help: describe more detail about capabilities while deciding merge tool "hg help merge-tools" describes as below: (internal merge tools) will by default not handle symlinks or binary files. But in some cases, Mercurial assumes that internal merge tools have one or both of these capabilities. "hg help merge-tools" also describes as below, for matching patterns in merge-patterns configuration section. But this is not sufficient. Here, binary capabilities of the merge tool are not considered. This patch describes more detail about capabilities while deciding merge tool.

tests: un-glob patchbomb test lines that were only globbing a hostname Differential Revision: https://phab.mercurial-scm.org/D4296

tests: force a stable hostname in patchbomb tests No visible output changes in this commit because everything is globbed away, but on Python 3 the stable hostname will mean that the headers don't trigger RFC2822 multi-line mode because they'll always be consistently short. Differential Revision: https://phab.mercurial-scm.org/D4295

patchbomb: allow using HGHOSTNAME to force a hostname I'll update run-tests.py to set this globally to stabilize some tests. The variable name is intentionally generic because I suspect we should generalize this to other tests. Differential Revision: https://phab.mercurial-scm.org/D4294

patchbomb: extract function for generating message-id Differential Revision: https://phab.mercurial-scm.org/D4293

rebase: cover restorestatus() by lock to prevent it from being updated To prevent it from being updated by another process `restorestatus()` is moved under lock. Differential Revision: https://phab.mercurial-scm.org/D4282

branchmap: load branchmap as an iterable This avoids reading all the file into memory if the cache turns out to be invalid. Differential Revision: https://phab.mercurial-scm.org/D4281

perf: time loading branchmap caches Differential Revision: https://phab.mercurial-scm.org/D4280

tests: add conditional output when simplestore extensions is loaded This drops the number of failures with this extension to 3. Differential Revision: https://phab.mercurial-scm.org/D4286

tests: conditionalize extension tests for extra extensions If extra extensions are loaded (e.g. via --extra-config-opt), the tests conditionalized in this commit fail in ways that are dependent on the extensions that are loaded. So let's skip them when that scenario is present. This drops the number of failures for the simplestorerepo.py extension to 4. Differential Revision: https://phab.mercurial-scm.org/D4285

commit: try hard to reuse p1 manifest if nothing changed This is all for commit reproducibility on "hg convert". With this change, p1 manifest is reused if ctx.files() *to be committed* is empty, and if new manifest entry is identical to p1. This is important property for "hg convert" since memctx.files() built from a convert source may be either a) more narrowed thanks to a committed ctx.files() which provides more accurate status, or b) containing redundant files because of sloppy filtering on e.g. octopus merge.

merge: add tests for commit with no content change It isn't easy to say when to reuse the p1 manifest. Basically, that's only when wctx.files() is empty, but we need to know that wctx.files() is not the same as repo['.'].files() after the commit. This patch adds several examples of commits with empty ctx/wctx.files(). I don't think this is exhaustive, but it contains at least one failure mode in which a converted repo result in a different hash. I also note that the manifest revlog does NOT follow the DAG shape of the changelog since p1 manifest is reused if wctx.files() is empty even at merge. I don't know whether it is intentional or not, but it's the behavior since 2011, 301725c3df9a "localrepo: reuse parent manifest in commitctx if no files have changed."

commit: add debug message regarding manifest reuse

mail: convert encoding.encoding to sysstr

mail: call s.decode('ascii') explicitly to see if s is an ascii bytes

mail: pass in addr to _addressencode() in bytes _addressencode() doesn't process a unicode addr well. For example, acc.encode('ascii') would raise UnicodeEncodeError if acc was a unicode. This patch temporarily restores the pre-952bf3c948f0 _addressencode(). Several tests would be broken on Python 3.

mail: remove redundant bytesurl() from addrlistencode() _addressencode() returns a bytes.

patchbomb: really use BytesGenerator API It wraps around Generator type.

byteify-strings: prevent "__name__ == '__main__'" from being transformed This was okay for import-time code transformer, but shouldn't be applied to source code.

merge with stable

rebase: turn off inmemory flag on --stop Guessing from the inline comment, "in-memory rebase is not compatible with resuming rebases", in-memory rebasing should be disabled.

rebase: use action variable to select things to do

rebase: consolidate check for --dry-run/--confirm on abort/stop/continue

rebase: consolidate check for --abort/--stop/--continue conflicts

rebase: do not set internal dryrun flag by --confirm This prepares for cleaning up option checking.

rebase: add test to show --stop moves bookmarks Added tests to show that --stop option moves bookmarks of rebased csets to their succs. Differential Revision: https://phab.mercurial-scm.org/D3982

rebase: include --stop option in documentation Differential Revision: https://phab.mercurial-scm.org/D3970

rebase: raise error for options conflicting with --stop Make sure --stop feature raise error for conflicting options --continue, --abort, --confirm, --dry-run. Tests are added to reflect the same. Differential Revision: https://phab.mercurial-scm.org/D3969

rebase: add --stop option to stop rebase at any point (issue5206) Before this patch, during a rebase if you get a point where you can't figure out what to do next, then either you had to complete your series or abandon all the work you have done during this rebase. Now, with this feature you can stop at any point by keeping the rebased csets and mark original csets as obsolete. And if you don't have evolution extension enabled then you can use --keep option as an alternative which will keep original csets too, instead of marking them obsolete. Differential Revision: https://phab.mercurial-scm.org/D3959

statprof: cleanup string construction Use string substitutions instead of string additions.

