repair: copy non-revlog store files during upgrade The store contains more than just revlogs. This patch teaches the upgrade code to copy regular files as well. As the test changes demonstrate, the phaseroots file is now copied.

repair: migrate revlogs during upgrade Our next step for in-place upgrade is to migrate store data. Revlogs are the biggest source of data within the store and a store is useless without them, so we implement their migration first. Our strategy for migrating revlogs is to walk the store and call `revlog.clone()` on each revlog. There are some minor complications. Because revlogs have different storage options (e.g. changelog has generaldelta and delta chains disabled), we need to obtain the correct class of revlog so inserted data is encoded properly for its type. Various attempts at implementing progress indicators that didn't lead to frustration from false "it's almost done" indicators were made. I initially used a single progress bar based on number of revlogs. However, this quickly churned through all filelogs, got to 99% then effectively froze at 99.99% when it got to the manifest. So I converted the progress bar to total revision count. This was a little bit better. But the manifest was still significantly slower than filelogs and it took forever to process the last few percent. I then tried both revision/chunk bytes and raw bytes as the denominator. This had the opposite effect: because so much data is in manifests, it would churn through filelogs without showing much progress. When it got to manifests, it would fill in 90+% of the progress bar. I finally gave up having a unified progress bar and instead implemented 3 progress bars: 1 for filelog revisions, 1 for manifest revisions, and 1 for changelog revisions. I added extra messages indicating the total number of revisions of each so users know there are more progress bars coming. I also added extra messages before and after each stage to give extra details about what is happening. Strictly speaking, this isn't necessary. But the numbers are impressive. For example, when converting a non-generaldelta mozilla-central repository, the messages you see are: migrating 2475593 total revisions (1833043 in filelogs, 321156 in manifests, 321394 in changelog) migrating 1.67 GB in store; 2508 GB tracked data migrating 267868 filelogs containing 1833043 revisions (1.09 GB in store; 57.3 GB tracked data) finished migrating 1833043 filelog revisions across 267868 filelogs; change in size: -415776 bytes migrating 1 manifests containing 321156 revisions (518 MB in store; 2451 GB tracked data) That "2508 GB" figure really blew me away. I had no clue that the raw tracked data in mozilla-central was that large. Granted, 2451 GB is in the manifest and "only" 57.3 GB is in filelogs. But still. It's worth noting that gratuitous loading of source revlogs in order to display numbers and progress bars does serve a purpose: it ensures we can open all source revlogs. We don't want to spend several minutes copying revlogs only to encounter a permissions error or similar later. As part of this commit, we also add swapping of the store directory to the upgrade function. After revlogs are converted, we move the old store into the backup directory then move the temporary repo's store into the old store's location. On well-behaved systems, this should be 2 atomic operations and the window of inconsistency show be very narrow. There are still a few improvements to be made to store copying and upgrading. But this commit gets the bulk of the work out of the way.

revlog: add clone method Upcoming patches will introduce functionality for in-place repository/store "upgrades." Copying the contents of a revlog feels sufficiently low-level to warrant being in the revlog class. So this commit implements that functionality. Because full delta recomputation can be *very* expensive (we're talking several hours on the Firefox repository), we support multiple modes of execution with regards to delta (re)use. This will allow repository upgrades to choose the "level" of processing/optimization they wish to perform when converting revlogs. It's not obvious from this commit, but "addrevisioncb" will be used for progress reporting.

repair: begin implementation of in-place upgrading Now that all the upgrade planning work is in place, we can start doing the real work: actually upgrading a repository. The main goal of this commit is to get the "framework" for running in-place upgrade actions in place. Rather than get too clever and low-level with regards to in-place upgrades, our strategy is to create a new, temporary repository, copy data to it, then replace the old data with the new. This allows us to reuse a lot of code in localrepo.py around store interaction, which will eventually consume the bulk of the upgrade code. But we have to start small. This patch implements adding new repository requirements. But it still sets up a temporary repository and locks it and the source repo before performing the requirements file swap. This means all the plumbing is in place to implement store copying in subsequent commits.

