test: add some assert in the bookrace extension This cannot hurt to have a bit more security in the test extension.

test: factor out the "wait" logic in bookrace The test is currently not testing the race it is supposed to test. The synchronisation is still valid, but needs to run at a different point. We start with extracting the synchronisation logic for clarity.

test: remove dead code in the bookrace extension This code is the remain of a previous version of the code. It is never ran, so we can remove it.

run-tests: stop matching line for missing feature Before this change, the following unified test input would silently pass $ echo foo foo (false !) After this change, the "foo" output is properly detected as unexpected. The output of an handful of test had to be updated from broken conditional (that ended up working by chance).

log: pass getcopies() function instead of getrenamed() to displayer (API) This reduces the duplication between the two displayer functions (and between them and scmutil.getcopiesfn()). It's still more code than two patches ago, but there's less duplication. Differential Revision: https://phab.mercurial-scm.org/D6546

copies: create helper for getting all copies for changeset There are a few places where we get all the copies for a changeset (at least the {file_copies} template and in two places in `hg log --copies` code). These places currently call scmutil.getrenamedfn() to get a caching "getrenamed" function. They all use it in a similar way. We will be able to reuse more code by having a function for getting all the copies for a changeset. This patch introduces such a function. It uses it in the {file_copies} template to show that it works. It relies on the existing scmutil.getrenamedfn() for caching in the filelog-centric case. Differential Revision: https://phab.mercurial-scm.org/D6545

logcmdutil: also check for copies in null revision and working copy It's safe (and fast) to look for copies in the null revision, and it's incorrect not to look for them in the working copy, so let's look in both places. Differential Revision: https://phab.mercurial-scm.org/D6544

tests: demonstrate missing copy information in working copy with graphlog Differential Revision: https://phab.mercurial-scm.org/D6543

remotefilelog: handle copies in changesets in getrenamedfn() override E.g. the {file_copies} template keyword didn't work with copies in changesets before this patch because remotefilelog overrides the getrenamedfn() and didn't handle the changeset-centric case. Differential Revision: https://phab.mercurial-scm.org/D6542

remotefilelog: check if RFL is enabled in getrenamedfn() override In 8a0e03f7baf4 (remotefilelog: move most setup from onetimesetup() to uisetup(), 2019-05-01), I said: All the wrappers moved in this patch check if remotefilelog is enabled before they change behavior, so it's safe to always wrap. That was clearly a lie, because getrenamedfn() didn't. That made e.g. `hg log -T {file_copies}` unbearably slow. This patch fixes that. Differential Revision: https://phab.mercurial-scm.org/D6541

relnotes: document template support for `hg root` Differential Revision: https://phab.mercurial-scm.org/D6540

remotefilelog: tell runbgcommand to not block on child process startup These two invocations will always find a binary because they're re-running hg. As a result, we can skip waiting for the subprocess to start running and save a little bit of wall-time. Differential Revision: https://phab.mercurial-scm.org/D6539

procutil: allow callers of runbgcommand to assume the process starts Experimentally starting the subprocess can take as much as 40ms, and for some of our use cases that's frivolous: we know the binary will start, and if it doesn't we'd only ever ignore it and continue anyway. This lets those use cases be faster. Differential Revision: https://phab.mercurial-scm.org/D6537

shallowrepo: remove backwards compat code that predates in-tree remotefilelog Differential Revision: https://phab.mercurial-scm.org/D6538

commit: make the error message more specific while aborting branch closing Differential Revision: https://phab.mercurial-scm.org/D6493

commit: add a check if it is trying to close an already closed branch head It would check if the revision we are going to close is already a closed branch head and print the error message accordingly. Differential Revision: https://phab.mercurial-scm.org/D6491

strip: move checksubstate() to mq (its only caller) Differential Revision: https://phab.mercurial-scm.org/D6536

strip: use bailifchanged() instead of reimplementing it This also means that we get the standard error messages (see changed test cases). Differential Revision: https://phab.mercurial-scm.org/D6535

strip: remove unused excsuffix argument from checklocalchanges() It was only used by mq, and mq now has its own copy of the function. Differential Revision: https://phab.mercurial-scm.org/D6534

mq: remove dependency on strip's checklocalchanges() Some of the functionality in strip.checklocalchanges() was only used by mq, so let's move it to mq so we can clean up strip. Differential Revision: https://phab.mercurial-scm.org/D6533

