-- Prosody Example Configuration File

--

-- Information on configuring Prosody can be found on our

-- website at https://prosody.im/doc/configure

--

-- Tip: You can check that the syntax of this file is correct

-- when you have finished by running this command:

--     prosodyctl check config

-- If there are any errors, it will let you know what and where

-- they are, otherwise it will keep quiet.

--

-- The only thing left to do is rename this file to remove the .dist ending, and fill in the

-- blanks. Good luck, and happy Jabbering!

---------- Server-wide settings ----------

-- Settings in this section apply to the whole server and are the default settings

-- for any virtual hosts

-- This is a (by default, empty) list of accounts that are admins

-- for the server. Note that you must create the accounts separately

-- (see https://prosody.im/doc/creating_accounts for info)

-- Example: admins = { "user1@example.com", "user2@example.net" }

admins = { }

-- Enable use of libevent for better performance under high load

-- For more information see: https://prosody.im/doc/libevent

--use_libevent = true

-- Prosody will always look in its source directory for modules, but

-- this option allows you to specify additional locations where Prosody

-- will look for modules first. For community modules, see https://modules.prosody.im/

--plugin_paths = {}

-- This is the list of modules Prosody will load on startup.

-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.

-- Documentation for bundled modules can be found at: https://prosody.im/doc/modules

modules_enabled = {

	-- Generally required

		"roster"; -- Allow users to have a roster. Recommended ;)

		"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.

		"tls"; -- Add support for secure TLS on c2s/s2s connections

		"dialback"; -- s2s dialback support

		"disco"; -- Service discovery

	-- Not essential, but recommended

		"carbons"; -- Keep multiple clients in sync

		"pep"; -- Enables users to publish their avatar, mood, activity, playing music and more

		"private"; -- Private XML storage (for room bookmarks, etc.)

		"blocklist"; -- Allow users to block communications with other users

		"vcard4"; -- User profiles (stored in PEP)

		"vcard_legacy"; -- Conversion between legacy vCard and PEP Avatar, vcard

		"limits"; -- Enable bandwidth limiting for XMPP connections

	-- Nice to have

		"version"; -- Replies to server version requests

		"uptime"; -- Report how long server has been running

		"time"; -- Let others know the time here on this server

		"ping"; -- Replies to XMPP pings with pongs

		"register"; -- Allow users to register on this server using a client and change passwords

		--"mam"; -- Store messages in an archive and allow users to access it

		--"csi_simple"; -- Simple Mobile optimizations

	-- Admin interfaces

		"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands

		--"admin_telnet"; -- Opens telnet console interface on localhost port 5582

	-- HTTP modules

		--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"

		--"websocket"; -- XMPP over WebSockets

		--"http_files"; -- Serve static files from a directory over HTTP

	-- Other specific functionality

		--"groups"; -- Shared roster support

		--"server_contact_info"; -- Publish contact information for this service

		--"announce"; -- Send announcement to all online users

		--"welcome"; -- Welcome users who register accounts

		--"watchregistrations"; -- Alert admins of registrations

		--"motd"; -- Send a message to users when they log in

		--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.

		--"proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use

}

-- These modules are auto-loaded, but should you want

-- to disable them then uncomment them here:

modules_disabled = {

	-- "offline"; -- Store offline messages

	-- "c2s"; -- Handle client connections

	-- "s2s"; -- Handle server-to-server connections

	-- "posix"; -- POSIX functionality, sends server to background, enables syslog, etc.

}

-- Disable account creation by default, for security

-- For more information see https://prosody.im/doc/creating_accounts

allow_registration = false

-- Force clients to use encrypted connections? This option will

-- prevent clients from authenticating unless they are using encryption.

c2s_require_encryption = true

-- Force servers to use encrypted connections? This option will

-- prevent servers from authenticating unless they are using encryption.

s2s_require_encryption = true

-- Force certificate authentication for server-to-server connections?

s2s_secure_auth = false

-- Some servers have invalid or self-signed certificates. You can list

-- remote domains here that will not be required to authenticate using

-- certificates. They will be authenticated using DNS instead, even

-- when s2s_secure_auth is enabled.

--s2s_insecure_domains = { "insecure.example" }

-- Even if you disable s2s_secure_auth, you can still require valid

-- certificates for some domains by specifying a list here.

--s2s_secure_domains = { "jabber.org" }

-- Enable rate limits for incoming client and server connections

limits = {

  c2s = {

    rate = "10kb/s";

  };

  s2sin = {

    rate = "30kb/s";

  };

}

-- Select the authentication backend to use. The 'internal' providers

-- use Prosody's configured data storage to store the authentication data.

authentication = "internal_hashed"

-- Select the storage backend to use. By default Prosody uses flat files

-- in its configured data directory, but it also supports more backends

-- through modules. An "sql" backend is included by default, but requires

-- additional dependencies. See https://prosody.im/doc/storage for more info.

--storage = "sql" -- Default is "internal"

-- For the "sql" backend, you can uncomment *one* of the below to configure:

--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.

--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }

--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }

-- Archiving configuration

-- If mod_mam is enabled, Prosody will store a copy of every message. This

-- is used to synchronize conversations between multiple clients, even if

-- they are offline. This setting controls how long Prosody will keep

-- messages in the archive before removing them.

archive_expires_after = "1w" -- Remove archived messages after 1 week

-- You can also configure messages to be stored in-memory only. For more

-- archiving options, see https://prosody.im/doc/modules/mod_mam

-- Logging configuration

-- For advanced logging see https://prosody.im/doc/logging

log = {

	info = "prosody.log"; -- Change 'info' to 'debug' for verbose logging

	error = "prosody.err";

	-- "*syslog"; -- Uncomment this for logging to syslog

	-- "*console"; -- Log to the console, useful for debugging with daemonize=false

}

-- Uncomment to enable statistics

-- For more info see https://prosody.im/doc/statistics

-- statistics = "internal"

-- Certificates

-- Every virtual host and component needs a certificate so that clients and

-- servers can securely verify its identity. Prosody will automatically load

-- certificates/keys from the directory specified here.

-- For more information, including how to use 'prosodyctl' to auto-import certificates

-- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates

-- Location of directory to find certificates in (relative to main config file):

certificates = "certs"

-- HTTPS currently only supports a single certificate, specify it here:

--https_certificate = "certs/localhost.crt"

----------- Virtual hosts -----------

-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.

-- Settings under each VirtualHost entry apply *only* to that host.

VirtualHost "localhost"

--VirtualHost "example.com"

--	certificate = "/path/to/example.crt"

------ Components ------

-- You can specify components to add hosts that provide special services,

-- like multi-user conferences, and transports.

-- For more information on components, see https://prosody.im/doc/components

---Set up a MUC (multi-user chat) room server on conference.example.com:

--Component "conference.example.com" "muc"

--- Store MUC messages in an archive and allow users to access it

--modules_enabled = { "muc_mam" }

---Set up an external component (default component port is 5347)

--

-- External components allow adding various services, such as gateways/

-- transports to other networks like ICQ, MSN and Yahoo. For more info

-- see: https://prosody.im/doc/components#adding_an_external_component

--

--Component "gateway.example.com"

--	component_secret = "password"