repair: determine what upgrade will do This commit introduces code for determining what actions/improvements an upgrade should perform. The "upgradefindimprovements" function introduces a mechanism to return a list of improvements that can be made to a repository. Each improvement is effectively an action that an upgrade will perform. Associated with each of these improvements is metadata that will be used to inform users what's wrong and what an upgrade will do. Each "improvement" is categorized as a "deficiency" or an "optimization." TBH, I'm not thrilled about the terminology and am receptive to constructive bikeshedding. The main difference between a "deficiency" and an "optimization" is a deficiency is always corrected (if it deviates from the current config) and an "optimization" is an optional action that goes above and beyond to improve the state of the repository (usually by requiring more CPU during upgrade). Our initial set of improvements identifies missing repository requirements, a single, easily correctable problem with changelog storage, and a set of "optimizations" related to delta recalculation. The main "upgraderepo" function has been expanded to handle improvements. It queries for the list of improvements and determines which of them will run based on the current repository state and user I went through numerous iterations of the output format before settling on a ReST-inspired definition list format. (I used bulleted lists in the first submission of this commit and could not get it to format just right.) Even with the various iterations, I'm still not super thrilled with the format. But, this is a debug* command, so that should mean we can refine the output without BC concerns.

repair: implement requirements checking for upgrades This commit introduces functionality for upgrading a repository in place. The first part that's implemented is testing for upgrade "compatibility." This is done by examining repository requirements. There are 5 functions returning sets of requirements that control upgrading. Why so many functions? Mainly to support extensions. Functions are easier to monkeypatch than module variables. Astute readers will see that we don't support "manifestv2" and "treemanifest" requirements in the upgrade mechanism. I don't have a great answer for why other than this is a complex set of patches and I don't want to deal with the complexity of these experimental features just yet. We can teach the upgrade mechanism about them later, once the basic upgrade mechanism is in place. This commit also introduces the "upgraderepo" function. This will be our main routine for performing an in-place upgrade. Currently, it just implements requirements checking. The structure of some code in this function may look a bit weird (e.g. the inline function that is only called once). But this will make sense after future commits.

debugcommands: stub for debugupgraderepo command Currently, if Mercurial introduces a new repository/store feature or changes behavior of an existing feature, users must perform an `hg clone` to create a new repository with hopefully the correct/optimal settings. Unfortunately, even `hg clone` may not give the correct results. For example, if you do a local `hg clone`, you may get hardlinks to revlog files that inherit the old state. If you `hg clone` from a remote or `hg clone --pull`, changegroup application may bypass some optimization, such as converting to generaldelta. Optimizing a repository is harder than it seems and requires more than a simple `hg` command invocation. This commit starts the process of changing that. We introduce `hg debugupgraderepo`, a command that performs an in-place upgrade of a repository to use new, optimal features. The command is just a stub right now. Features will be added in subsequent commits. This commit does foreshadow some of the behavior of the new command, notably that it doesn't do anything by default and that it takes arguments that influence what actions it performs. These will be explained more in subsequent commits.

util: teach stringmatcher to handle forced case insensitive matches The 'author' and 'desc' revsets are documented to be case insensitive. Unfortunately, this was implemented in 'author' by forcing the input to lowercase, including for regex like '\B'. (This actually inverts the meaning of the sequence.) For backward compatibility, we will keep that a case insensitive regex, but by using matcher options instead of brute force. This doesn't preclude future hypothetical 'icase-literal:' style prefixes that can be provided by the user. Such user specified cases can probably be handled up front by stripping 'icase-', setting the variable, and letting it drop through the existing code.

revset: point to 'grep' in the 'keyword' help for regex searches The help for 'grep' already points to 'keyword'.

help: explain that revsets can be used where 1 or 2 revs are wanted We did not seem to document that one can do things like "hg up :@" where the last revision of the revset ":@".

help: explain what the term "revset" means We refer to revsets in a few places (e.g. in "hg help config"), but we never explained what they are. Until now.

help: merge revsets.txt into revisions.txt Selecting single and multiple revisions is closely related, so let's put it in one place, so users can easily find it. We actually did not even point to "hg help revsets" from "hg help revisions", but now that they're on a single page, that won't be necessary.

tests: use `hg help dates` instead of `hg help revs` in test The revisions help is already long and will get longer, so switch to another short and stable topic.

help: use a single paragraph to describe full and abbreviated nodeids The texts describing 40-digit strings and the abbreviated form are closely related, so make it a single paragraph.