addremove: add associated color for the new labels We use classic color: green is added, red is removed.

remove: add a label for messages about removed files Keeping consistency between addremove and remove seems a good idea.

add: add a label for messages about added files Keeping consistency between addremove and add seems a good idea.

addremove: add labels for messages about added and removed files This is the first step to add color for add and remove output.

revlog: filter out "invalid" delta base candidates There are bases that we know won't produce a good delta chain. For example, if the base is already bigger than twice the size of the text we store, we know the resulting delta chain will never be valid. We might make the check a bit more powerful and generic in the future, but this looks a good start. In particular, empty file (size 0) will never find a good base, so we should stop spending time trying to find one.

revlog: use a symbolic constant for the deltas/text ration We are about to use it somewhere else, we should as well make it easier to access and change.

revlog: do not search for delta for empty content We won't find any useful base to store an empty text. So we should not even try to.

revlog: split and document good delta conditional The logic is still identical, but having each conditional on its own helps to document them and will help to edit them in the future.

revlog: skip over empty revision when looking for delta base There is no point in keeping an empty revision in the middle of a chain since they won't contribute any data. So we filter them out when looking for a valid base delta.

debugrevlog: display details about empty revision We now display details about the course of emptiness (empty text or empty delta).

debugrevlog: track empty revlog entries A revlog entry can be "empty" for two reasons: * the stored text is empty * we found another entry with the exact same content Tracking them separately make revlog content clearer.

debugrevlog: document some of the variable used This help to understand the code.

revlog: drop compatibility for `revlog.descendant` (API) As advertised, the method is dropped in 4.8.

context: drop compatibility for `context.descendant` (API) As advertised, the method is dropped in 4.8.

cmdutil: remove _updatecleanmsg() which is no longer used anywhere

cmdutil: fix weird indent in _mergemsg()

cext: fix a warning about differing const qualifiers on Windows The prototype takes a 'void *', but self->offsets is a 'const char **'. mercurial/cext/revlog.c(2011) : warning C4090: 'function' : different 'const' qualifiers

cext: fix most truncation warnings in revlog on Windows There's one more, and I'm not sure why it isn't being tripped on other platforms: mercurial/cext/revlog.c(430) : warning C4244: '=' : conversion from 'Py_ssize_t' to 'char', possible loss of data

cext: fix Windows warning about implicit conversion of 32-bit shift to 64 bit mercurial/cext/revlog.c(1541) : warning C4334: '<<' : result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift int ended?)

index: make capacity argument to nt_init be measured in revisions The nodetree's internal capacity field is measures in nodetree nodes, which is not something the caller should have to know about. Differential Revision: https://phab.mercurial-scm.org/D4166

index: avoid duplicating capacity-growth expression We were duplicating the "*2" instead of reusing it. It's overflow-safe to reuse as long as the growth factor (i.e. currently 2) is not larger than sizeof(nodetreenode) (currently 64 or 128). Differential Revision: https://phab.mercurial-scm.org/D4165

index: move check for too large capacity into nt_init() It's clearer to have the check just before the allocation happens. Differential Revision: https://phab.mercurial-scm.org/D4164

shortest: don't include nullid in disambigution revset As noted by Yuya in the review of D4118, the fact that the nodetree always contains the nullid is not what we want for the disambiguation case. It's not what the pure version of the code does. Note that the updated test also passes before this patch, but it wouldn't have passed in native-code mode once we start using the nodetree for disambiguating nodeid prefixes. Differential Revision: https://phab.mercurial-scm.org/D4163

index: don't include nullid in the internal "length" field This is a follow-up to 781b2720d2ac (index: don't include nullid in len(), 2018-07-20). I intentionally didn't update the "index stats", so it will also not include the space for nullid after this patch. Differential Revision: https://phab.mercurial-scm.org/D4162

tests: add test coverage for revlogindex[-1] which was previously missing Differential Revision: https://phab.mercurial-scm.org/D4184

context: safegaurd from 'lx' being passed as file flag in manifest Follows up for d558e53cd6b619d5f671a7580513bfc66a398eac. Differential Revision: https://phab.mercurial-scm.org/D4259

debugcommands: urlerror only has a read() method in Python 2 Differential Revision: https://phab.mercurial-scm.org/D4258

debugcommands: get_method should always return a sysstr Differential Revision: https://phab.mercurial-scm.org/D4257

stringutil: if we get a memoryview in escapestr, coerce it to bytes Otherwise we get an exception. Sadly, this manifesting deep inside the wireproto code, inside a future. For some reason the exception was /causing a hang/ rather than actually propagating out, which seems like it might merit some investigation in the future. Differential Revision: https://phab.mercurial-scm.org/D4256

debugcommands: fix a missing b prefix This wasn't causing any immediate problems because of the source transformer, but I noticed the inconsistency and it bugged me. # skip-blame just a b prefix Differential Revision: https://phab.mercurial-scm.org/D4255