copies: avoid calling matcher if matcher.always() When storing copy information in the changesets (experimental.copies.read-from=changeset-only), this patch speeds up hg debugpathcopies FENNEC_58_0_2_BUILD1 FIREFOX_59_0b8_BUILD2 from 5.9s to 4.7s. At the start of this series (b162229e), that command took 18min. Differential Revision: https://phab.mercurial-scm.org/D6422

copies: avoid unnecessary copying of copy dict When storing copy information in the changesets, this patch speeds up hg debugpathcopies FENNEC_58_0_2_BUILD1 FIREFOX_59_0b8_BUILD2 from 11s to 5.9s. That command takes 6.2s when storing copy information in filelogs. Differential Revision: https://phab.mercurial-scm.org/D6421

copies: don't filter out copy targets created on other side of merge commit If file X is copied to Y on one side of merge and the other side creates Y (no copy), we would not mark that as copy. In the changeset-centric pathcopies() version, that was done by checking if the copy target existed on the other branch. Even though merge commits are pretty uncommon, it still turned out to be too expensive to load the manifest of the parents of merge commits. In a repo of mozilla-unified converted to storing copies in changesets, about 2m30s of `hg debugpathcopies FIREFOX_BETA_59_END FIREFOX_BETA_60_BASE` is spent on this check of merge commits. I tried to think of a way of storing more information in the changesets in order to cheaply detect these cases, but I couldn't think of a solution. So this patch simply removes those checks. For reference, these extra copies are reported from the aforementioned command after this patch: browser/base/content/sanitize.js -> browser/modules/Sanitizer.jsm testing/mozbase/mozprocess/tests/process_normal_finish_python.ini -> testing/mozbase/mozprocess/tests/process_normal_finish.ini testing/mozbase/mozprocess/tests/process_waittimeout_python.ini -> testing/mozbase/mozprocess/tests/process_waittimeout.ini testing/mozbase/mozprocess/tests/process_waittimeout_10s_python.ini -> testing/mozbase/mozprocess/tests/process_waittimeout_10s.ini Since these copies were created on one side of some merge, it still seems reasonable to include them, so I'm not even sure it's worse than filelog pathcopies(), just different. Differential Revision: https://phab.mercurial-scm.org/D6420

copies: do full filtering at end of _changesetforwardcopies() As mentioned earlier, pathcopies() is very slow when copies are stored in the changeset. Most of the cost comes from calling _chain() for every changeset, which is slow because it needs to read manifests. It needs to read manifests to be able to filter out copies that are were created in one commit and then deleted. (It also filters out copies that were created from a file that didn't exist in the starting revision, but that's a fixed revision across calls to _chain(), so it's much cheaper.) This patch changes from _chainandfilter() to just _chain() in the main loop in _changesetforwardcopies(). It instead removes copies that have subsequently been removed by using ctx.filesremoved(). We thus rely on that to be fast. It timed this command in mozilla-unified: hg debugpathcopies FIREFOX_59_0b3_BUILD2 FIREFOX_BETA_59_END It took 18s before and 1.1s after. It's still faster when copy information is stored in filelogs: 0.70s. It also still gets slow when there are merge commits involved, because we read manifests there too. We'll deal with that later. Differential Revision: https://phab.mercurial-scm.org/D6419

rust-filepatterns: add comment about Windows path handling As I replied to the Phabricator message, this is wrong. And I even suspect it wouldn't compile because of multiple type mismatches. I think, in Rust where type system is rock solid, we can live with UTF-8 strings except for the bottom storage layer and the top UI/command layer. We'll still have to get around undecodable characters not to be lost, but I think it's okay to drop such filenames from match result if they don't match in UTF-8 world, not in Latin-1 world.

rust-filepatterns: silence warning of non_upper_case_globals

rust: update Cargo.lock to include @generated comment cargo 1.34.0 of Debian sid inserts this comment, and I'm tired of reverting the change every time I do make local. https://github.com/rust-lang/cargo/commit/bd0e4a08471b8bc7957829b4fd294b8985d4fa2d

merge with stable

cborutil: fix streamencode() to handle subtypes Otherwise the template filter 'cbor' could crash because of bytes subclass: ValueError: do not know how to encode <class 'mercurial.encoding.safelocalstr'>

lfs: correct an error in the TODO file