profiling: move 'fp' closing logic into its own function We are about to make the logic more robust and reuse it in more place, we start by isolating what we have.

py3: use python3 hg in test-py3-commands.t at places where py2 hg was used This patch fixes my mistakes where I added test in test-py3-commands.t as `hg ...` where I forgot hg here refers to Python 2 mercurial.

test-dirstate-race: back out changeset c82fa7efcbc8 This is non-deterministic. In any case, I switched to using debugrebuilddirstate in my WIP patches, which makes this moot.

revset: fix order of first/last members in compound expression (BC) Suppose len(subset) >> len(ls) in common cases, 'subset & ls' should be avoided whenever possible.

revset: filter first/last members by __and__ operation This replaces 'if y in subset' with '& subset'. first(null) and last(wdir()) are fixed thanks to fullreposet.__and__. This also revealed that first() and last() don't follow the order of the input set. 'ls & subset' is valid only if the ordering requirement is 'define' or 'any'. No performance regression observed: revset #0: limit(0:9999, 100, 9000) 0) 0.001164 1) 0.001135 revset #2: 9000 & limit(0:9999, 100, 9000) 0) 0.001224 1) 0.001181 revset #3: last(0:9999, 100) 0) 0.000237 1) 0.000199

revset: reject negative number to select first/last n members Negative 'lim' doesn't make sense here, and it makes things complicated when using list[:lim].

revset: fix order of last() n members where n > 1 (BC) last() is implemented using a reversed iterator, so the result should be reversed again. I've marked this as BC since it's quite old bug seen in 3.0. The first bad revision is 4849f574aa24 "revset: changed last implementation to use lazy classes."

debugrevspec: add option to suppress list of computed revisions Test will be added later.

debugrevspec: add option to print representation of smartset object It's possible by -v, but -v also prints a parsed tree. Test will be added later.

help: correct description of "glob:foo/*" matching Unlike what the description says, it does not match recursively. Also add an example of "glob:foo/**" (which does match recursively).

bookmarks: make sure we close the bookmark file after reading We previously lacked an explicit close of the bookmark file.

bookmarks: rephrase a comment to be shorted and clearer The initial motivation is that I need an initial level of indent in the next changeset o:-) It turn out I like the new version better.

checkheads: use a "lazyancestors" object for allfuturecommon Instead of walking all ancestors to compute the full set we now check membership lazily. This massively speed. On a million-ish revision repository, this remove 14 seconds from the push logic, making the checkheads function disappear from profile.

checkheads: use "revnum" in the "allfuturecommon" set The obsolete post-processing needs to know the extend of the pushed set. The way it is implemented is... suboptimal. It build a full set of all nodes in the pushset and it does so using changectx. We have much better API for this now. The simplest is to use the existing lazy ancestors computation. That logic uses revnum and not node (for good reason) so we start with updating the post-processing code to handle a "allfuturecommon" set containing revision numbers.

checkheads: use 'nodemap.get' to convert nodes to revs We are about to call 'torev' on node that might be locally missing. In this case, 'nodemap.revs' will return None (something valid in our usecase) while 'changelog.rev' would raise an exception. We make this change in a distinct changeset to show it does not impact the tests.

checkheads: pass "ispushed" function to the obsmarkers logic We are about to make "allfuturecommon" a set of revs instead of a set of nodes. The function updated in this patch do not needs to know about these details so we just pass it a 'ispushed(node)' function. This will simplify the next changeset.

profile: drop maybeprofile It seems sufficiently simple to use "profile(enabled=X)" to not justify having a dedicated context manager just to read the config. (I do not have a too strong opinion about this).

profile: support --profile in alias and abbreviated version (--prof) We now process the "--profile" a second time after alias has been processed and the command argument fully parsed. If appropriate we enable profiling at that time. In these situation, the --profile will cover less than if the full --profile flag was passed on the command line. This is better than the previous behavior (flag ignored) and still fullfil multiple valid usecases.

