tests: extend check-commit self-tests This now contains both positive and negative tests for almost all the check-commit rules.

encoding: handle UTF-16 internal limit with fromutf8b (issue5031) Default builds of Python have a Unicode type that isn't actually full Unicode but UTF-16, which encodes non-BMP codepoints to a pair of BMP codepoints with surrogate escaping. Since our UTF-8b hack escaping uses a plane that overlaps with the UTF-16 escaping system, this gets extra complicated. In addition, unichr() for codepoints greater than U+FFFF may not work either. This changes the code to reuse getutf8char to walk the byte string, so we only rely on Python for unpacking our U+DCxx characters.

bmstore: add handling of the active bookmark This further centralizes the handling of bookmark storage, and will help get some lingering bookmarks business out of localrepo. Right now, this change implies reading of the active bookmark to also imply reading all bookmarks from disk - for users with many many bookmarks this may be a measurable performance hit. In that case, we should migrate bmstore to be able to lazy-read its properties from disk rather than having to eagerly read them, but I decided to avoid doing that to try and avoid some potentially complicated filecache decorator issues. This doesn't move the logic for writing the active bookmark into a transaction, though that is probably the correct next step. Since the API probably needs to morph a little more, I didn't bother marking bookmarks.{activate,deactivate} as deprecated yet.

patchbomb: treat empty address list as no addresses Previously it wasn't possible to use configuration to avoid being prompted for e.g. a CC list when using patchbomb to send emails. We now make it possible to supply an empty value.

config: add hasconfig method and supporting plumbing We add the hasconfig method to make it possible to distinguish between a config value that was never supplied and one that is empty.

verify: replace "output parameters" by return values _verifychangelog() and _verifymanifest() accept dictionaries that they populate. We pass in empty dictionaries, so it's clearer to create them in the functions and return them.

shelve: hook afterresolvedstates

check-code: allow only-whitespace lines in tests These turn out to be necessary to embed diffs with blank lines in test input. So we now complain about whitespace following a character.

check-commit: try to curb bad commit summary keywords The goal of commit summary keywords is to help us sort, categorize, and filter our voluminous commits for our release notes in a way that's helpful and meaningful to end users. Lately, there have been a huge number of "keywords" that are neither words nor particularly key. This patch tries to discourage that by narrowing the allowed characters to alphanumeric. In particular, it doesn't allow "." (method, function names, and file extensions) and "/" (filenames). It also gives a short reminder of what a keyword ought to be.

changegroup: don't add a second trailing '/' in dir name The paths given from treemanifest.dir() already contains the trailing slash.

changegroup: remove left-over debugging help

run-tests: skip threading for a single test Threading is incompatible with most Python debuggers, which makes debugging run-tests.py a real pain. If there is only one test to run, skip using a thread for it. Note that --debug is not compatible with debugging tests, since it bypasses the output handling, which is where much of the excitement is.

sslutil: fix reversed logic (issue5034)

installer: add windows application version number to inno installer script This addition to the inno installer script means that the windows uninstaller registry key “DisplayVersion" is set to the application version number and will show in Add/Remove Programs.

run-tests: add 'diff' entry in json report This patch adds to the json report the "diff" between expected and observed result. This diff can be useful for automatically filing bug report on failing tests.

bookmarks: make _readactive safe when readlines raises ENOENT When reading over static http, the file isn't actually opened until the readlines() call, so we have to check for ENOENT IOErrors here too. This is necessary so that we can use the bmstore everywhere for managing the active bookmark, which will be true in the next change.

wix: add help for current internal topics This makes the changes in a79cba6cb206 and 84784f834b3a available on Windows. I'm not setup to make the installer, so someone with experience in this area should probably give it a look. In looking around to try to figure out how to build the installer, it looks like the Makefile may need an update to $DOCFILES.

help: fix quoting for bundle1 options

merge with stable

extdiff: use @command decorator to set up diff commands It can set "inferrepo" attribute appropriately.

extdiff: factor out list of common options

dispatch: copy inferrepo attribute to alias commands The other attributes are copied. Let's do the same for the inferrepo.

transplant: specify the right file and path for unfinishedstates

transplant: only use checkunfinished if not continue

transplant: correct language to use working directory

histedit: replace @addhisteditaction with @action @action supports verbs, messages, priority, and internal messages should be translated. internal means the action should not be listed. geteditcomment will construct the verbs list based on @actions (prefering priority over non priority, otherwise favoring verbs with short forms over verbs without).

histedit: prefer edit commit, edit message, use commit Selecting editing commits, rewording commit messages, and selecting commits are key actions, we will prefer them more generally in a future commit, this pulls them ahead before that to make the diffs easier to read. The remaining commands are left alphabetically sorted

histedit: replace editcomment with a function

debugignore: find out why a file is being ignored (issue4856) This patch adds a capability to hg debugignore: to explain why a given file is being ignores by mercurial. We display the filename, line and linenumber of the rule that lead us to ignore the file.

