason];;    destroy the current room (use with care!)

        'whois' nick;;          display MUC information about "nick"

        'ban' jid [reason];;    ban jid from the current room

        'invite' jid [reason];; invite jid to the current room

        'kick' nick [reason];;  kick "nick" from the current room

        'role' jid role [reason];;  change jid's role (role can be "none", "visitor", "participant", "moderator")

        'affil' jid affil [reason];; change jid's affiliation (affil can be "none", "member", "admin", "owner")

/roster bottom|top|hide_offline|show_offline|toggle_offline::

/roster alternate|unread_first|unread_next::

/roster search bud::

        The 'roster' command manipulates the roster/buddylist.  Here are the available parameters:

        'bottom';;       jump to the bottom of the roster

        'top';;          jump to the top of the roster

        'up';;           move up in the roster

        'down';;         move down in the roster

        'hide_offline';; hide offline buddies

        'show_offline';; show offline buddies

        'toggle_offline';; toggle display of offline buddies

        'search' bud;;   search for a buddy with a name or buddy containing "bud" (only in the displayed buddylist)

        'alternate';;    jump to alternate buddy.  The "alternate" buddy is the last buddy left while being in chat mode (this command is thus especially useful after commands like "/roster unread_first")

        'unread_first';; jump to the first unread message

        'unread_next';;  jump to the next unread message

/say text::

        Send the "text" message to the currently selected buddy.  Can be useful

        if you want to send a message beginning with a slash, for example.

/say_to jid text::

        Send the "text" message to the specified jid.

        Please note that this command doesn't set the default resource for

        a contact, so if you want to send several messages to a specific

        ressource you will have to use "/say_to" for each message.

/status [online|avail|invisible|free|dnd|notavail|away [-|StatusMessage]]::

        Show or set the current status. +

        If no status is specified, display the current status. +

        If a status message is specified, it will overrride the message*

        variables (these variables can be set in the configuration file).

        If no relevant message* variable is set and no status message provided,

        the current status message is kept.  If StatusMessage is "-", the

        current status message is cleared.

/status_to jid online|avail|invisible|free|dnd|notavail|away [StatusMessage]::

        Send the requested status to the specified Jabber user. +

        Note: this status will be overridden by subsequent "/status" commands.

        If you are using the auto-away feature, the status will overridden

        too. +

        Note: The jid can include a resource (i.e. user@server/resource).

CONFIGURATION FILE

------------------

See the provided sample configuration file, which should be self-documented.

FILES

-----

The following files can be used by `mcabber(1)`:

    $HOME/.mcabber/mcabberrc    Default configuration file

    $HOME/.mcabberrc            Configuration file used if no other has been found

    $HOME/.mcabber/histo/       Default directory for storing chat history files, if enabled

BUGS

----

Certainly.  Please tell me if you find one!  :-)

AUTHOR

------

Written by mailto:mcabber@lilotux.net[Mikael BERTHE]. +

Originally based on http://cabber.sourceforge.net[Cabber], please

consult the AUTHORS file for details.

RESOURCES

---------

http://www.lilotux.net/~mikael/mcabber/[Main web site]

COPYING

-------

Copyright (C) 2005 Mikael Berthe. +

Some portions are Copyright (C) 2002-2004 mailto:cabber@ajmacias.com[].

Free use of this software is granted under the terms of the GNU General Public

License (GPL).