profile: make the contextmanager object available to the callers This will allow calling methods on the object in the code using the context manager.

profile: introduce a knob to control if the context is actually profiling This is a step toward allowing context where the profiling in enabled withing the context range. This also open the way to kill the dedicated "maybeprofile" context manager and keep only one of 'profile' and 'maybeprofile'.

profile: introduce a "start" method to the profile context The start method is doing all profiler setup and activation. It is currently unconditionally called by '__init__' but this will be made more flexible in later changesets.

profile: upgrade the "profile" context manager to a full class So far we have been able to use a simple decorator for this. However using the current context manager makes the scope of the profiling in dispatch constrainted and the time frame to decide to enable profiling quite limited (using "maybeprofile") This is the first step toward the ability to enable the profiling from within the profiling scope. eg:: with maybeprofiling(ui) as profiler: ... bar.foo(): ... if options['profile']: profiler.start() ... fooz() ... My target usecase is adding support for "--profile" to alias definitions with effect. These are to be used with "profiling.output=blackbox" to gather data about operation that get slow from time to time (eg: pull being minutes instead of seconds from time to time). Of course, in such case, the scope of the profiling would be smaller since profiler would be started after running extensions 'reposetup' (and other potentially costly logic), but these are not relevant for my target usecase (multiple second commits, multiple tens of seconds pull). Currently adding '--profile' to a command through alias requires to re-spin a Mercurial binary (using "!$HG" in alias), which as a significant performance impact, especially in context where startup performance is being worked on... An alternative approach would be to stop using the context manager in dispatch and move back to a try/finally setup.

setup: avoid linker warnings on Windows about multiple export specifications The PyMODINIT_FUNC macro contains __declspec(dllexport), and then the build process adds an "/EXPORT func" to the command line. The 64-bit linker flags this [1]. Everything except zstd.c and bser.c are covered by redefining the macro in util.h [2]. These modules aren't built with util.h in the #include path, so the redefining hack would have to be open coded two more times. After seeing that extra_linker_flags didn't work, I couldn't find anything authoritative indicating why, though I did see an offhand comment on SO that CFLAGS is also ignored on Windows. I also don't fully understand the interaction between msvccompiler and msvc9compiler- I first subclassed the latter, but it isn't used when building with VS2008. I know the camelcase naming isn't the standard, but the HackedMingw32CCompiler class above it was introduced 5 years ago (and I think the current style was in place by then), so I assume that there's some reason for it. [1] https://support.microsoft.com/en-us/help/835326/you-receive-an-lnk4197-error-in-the-64-bit-version-of-the-visual-c-compiler [2] https://bugs.python.org/issue9709#msg120859

memctx: always use cache for filectxfn I don't see a downside to doing this unless I'm missing something. Thanks to foozy for correcting my previous bad logic.

test-hardlinks: stabilize for Windows This broke in c2cb0de25120, which breaks hardlinks when the executable bit is toggled.

releasenotes: add more tests for formatting and merging of release notes

releasenotes: command to manage release notes files Per discussion on the mailing list, we want better release notes for Mercurial. This patch introduces an extension that provides a command for producing release notes files. Functionality is implemented as an extension because it could be useful outside of the Mercurial project and because there is some code (like rst parsing) that already exists in Mercurial and it doesn't make sense to reinvent the wheel. The general idea with the extension is that changeset authors declare release notes in commit messages using rst directives. Periodically (such as at publishing or release time), a project maintainer runs `hg releasenotes` to extract release notes fragments from commit messages and format them to an auto-generated release notes file. More details are explained inline in docstrings. There are several things that need addressed before this is ready for prime time: * Moar tests * Interactive merge mode * Implement similarity detection for individual notes items * Support customizing section names/titles * Parsing improvements for bullet lists and paragraphs * Document which rst primitives can be parsed * Retain arbitrary content (e.g. header section/paragraphs) from existing release notes file * Better error messages (line numbers, hints, etc)

packagelib: use LANGUAGE=C for "hg version" If "hg version" does not contain "version" (e.g. Japanese), $hgversion was empty and rpmbuild failed.

