largefiles: use 'default' instead of 'default-push' when pulling (issue3584)
This only applies to downloading largefiles, and only when no source for the
pull is explicitly provided. The repository itself was properly being pulled
via 'default' previously.
Using --all-largefiles is not necessary on a bare pull to test this (this
existing test is merely a convenience), but it is required to test pulling on
the rebase path.
Note that the errors generated in the --rebase case are because the repo
specified doesn't have the largefiles in its cache (though they are in the user
cache), so the errors are misleading. Specifying --all-largefiles when cloning
to 'b' fixes this, but instead of errors, it reports caching only 5 largefiles
instead of the 9 that come up missing. Likely this is because the largefile
download procedure tries to download missing files for each rev, and some of the
files have standins in more than one rev that gets pulled.
Test interactions between mq and patch.eol
$ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ echo "[diff]" >> $HGRCPATH
$ echo "nodates=1" >> $HGRCPATH
$ cat > makepatch.py <<EOF
> f = file('eol.diff', 'wb')
> w = f.write
> w('test message\n')
> w('diff --git a/a b/a\n')
> w('--- a/a\n')
> w('+++ b/a\n')
> w('@@ -1,5 +1,5 @@\n')
> w(' a\n')
> w('-b\r\n')
> w('+y\r\n')
> w(' c\r\n')
> w(' d\n')
> w('-e\n')
> w('\ No newline at end of file\n')
> w('+z\r\n')
> w('\ No newline at end of file\r\n')
> EOF
$ cat > cateol.py <<EOF
> import sys
> for line in file(sys.argv[1], 'rb'):
> line = line.replace('\r', '<CR>')
> line = line.replace('\n', '<LF>')
> print line
> EOF
$ hg init repo
$ cd repo
$ echo '\.diff' > .hgignore
$ echo '\.rej' >> .hgignore
Test different --eol values
$ python -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
$ hg ci -Am adda
adding .hgignore
adding a
$ python ../makepatch.py
$ hg qimport eol.diff
adding eol.diff to series file
should fail in strict mode
$ hg qpush
applying eol.diff
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
invalid eol
$ hg --config patch.eol='LFCR' qpush
applying eol.diff
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
force LF
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ hg qrefresh
$ python ../cateol.py .hg/patches/eol.diff
test message<LF>
<LF>
diff -r 0d0bf99a8b7a a<LF>
--- a/a<LF>
+++ b/a<LF>
@@ -1,5 +1,5 @@<LF>
-a<LF>
-b<LF>
-c<LF>
-d<LF>
-e<LF>
\ No newline at end of file<LF>
+a<CR><LF>
+y<CR><LF>
+c<CR><LF>
+d<CR><LF>
+z<LF>
\ No newline at end of file<LF>
$ python ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again forcing LF and compare revisions
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ python ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again without LF and compare revisions
$ hg qpush
applying eol.diff
now at: eol.diff
$ python ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
$ cd ..
Test .rej file EOL are left unchanged
$ hg init testeol
$ cd testeol
$ python -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
$ hg ci -Am adda
adding a
$ python -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
$ hg qnew patch1
$ hg qpop
popping patch1
patch queue now empty
$ python -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
$ hg ci -m changea
$ hg --config 'patch.eol=LF' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ hg --config 'patch.eol=auto' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ cd ..