hgweb: support Content Security Policy Content-Security-Policy (CSP) is a web security feature that allows servers to declare what loaded content is allowed to do. For example, a policy can prevent loading of images, JavaScript, CSS, etc unless the source of that content is whitelisted (by hostname, URI scheme, hashes of content, etc). It's a nifty security feature that provides extra mitigation against some attacks, notably XSS. Mitigation against these attacks is important for Mercurial because hgweb renders repository data, which is commonly untrusted. While we make attempts to escape things, etc, there's the possibility that malicious data could be injected into the site content. If this happens today, the full power of the web browser is available to that malicious content. A restrictive CSP policy (defined by the server operator and sent in an HTTP header which is outside the control of malicious content), could restrict browser capabilities and mitigate security problems posed by malicious data. CSP works by emitting an HTTP header declaring the policy that browsers should apply. Ideally, this header would be emitted by a layer above Mercurial (likely the HTTP server doing the WSGI "proxying"). This works for some CSP policies, but not all. For example, policies to allow inline JavaScript may require setting a "nonce" attribute on <script>. This attribute value must be unique and non-guessable. And, the value must be present in the HTTP header and the HTML body. This means that coordinating the value between Mercurial and another HTTP server could be difficult: it is much easier to generate and emit the nonce in a central location. This commit introduces support for emitting a Content-Security-Policy header from hgweb. A config option defines the header value. If present, the header is emitted. A special "%nonce%" syntax in the value triggers generation of a nonce and inclusion in <script> elements in templates. The inclusion of a nonce does not occur unless "%nonce%" is present. This makes this commit completely backwards compatible and the feature opt-in. The nonce is a type 4 UUID, which is the flavor that is randomly generated. It has 122 random bits, which should be plenty to satisfy the guarantees of a nonce.

hgweb: call process_dates() via DOM event listener All the hgweb templates include mercurial.js in their header. All the hgweb templates have the same <script> boilerplate to run process_dates(). This patch factors that function call into mercurial.js as part of a DOMContentLoaded event listener.

protocol: send application/mercurial-0.2 responses to capable clients With this commit, the HTTP transport now parses the X-HgProto-<N> header to determine what media type and compression engine to use for responses. So far, we only compress responses that are already being compressed with zlib today (stream response types to specific commands). We can expand things to cover additional response types later. The practical side-effect of this commit is that non-zlib compression engines will be used if both ends support them. This means if both ends have zstd support, zstd - not zlib - will be used to compress data! When cloning the mozilla-unified repository between a local HTTP server and client, the benefits of non-zlib compression are quite noticeable: engine server CPU (s) client CPU (s) bundle size zlib (l=6) 174.1 283.2 1,148,547,026 zstd (l=1) 99.2 267.3 1,127,513,841 zstd (l=3) 103.1 266.9 1,018,861,363 zstd (l=7) 128.3 269.7 919,190,278 zstd (l=10) 162.0 - 894,547,179 none 95.3 277.2 4,097,566,064 The default zstd compression level is 3. So if you deploy zstd capable Mercurial to your clients and servers and CPU time on your server is dominated by "getbundle" requests (clients cloning and pulling) - and my experience at Mozilla tells me this is often the case - this commit could drastically reduce your server-side CPU usage *and* save on bandwidth costs! Another benefit of this change is that server operators can install *any* compression engine. While it isn't enabled by default, the "none" compression engine can now be used to disable wire protocol compression completely. Previously, commands like "getbundle" always zlib compressed output, adding considerable overhead to generating responses. If you are on a high speed network and your server is under high load, it might be advantageous to trade bandwidth for CPU. Although, zstd at level 1 doesn't use that much CPU, so I'm not convinced that disabling compression wholesale is worthwhile. And, my data seems to indicate a slow down on the client without compression. I suspect this is due to a lack of buffering resulting in an increase in socket read() calls and/or the fact we're transferring an extra 3 GB of data (parsing HTTP chunked transfer and processing extra TCP packets can add up). This is definitely worth investigating and optimizing. But since the "none" compressor isn't enabled by default, I'm inclined to punt on this issue. This commit introduces tons of tests. Some of these should arguably have been implemented on previous commits. But it was difficult to test without the server functionality in place.

