histedit: always abort with same message when working dir is wrong. Using only one message makes live easier for translators. The clearer error message was supposed by Augie Fackler.

histedit: report when revisions to edit are not ancestors of working dir Editing the history only is possible when the working dir is a descendant of the revisions to edit. When this happens explain it by writing abort: %s is not an ancestor of working directory

Merge

manifestmerge: handle abort on local unknown, remote created files This replaces the _checkunknown call in calculateupdates with a more performant version. On a repository with over 150,000 files, this speeds up an update by 0.6-0.8 seconds, which is up to 25%. This does not introduce any UI changes. There is existing test coverage for every case, mostly in test-merge*.t.

manifestmerge: pass in branchmerge and force separately This will be used in an upcoming patch.

manifest: use a size 3 LRU cache to store parsed manifests Previously, the manifest cache would store the last manifest parsed. We could run into situations with operations like update where we would try parsing the manifest for a revision r1, then r2, then r1 again. This increases the cache size to 3 to avoid that bit of performance fragility.

util: add an LRU cache dict In certain cases we would like to have a cache of the last N results of a given computation, where N is small. This will be used in an upcoming patch to increase the size of the manifest cache from 1 to 3.

tests: remove last two check-code warnings about killdaemons Removes the last of the warnings in test-check-code-hg.t introduced in 667063b22a69.

tests: guard against obsolete markers in the hg repo itself If obsolete markers appear in the hg repo (because of enabling evolve), then tests that run hg against the hg repo itself will see warnings like: obsolete feature not enabled but 4 markers found! As far as I can tell, this only occurs in test-check-code-hg.t -- in particular, it will -not- show up on tests that run against test-created repos, as most of the test suite does.

largefiles: make caching largefiles message more explicit In some cases, caching largefiles may take a long time (if the user has pulled a lot of new heads). This patch makes it more clear what is happening, by showing the number of heads we are caching largefiles for.

largefiles: document behavior of caching largefiles for new heads

check-code: add Makefile target to run check-code

byterange: remove now-unused sys import

test-obsolete.t: migrate to killdaemons from kill `cat pidfile`

test-inotify.t: migrate to killdaemons from kill `cat pidfile`

test-inotify-lookup.t: migrate to killdaemons from kill `cat pidfile`

test-inotify-issue1556.t: migrate to killdaemons from kill `cat pidfile`

test-inotify-issue1542.t: migrate to killdaemons from kill `cat pidfile`

test-inotify-issue1371.t: switch to killdaemons from kill `cat pidfile`

test-inotify-debuginotify.t: migrate to killdaemons from kill `cat pidfile`

test-hgweb-raw.t: use killdaemons instead of kill `cat pidfile`

test-https.t: stop using kill `cat $pidfile`

changelog: hexlify node when throwing a LookupError on a filtered node The non-hexlified node was leaking all the way out to the web interface, and wasn't consistent with the behavior for nonexistent nodes.

byterange: remove old two-arg raise trick We don't care about the original traceback, and this was frustrating any efforts to make the code work on Python 3.3.

revlog: document v0 format

merge crew heads

merge with mpm stable

templater: add get() function to access dict element (e.g. extra)

templates: export extra as a dict to templates Currently only useful with the json filter.

Added signature for changeset 7511d4df752e

Added tag 2.5.1 for changeset 7511d4df752e

merge with i18n

i18n-de: fix duplicated shortcut key b for record (edit and quit) Use e for edit instead.

check-code: fix platform-specific error code variance test-check-code-hg.t uses xargs to invoke check-code.py on every file in 'hg manifest'. The return code from xargs varies between BSD xargs and GNU xargs: BSD will return 1 if any invocation exits with an error code; GNU xargs will return 123 in this case. This normalizes the exit code back to 1.

check-code: warn to use killdaemons instead of kill `cat PIDFILE` We have a bunch of tests that still use kill `cat hg.pid` or worse, kill `cat hg.pid`; while kill -0 `cat hg.pid`; sleep 0; done Cleaning these up to use tests/killdaemons.py is non-trivial, so for now we just add a warning.

largefiles: docstrings for verify methods

largefiles: fold oddly named _verify into remotestore.exists

git convert: some versions of git use fatal: instead of error: I saw this behavior with git 1.7.12 on my Mac.

