test-mq-qrefresh: adapt for Windows after 39b7052b217b Fixes @@ -208,7 +208,7 @@ $ echo 'orphan' > orphanchild $ hg add orphanchild $ hg qrefresh nonexistentfilename # clear patch - nonexistentfilename: No such file or directory + nonexistentfilename: The system cannot find the file specified $ hg qrefresh --short 1/base $ hg qrefresh --short 2/base on Windows

merge with stable

Added signature for changeset 195ad823b5d5

Added tag 2.4 for changeset 195ad823b5d5

tests: fix test for issue3581 for vfat on Linux

filemerge: only run test for issue3581 on non-windows environments

openpath: specify binary mode and use util.posixfile follow-up to 0e2846b2482c

i18n-pt_BR: synchronized with afa7e6fa820b

merge with i18n

i18n-pt_BR: synchronized with 36ed69d4593d

i18n-ja: synchronized with 0188ddfa844e

subrepo: only do clean update when overwrite is set (issue3276) Files in a subrepo were overwritten on update. But this should only happen on a clean update (example: -C is specified). Use the overwrite parameter introduced for svn subrepos in c19b9282d3a7 to decide whether to merge changes (as update) or remove them (as clean). The new function hg.updaterepo is intruduced to keep all update calls in hg. test-subrepo.t is extended to test if an untracked file is overwritten (issue3276). (Update -C is already tested in many places.) The first two chunks are debugging output which has changed. (Because overwrite is not always true anymore for subrepos) All other tests still pass without any change.

i18n: change output of largefiles for summary to distinguish from one for outgoing Before this patch, largefiles extension uses "largefiles: No remote repo" message not only for "outgoing" as status report, but also for "summary" as summarized information. This sharing prevents message translators from inserting white spaces between "largefiles:" and "No remote repo" in translated message to align column position of summarized information. This patch changes output of largefiles for summary to distinguish from one for outgoing. This patch puts "no remote repo" into parentheses, because this is not summarized information.

i18n: make column positioning message of MQ summary output translatable Before this patch, one of column positioning messages of MQ summary output is not translatable, and patches are always listed up at fixed column position like below, when patch queue is not empty: mq: 1 applied, 1 unapplied But column positioning messages for other summarized information are translatable, so other information may be displayed at different column position on non-English locale environments. This patch makes column positioning message of MQ summary output translatable.

i18n: add "i18n" comment to column positioning messages of "hg summary" This comment makes it easier to distinguish such messages from others for message translators.

i18n: add "i18n" comment to column positioning messages of "hg log" This comment makes it easier to distinguish such messages from others for message translators.

i18n: add "i18n" comment to error messages of template functions

icasefs: make case-folding collision detection as deletion aware (issue3648) Before this patch, case-folding collision is checked simply between manifests of each merged revisions. So, files may be considered as colliding each other, even though one of them is already deleted on one of merged branches: in such case, merge causes deleting it, so case-folding collision doesn't occur. This patch checks whether both of files colliding each other still remain after merge or not, and ignores collision if at least one of them is deleted by merge. In the case that one of colliding files is deleted on one of merged branches and changed on another, file is considered to still remain after merge, even though it may be deleted by merge, if "deleting" of it is chosen in "manifestmerge()". This avoids fail to merge by case-folding collisions after choices from "changing" and "deleting" of files. This patch adds only tests for "removed remotely" code paths in "_remains()", because other ones are tested by existing tests in "test-casecollision-merge.t".

mq: fix qrefresh case sensitivity (issue3271) When calling qrefresh with filenames, the filenames were being treated as case-sensistive on case-insensitive file systems. So 'qrefresh foo' would not match file 'Foo', and it failed silently. This fix makes it work correctly on case-insensitive file systems. Previously the matching function was applied directly to the filenames. Now we apply the matching function through repo.status, which handles the case logic for us. A side effect of using repo.status is that if the qrefresh file doesn't exist, there is output stating it doesn't exist. Adds a test to an existing mq refresh case test.