httppeer: advertise and support application/mercurial-0.2 Now that servers expose a capability indicating they support application/mercurial-0.2 and compression, clients can key off this to say they support responses that are compressed with various compression formats. After this commit, the HTTP wire protocol client now sends an "X-HgProto-<N>" request header indicating its support for "application/mercurial-0.2" media type and various compression formats. This commit also implements support for handling "application/mercurial-0.2" responses. It simply reads the header compression engine identifier then routes the remainder of the response to the appropriate decompressor. There were some test changes, but only to logging. That points to an obvious gap in our test coverage. This will be addressed in a subsequent commit once server support is in place (it is hard to test without server support).

wireproto: advertise supported media types and compression formats This commit introduces support for advertising a server's support for media types and compression formats in accordance with the spec defined in internals.wireproto. The bulk of the new code is a helper function in wireproto.py to obtain a prioritized list of compression engines available to the wire protocol. While not utilized yet, we implement support for obtaining the list of compression engines advertised by the client. The upcoming HTTP protocol enhancements are a bit lower-level than existing tests (most existing tests are command centric). So, this commit establishes a new test file that will be appropriate for holding tests around the functionality of the HTTP protocol itself. Rounding out this change, `hg debuginstall` now prints compression engines available to the server.

util: declare wire protocol support of compression engines This patch implements a new compression engine API allowing compression engines to declare support for the wire protocol. Support is declared by returning a compression format string identifier that will be added to payloads to signal the compression type of data that follows and default integer priorities of the engine. Accessor methods have been added to the compression engine manager class to facilitate use. Note that the "none" and "bz2" engines declare wire protocol support but aren't enabled by default due to their priorities being 0. It is essentially free from a coding perspective to support these compression formats, so we do it in case anyone may derive use from it.