test-convert-git: stabilize corruption of test git repo This error would show up only intermittently since the test depended on the order of the directories returned by os.walk. The damage repository test would delete the first object file it came across. However, the order of the directory listing is arbitrary (it seems to depend on the filesystem). This meant that sometimes a commit object was deleted, sometimes a blob object and sometimes a tree object. So, fix by hardcoding which object to delete. Delete a commit object, a blob object and a tree object in three separate tests.

convert/git: catch errors from modern git-ls-remote (issue3428) Since git v1.7.8.2-327-g926f1dd (the change was first released in git 1.7.10), git does not return non-zero when "git ls-remote --tags ..." is run and the repository is damaged. This causes the "damaged repository with missing commit" test in test-convert-git.t to unexpectedly succeed. Fix by aborting if git outputs any lines beginning with "error:", which required adding some subprocess use in convert/git.py.

merge with stable

incoming: fix incoming when a local head is remotely filtered (issue3805) In its current state discovery may return (remotely) filtered elements in "common". This has usually no impact as "missing" is kept clear of filtered elements. However when the "remote" repo is a local repo (disk accessible, and directly created in memory) the incoming code takes a shortcut and directly uses the "remote" repo to generate the incoming output. When some common elements are filtered this led to a crash. We now ensure we use an unfiltered repository to generate the incoming output. This does not change the behavior as missing is clear of filtered revision. Now that we have proper low level filtering, incoming code needs a deeper cleanup but it is already planned.

dirstate: move pure python dirstate packing to pure/parsers.py

bookmark: don't allow integers as bookmark/branch/tag names Bookmarks/branches/tags shouldn't be allowed to be integers because that overlaps with revision numbers. Right now if a user created one they can't use it anyway because the revision numbers take precedence. The check only happens when creating a new bookmark/etc from a command so it shouldn't affect existing bookmarks/branches/tags or importing branches from git. This fix was prompted by us having a user create a bookmark named "404" then accidentally checkout a very old version of our repository.

run-tests: do not fail on empty tsttest file Initialize n for not failing on empty tsttest files.

merge with stable

hgweb: make 'summary' work with hidden changesets (issue3810) Since the 'summary' view used by e.g. gitweb and monoblue shows both a changelog and a bookmarks list, the same changes are needed here as were made to the 'changelog' and 'bookmarks' web commands (56ca4443a343 and 886936ecc21b, respectively).

merge with stable

hgk: support the old way of getting the current Ttk theme (issue3808) It seems like the API has changed somewhere around 8.5.7, so the preferred way of getting the current theme is now [ttk::style theme use], while the deprecated (but still working) is $::ttk::currentTheme.

addremove: don't perform m.exact/rel until needed Moves the m.exact and m.rel calls within the conditionals they are used in. On a large repo this brings addremove from 7.1 seconds down to 6.3 (13%).

addremove: don't call lexists, isdir, and islink The dirstate walk results contain the stat information for each path, so we don't need to query it again. On a large repo this makes addremove go from 8.35 seconds to 7.1 (15%).

addremove: only query dirstate once per path Previously the addremove code queried the dirstate 4 times per path. Now it only does so once. On a large repo this brings addremove from 9.5 seconds to 8.35 seconds (12%).

tests: fix windows test failure with largefiles

merge with stable

tests: fix windows test failure in test-subrepo.t

merge with stable

largefiles: don't crash when trying to find default dest for url without path b32e55e6c3c7 introduced a crash when cloning a url without path - where util.url().path would be None. This None will now be handled as ''. clone will thus abort with 'repository / not found' as before.

hgweb.cgi: fix internal WSGI emulation (issue3804) The internal WSGI emulation in wsgicgi.py was not fully WSGI compliant and assumed that all responses sent a body. With 3fbdbeab38cc that caused a real bug when using hgweb.cgi. wsgicgi.py will now make sure headers always are sent, using the pattern from PEP 333 and similar to how it is done in c007e5c54b16.

bdiff: simplify overflow checks Rather than check that each delta start, end, and length is within 32 bits, we simply check that the input strings are under 4GB.

Merge crew-stable into crew