rpms: add hgdemandimport in files

rpms: remove '%if "%{?pythonver}" != "2.4"' Mercurial requires python >= 2.7.

obsstore: do not load all markers to detect duplication This will make duplication detection something like O(newmarkers) instead of O(obsstore).

clonebundles: reference correct config option This option is no longer experimental.

filestat: move __init__ to frompath constructor We're going to add a `fromfp` constructor soon, and this also allows a filestat object for a non-existent file to be created.

test-dirstate-race: ensure that a isn't in the lookup set at the end We're going to rely on this in upcoming patches.

hghave: add test for whether fsmonitor is enabled This uses the HGFSMONITOR_TESTS environment variable that fsmonitor-run-tests.py adds.

tests: add a wrapper to run fsmonitor tests This script does a bunch of non-trivial configuration work: in particular, it sets up an isolated instance of Watchman which isn't affected by global state and can be torn down on completion. This script also sets the HGFSMONITOR_TESTS environment variable, which hghave will use in the next patch to allow gating on whether fsmonitor is enabled. With fsmonitor enabled, there appear to be a number of failures in the test suite. It's not yet clear to me why they're happening, but if someone would like to jump in and fix some of them I hope this will be helpful for that.

setdiscovery: improves logged message The 'srvheads' list contains all server heads including the common ones. We adjust 'ui.log' message to provide more useful information about server heads locally unknown. The performance impact of turning the list to set is negligible (about 1e-4s) compared to the rest of the discovery cost, so I'm taking the easy path.

tests: handle variation between pure and normal output in annotate --skip I'm pretty sure that both results are valid, depending on how you slice the edits.

bisect: improve option validation message

context: inline makememctx (API) I have always thought it weird that we have a helper method instead of just using __init__. So, I ripped it out.

context: add convenience method for returning a memfilectx from a patch This is mostly a copy of what makememctx does but refactored to make it behave more like our other convenience methods.

memctx: refactor inline getfilectx into convenience method No actual logic is changing, just moving code so __init__ is easier to read.

hgweb: refresh styling of gitweb's search form gitweb was missing the hint hover box. So that was added. Also, the positioning of the form was absolute and it didn't vertically align on all pages. The element has been moved inline with the navigation links (which now are contained in a div) and flexbox is used to obtain sane alignment of the navigation links and search form. For those new to flexbox, "justify-content: space-between" basically says to maximize space elements. You can use it to easily get left and right justified containers without having to worry about width, floating, etc. "align-items: center" centers all items in a cross-axis. I've literally wasted hours trying to figure out both these problems before flexbox. Flexbox is amazing. Flexbox has been supported by Chrome and Firefox for a few years. But it is only supported by IE 11. I'm willing to wager that people using this either won't be using IE or will be using IE 11. So I'm willing to be a bit aggressive in adopting flexbox because it makes CSS alignment so much easier.

hgweb: consistently add search form to all gitweb pages Paper has it on all pages. Not sure why gitweb doesn't. I think it should be everywhere because it is a useful feature. Also, we weren't consistently adding the HTML in the same place. This was OK since the element is absolutely positioned. But this bothered me a bit, so I went ahead and fixed it.

hgweb: consolidate search form for gitweb

hgweb: consolidate search form for monoblue Same deal as for paper.

hgweb: consolidate search form for paper AFAICT this was mostly a bunch of copy pasta. The only variation is some pages defined a "value" attribute. The "query" variable will just be empty on pages that don't accept it. So let's consolidate the template and remove the redundancy.

test-extension: fix load path for Windows The previous code was trying to load the extension from /tmp/hgtests.xxx/..., but the actual path for tests is C:\Users\...\Temp\hgtests.xxx\... I assume that the former is an MSYS path that maps somewhere under C:\MinGW.