debugignore: find out if a file is being ignored Before this patch debugignore was just displaying the list of ignore patterns. This patch makes it support a list of filename as argument and tells the user if those given files are ignored or not.

dirstate: add a way to get the ignore file/line matching an ignored file This information will be used to improve debugignore (issue4856).

clone: move bookmarks and checkouts before pull help The bookmark/checkout help actually split the pull help. The subsequent verbose container is talking about pull too. This change puts the pull help back together again.

status: revert + flag-change == modified After just changing the flag on a file, plain 'hg status' will report the file as modified. However, after reverting a file to a previous revision's state and changing the flag, it will be reported as clean. Fix by comparing the flags that were previously ignored in context._buildstatus().

util: remove outdated comment about construction overhead An old implementation of this class (possibly only in my local repo) allocated nodes in the cache during construction time, making __init__ slow for large cache capacities. The current implementation lazily grow the cache size, making this comment wrong.

test-transplant.t: improve test coverage * ?, x, q * not a parent * --source * outstanding local changes * outstanding uncommitted merges * no revision checked out * checkopts all+branch+rev * checkopts all-branch * checkopts no-args * checkopts continue+all * revset:transplanted(...) * filter corrupted changeset

help: use backticks for progress.format keywords, correct letter case

log: help provide sort by date example

log: mention ordering a user complained that hg help log did not hint how to sort the output by date

transaction: remove 'if True:' This seems to be left over from 96dd93de548c (transaction: reorder unlinking .hg/journal and .hg/journal.backupfiles, 2015-10-16).

lazymanifest: check more return values in filtercopy Spotted by Bryan O'Sullivan (and vexingly not the static analyzer I've been using.)

mercurial: pass ui to extensions.load (issue5007) extensions.load does need ui argument to print error if an extension fails to load.

test-patchbomb.t: drop a number of now-redundant uses of "-n"

test-patchbomb.t: test use of sendmail program

merge: add options to warn or ignore on colliding unknown files A 'colliding unknown file' is a file that meets all of the following conditions: - is untracked or ignored on disk - is present in the changeset being merged or updated to - has different contents Previously, we would always abort whenever we saw such files. With this config option we can choose to warn and back the unknown files up instead, or even forgo the warning entirely and silently back the unknown files up. Common use cases for this configuration include a large scale transition of formerly ignored unknown files to tracked files. In some cases the files can be given new names, but in other cases, external "convention over configuration" constraints have determined that the file must retain the same name as before.

batchget: add support for backing up files We're going to use this in an upcoming feature.

merge: add a new 'backup' argument to get actions We're going to use this in an upcoming patch to back untracked files up when they're replaced by tracked ones.

_checkunknownfiles: turn 'conflicts' into a set We'll check for membership in this set in an upcoming patch.

checkunknownfiles: make control flow clearer In particular, make it clear that we only check for and abort on conflicts if force is not true.

_checkunknownfiles: rename 'aborts' to 'conflicts' In upcoming patches we'll be able to do more useful things than aborting.

origpath: move from cmdutil to scmutil This is a lower-level function so it doesn't need to be in cmdutil, and putting it here avoids a bunch of potential import cycle issues.

revlog: remove unnecessary cache validation in _chunks Previously, we likely called _chunkraw() multiple times in order to ensure it didn't change out from under us. I'm pretty certain this code had its origins in the days where we attempted to have thread safety of localrepository and thus revlog instances. revlog instances are already not thread safe for writing. And, as of Mercurial 3.6, hgweb uses a separate localrepository instance per request, so there should only be a single thread reading a revlog at a time. We more or less decided that attempting to make classes like revlog thread safe is a lost cause. So, this patch removes thread safety from _chunks. As a result, we make one less call into _chunkraw() when the initial read isn't serviced by the cache. This translates to savings of 4 function calls overall and possibly prevents the creation of an additional buffer view into the cache. I doubt this translates into any real world performance wins because decompression will almost certainly dwarf time spent in _chunks(). But it does make the code simpler, so it is an improvement.

revlog: return offset from _chunkraw() A subsequent patch will refactor _chunks() and the calculation of the offset will no longer occur in that function. Prepare by returning the offset from _chunkraw().

verify: get rid of some unnecessary local variables Now that all the major functionality has been refactored out, we can delete some unused local variables.

verify: move changelog verificaiton to its own function This makes verify more modular so extensions can hook into it.

verify: move manifest verification to its own function This makes verify more modular, making it easier for extensions to extend.

verify: move file cross checking to its own function This is part of making verify more modular so extensions can hook into it.

verify: move filelog verification to its own function This makes verify more modular so extensions can hook in more easily.

verify: move checkentry() to be a class function This is part of making verify more modular so extensions can hook into it.

verify: move checklog() onto class This is part of an effort to make verify more modular so extensions can hook into it.

dockerrpm: fix CentOS 5 RPMs (issue4977) The older rpmbuild in CentOS 5 fails if some of the output directories have not been created yet. This change results in creating those directories.