url: use open and not url.open for local files (issue3624)

revset: accept @ in unquoted symbols (issue3686)

filemerge: use util.shellquote when calling merge (issue3581)

merge with i18n

i18n-pt_BR: synchronized with 71c1513fd560

clone: show status "updating to bookmark @" if bookmark @ is not on the default branch, we show updating to bookmark @ on branch <name>

test-clone: fix directory level 92980a8dfdfe inserted a "cd a" but didn't restore the previous directory.

patchbomb: -c is not an alias for the --confirm option The help text shows "-c/--confirm", which implies that -c is an alias for --confirm. Actually, it is an alias for --cc. Correct the text by removing -c.

dirstate: handle dangling junctions on windows (issue2579)

largefiles: don't copy largefiles from working dir to the store while converting Previously, if one or more largefiles for a repo being converted were not in the usercache, the convert would abort with a reference to the largefile being missing (as opposed to the previous patch, where the standin was referenced as missing). This is because commitctx() tries to copy all largefiles to the local store, first from the user cache, and if the file isn't found there, from the working directory. No files will exist in the working directory during a convert, however. It is not sufficient to force the source repo to be local before proceeding, because clone and pull do not download largefiles by default. This is slightly less than ideal because while the conversion will now complete, it won't be possible to update to revs with missing largefiles unless the user intervenes manually, because there is no default path pointing back to the source repo. Ideally these files would be cached during the conversion. This check could have been done in reposetup.commitctx() instead, but this ensures the local store directory is created, which is necessary to enable the standin matcher. The rm -> 'rm -f' change in the test is to temporarily suppress an error clearing the cache- as noted, the cache is is not repopulated during convert. When that is fixed, this can be changed back and the verification errors will disappear too.

largefiles: respect the rev when reading standins in copytostore() (issue3630) When the rev isn't specified, the standin for the working copy gets read. But convert doesn't update the working copy for each cset it processes, so there is no standin and the 'hg convert' would abort complaining about the standin being missing. Note that if the largefile is not in the user cache, 'hg convert' complains about the largefile itself missing from the destination repo.

subrepo: subrepo isolation, pass baseui when cloning a new subrepo (issue2904) Create the repo with baseui because it should only get the global configuration. After this patch issue2904 is finally fixed.

subrepo: more isolation, only use ui for hg.peer when there is no repo ui contains repo specific configuration, so do not use it when there is a repo. But pass it to hg.peer when there is no repo. Then it only contains global configuration.

peer: subrepo isolation, pass repo instead of repo.ui to hg.peer Do not pass ui because it contains the configuration of the repo. It is the same object as repo.ui. When a repo is passed to hg.peer, the global configuration is read from repo.baseui.

subrepo: isolate configuration between each repositories in subrepo tree Before this patch, repository local configurations are not isolated between repositories in subrepo tree, because "localrepository" objects for each subrepositories are created with "ui" instance of the parent of each ones. So, local configuration of the parent or higher repositories are visible also in children or lower ones. This patch uses "baseui" instead of "ui" to create repository object: the former contains only global configuration. This patch also copies 'ui.commitsubrepos' configuration to commit recursively in subrepo tree, because it may be set in not "repo.baseui" but "repo.ui".

bookmarks: backed out new message from changeset 52c7e171e355 Not strictly a bugfix, hasn't achieved consensus yet.

clone: print bookmark name when clone activates a bookmark Similar to the message that prints the checked out branch name. Without this, the user might accidentally move the @ bookmark.

clone: activate @ bookmark if updating to it The message "updating bookmark @ failed!" in test-bookmarks-pushpull.t is correct, because the changeset that the @ bookmark points to is not pushed to the target repository.

test-clone.t: check that branch "@" is not automatically checked out This verifies that c9339efed653 fixes the second problem mentioned in issue3677.

test-bookmarks.t: check that bookmark "default" is not automatically checked out This verifies that c9339efed653 fixes the problem originally reported in issue3677.