test-setdiscovery: stabilize for Windows Windows wants double quotes here.

convert: correct the documentation about whitespace in branchmap branches Might as well let the users know they can get rid of branch names with spaces.

py3: use pycompat.bytestr() instead of str()

py3: convert bool variables to bytes

context: avoid writing outdated dirstate out (issue5584) Before this patch, workingctx.status() may cause writing outdated dirstate out, if: - .hg/dirstate is changed simultaneously after last loading it, - there is any file, which should be dirstate.normal()-ed Typical issue case is: - the working directory is updated by "hg update" - .hg/dirstate is updated in background (e.g. fsmonitor) This patch compares identities of dirstate before and after acquisition of wlock, and avoids writing outdated dirstate out, if change of .hg/dirstate is detected.

tests: factor external procedures out for portability Fortunately, "&&" is treated as "execute next, if previous doesn't fail" both on POSIX and Windows. But keeping portability of "dirstaterace.command" manually is troublesome. This patch factors external procedures out as a shell script for portability. "sh SCRIPT" always allows scripting in POSIX style. This change is also for convenience. Fixed script name can reduce command line arguments. "r" prefix is needed for "sh '$TESTTMP/dirstaterace.sh'", because $TESTTMP contains backslash on Windows.

dirstate: add identity information to detect simultaneous changing in storage This identity is used to examine whether dirstate is simultaneously changed in storage after previous caching (see issue5584 for detail). util.cachestat can't be used for this purpose, because it has no valuable information on Windows. On the other hand, util.filestat can detect changing dirstate in storage certainly, regardless of platforms. https://www.mercurial-scm.org/wiki/ExactCacheValidationPlan Strictly speaking, if underlying filesystem doesn't support ctime/mtime, util.filestat can't detect simultaneous changing in storage as expected. But simultaneous changing on such (very rare) platform can't be detected regardless of this patch series. Therefore, util.filestat should be reasonable identity for almost all usecases.

util: make filestat.__eq__ return True if both of self and old have None stat For convenience to compare two filestat objects regardless of None-ness of stat field.

vfs: create copy at renaming to avoid file stat ambiguity if needed In order to fix issue5418, bff5ccbe5ead made vfs.rename(checkambig=True) omit advancing mtime of renamed file, if renamed file is owned by another (EPERM is raised in this case). But this omission causes rewinding mtime at restoration in such situation, and makes avoiding file stat ambiguity difficult, because ExactCacheValidationPlan assumes that mtime should be advanced, if a file is changed in same ctime. https://www.mercurial-scm.org/wiki/ExactCacheValidationPlan Ambiguity of file stat also requires issue5584 to be fixed with other than file stat, but "hash of file", "generation ID" and so on were already rejected ideas (please see original RFC linked from "Outline of issue" in ExactCacheValidationPlan page). This omission occurs: - only for non append-only files (dirstate, bookmarks, and phaseroots), and - only if previous transaction is rollbacked by another user The latter means "sharing a repository clone via group permission". This is reasonable usecase, but not ordinary for many users, IMHO. "hg rollback" itself has been deprecated since Mercurial 2.7, too. Therefore, increasing the cost at rollbacking previous transaction executed by another a little seems reasonable, for avoidance of file stat ambiguity. This patch does: - create copy of (already renamed) source file, if advancing mtime fails for EPERM - rename from copied file to destination file, and - advance mtime of renamed file, which is now owned by current user This patch also factors "self.join(src)" out to reduce redundancy.

vfs: factor out "rename and avoid ambiguity" to reuse This makes subsequent patch simple.

util: make filestat.avoidambig() return whether ambiguity is avoided or not

debugcommands: issue warning when repo has secret changesets (issue5589) This seems like a prudent thing to do. As the inline comment says, we may want to make this abort once the functionality is stabilized as part of `hg bundle`. Let's save that debate for another day.