clone: make sure to use "@" as bookmark and "default" as branch (issue3677) Before this change a bookmark named "default" or a branch named "@" would cause the wrong changeset to be checked out. The change in output of test-hardlinks.t is due to the fact that no unneeded tag lookups for the tags "@" or "default" happen, therefore the cache file is not created.

bookmark: simplify nodemap check introduced in the previous changeset

bookmark: prevent crashing when a successor is unknown locally (issue3680) The `%ln` revset substitution does not accept unknown node. We prune unknown node from potential successors before computing descendants. This have no impact on the result of this function. - Descendants of unknown changeset as unknown, - all successors of unknown changesets are already return by the call who returned those same unknown changesets, - unknown changesets are never a valid destination for a bookmark.

bookmark: complexity pull-push test to have deeper tree This changeset only touch test. The previous test was correct, it tested that the successors of an old bookmark position was seen as a valid destination for bookmark. However, a newer version is made for two reason: (1) The new test check further. It check that the descendant of the successors is a valid destination (2) An ever more complexe test is needed to validate a future fix to issue 3680 Splitting complexification of the test and actual bugfix help to reduce the noise in the bugfix changeset. Issue 3680 is NOT fixed by this changeset.

amend: fix incompatibity between logfile and message option (issue3675) Bug introduced by 9732473aa24b

test-remove: adapt to differing error message on Windows On Windows, this part of the test failed with $ hg rm --after nosuch - nosuch: No such file or directory + nosuch: The system cannot find the file specified [1] Fixed by glob-ing away the error message if the test is run on Windows (see for example test-bad-pull.t line 3 for precedent). test-remove.t now passes on Windows.

test-remove: fix \ vs. / issues on Windows This part of the test failed with $ hg rm --after d1 - removing d1/a + removing d1\a on Windows.

verify: fix all doubled-slash sites (issue3665)

patchbomb: respect --in-reply-to for all mails if no intro message is sent Before this change, the thread hierarchy looked like this: PARENT PATCH1/x PATCH2/x PATCH3/x ... Now it is: PARENT PATCH1/x PATCH2/x PATCH3/x ... With an introductory message the behaviour is unchanged: PARENT INTRO PATCH1/x PATCH2/x PATCH3/x ...

test: add test for the issue introduced by e410be860393 (issue3669) e410be860393 (released as Mercurial 2.3) introduced the issue that the revset program started with 40 hexadecimal letters caused unexpected result at "hg log" execution. This issue was already fixed by bde1185f406c (released as 2.3.1), but there is no test to examine whether this issue is certainly fixed or not: no test fails even if bde1185f406c is backed out. This patch adds test for this issue. Added test is also confirmed to fail, when it is tested against: - Mercurial 2.3, or - Mercurial 2.3.1 or later with backing bde1185f406c out

obsolete: add missing line feed in debug error message

merge with stable

localrepo: translate "push includes X changeset" only once This was introduced in 12fdaa30063a

merge stable heads

Merge with stable

Merge repeated-slash fix

verify: tolerate repeated slashes in a converted repo (issue3665) These slashes are a hangover from issue3612, fixed in e4da793998bf. Although the bugfix in that commit is correct, the test it adds does not replicate the conditions for the bug correctly.

scmutil: generalize message to make it more i18n-friendly

update: check for missing files with --check (issue3595)

remove: don't return error on directories with tracked files Spotted by Sergey <sergemp@mail.ru>

largefiles: use 'default' instead of 'default-push' when pulling (issue3584) This only applies to downloading largefiles, and only when no source for the pull is explicitly provided. The repository itself was properly being pulled via 'default' previously. Using --all-largefiles is not necessary on a bare pull to test this (this existing test is merely a convenience), but it is required to test pulling on the rebase path. Note that the errors generated in the --rebase case are because the repo specified doesn't have the largefiles in its cache (though they are in the user cache), so the errors are misleading. Specifying --all-largefiles when cloning to 'b' fixes this, but instead of errors, it reports caching only 5 largefiles instead of the 9 that come up missing. Likely this is because the largefile download procedure tries to download missing files for each rev, and some of the files have standins in more than one rev that gets pulled.