internals: document compression negotiation As part of adding zstd support to all of the things, we'll need to teach the wire protocol to support non-zlib compression formats. This commit documents how we'll implement that. To understand how we arrived at this proposal, let's look at how things are done today. The wire protocol today doesn't have a unified format. Instead, there is a limited facility for differentiating replies as successful or not. And, each command essentially defines its own response format. A significant deficiency in the current protocol is the lack of payload framing over the SSH transport. In the HTTP transport, chunked transfer is used and the end of an HTTP response body (and the end of a Mercurial command response) can be identified by a 0 length chunk. This is how HTTP chunked transfer works. But in the SSH transport, there is no such framing, at least for certain responses (notably the response to "getbundle" requests). Clients can't simply read until end of stream because the socket is persistent and reused for multiple requests. Clients need to know when they've encountered the end of a request but there is nothing simple for them to key off of to detect this. So what happens is the client must decode the payload (as opposed to being dumb and forwarding frames/packets). This means the payload itself needs to support identifying end of stream. In some cases (bundle2), it also means the payload can encode "error" or "interrupt" events telling the client to e.g. abort processing. The lack of framing on the SSH transport and the transfer of its responsibilities to e.g. bundle2 is a massive layering violation and a wart on the protocol architecture. It needs to be fixed someday by inventing a proper framing protocol. So about compression. The client transport abstractions have a "_callcompressable()" API. This API is called to invoke a remote command that will send a compressible response. The response is essentially a "streaming" response (no framing data at the Mercurial layer) that is fed into a decompressor. On the HTTP transport, the decompressor is zlib and only zlib. There is currently no mechanism for the client to specify an alternate compression format. And, clients don't advertise what compression formats they support or ask the server to send a specific compression format. Instead, it is assumed that non-error responses to "compressible" commands are zlib compressed. On the SSH transport, there is no compression at the Mercurial protocol layer. Instead, compression must be handled by SSH itself (e.g. `ssh -C`) or within the payload data (e.g. bundle compression). For the HTTP transport, adding new compression formats is pretty straightforward. Once you know what decompressor to use, you can stream data into the decompressor until you reach a 0 size HTTP chunk, at which point you are at end of stream. So our wire protocol changes for the HTTP transport are pretty straightforward: the client and server advertise what compression formats they support and an appropriate compression format is chosen. We introduce a new HTTP media type to hold compressed payloads. The header of the payload defines the compression format being used. Whoever is on the receiving end can sniff the first few bytes route to an appropriate decompressor. Support for multiple compression formats is advertised on both server and client. The server advertises a "compression" capability saying which compression formats it supports and in what order they are preferred. Clients advertise their support for multiple compression formats and media types via the introduced "X-HgProto" request header. Strictly speaking, servers don't need to advertise which compression formats they support. But doing so allows clients to fail fast if they don't support any of the formats the server does. This is useful in situations like sending bundles, where the client may have to perform expensive computation before sending data to the server. Rather than simply advertise a list of supported compression formats, we introduce an additional "httpmediatype" server capability advertising which media types the server supports. This means servers are explicit about what formats they exchange. IMO, this is superior to inferring support from other capabilities (like "compression"). By advertising compression support on each request in the "X-HgProto" header and media type and direction at the server level, we are able to gradually transition existing commands/responses to the new media type and possibly compression. Contrast with the old world, where we only supported a single media type and the use of compression was built-in to the semantics of the command on both client and server. In the new world, if "application/mercurial-0.2" is supported, compression is supported. It's that simple. It's worth noting that we explicitly don't use "Accept," "Accept-Encoding," "Content-Encoding," or "Transfer-Encoding" for content negotiation and compression. People knowledgeable of the HTTP specifications will say that we should use these because that's what they are designed to be used for. They have a point and I sympathize with the argument. Earlier versions of this commit even defined supported media types in the "Accept" header. However, my years of experience rolling out services leveraging HTTP has taught me to not trust the HTTP layer, especially if you are going outside the normal spec (such as using a custom "Content-Encoding" value to represent zstd streams). I've seen load balancers, proxies, and other network devices do very bad and unexpected things to HTTP messages (like insisting zlib compressed content is decoded and then re-encoded at a different compression level or even stripping compression completely). I've found that the best way to avoid surprises when writing protocols on top of HTTP is to use HTTP as a dumb transport as much as possible to minimize the chances that an "intelligent" agent between endpoints will muck with your data. While the widespread use of TLS is mitigating many intermediate network agents interfering with HTTP, there are still problems at the edges, with e.g. the origin HTTP server needing to convert HTTP to and from WSGI and buggy or feature-lacking HTTP client implementations. I've found the best way to avoid these problems is to avoid using headers like "Content-Encoding" and to bake as much logic as possible into media types and HTTP message bodies. The protocol changes in this commit do rely on a custom HTTP request header and the "Content-Type" headers. But we used them before, so we shouldn't be increasing our exposure to "bad" HTTP agents. For the SSH transport, we can't easily implement content negotiation to determine compression formats because the SSH transport has no content negotiation capabilities today. And without a framing protocol, we don't know how much data to feed into a decompressor. So in order to implement compression support on the SSH transport, we'd need to invent a mechanism to represent content types and an outer framing protocol to stream data robustly. While I'm fully capable of doing that, it is a lot of work and not something that should be undertaken lightly. My opinion is that if we're going to change the SSH transport protocol, we should take a long hard look at implementing a grand unified protocol that attempts to address all the deficiencies with the existing protocol. While I want this to happen, that would be massive scope bloat standing in the way of zstd support. So, I've decided to take the easy solution: the SSH transport will not gain support for multiple compression formats. Keep in mind it doesn't support *any* compression today. So essentially nothing is changing on the SSH front.

httppeer: extract code for HTTP header spanning A second consumer of HTTP header spanning will soon be introduced. Factor out the code to do this so it can be reused.

commands: config option to control bundle compression level Currently, bundle compression uses the default compression level for the active compression engine. The default compression level is tuned as a compromise between speed and size. Some scenarios may call for a different compression level. For example, with clone bundles, bundles are generated once and used several times. Since the cost to generate is paid infrequently, server operators may wish to trade extra CPU time for better compression ratios. This patch introduces an experimental and undocumented config option to control the bundle compression level. As the inline comment says, this approach is a bit hacky. I'd prefer for the compression level to be encoded in the bundle spec. e.g. "zstd-v2;complevel=15." However, given that the 4.1 freeze is imminent, I'm not comfortable implementing this user-facing change without much time to test and consider the implications. So, we're going with the quick and dirty solution for now. Having this option in the 4.1 release will enable Mozilla to easily produce and test zlib and zstd bundles with non-default compression levels in production. This will help drive future development of the feature and zstd integration with Mercurial.

bundle2: allow compression options to be passed to compressor Compression engines allow options to be passed to them to control behavior. This patch exposes an argument to bundle2.writebundle() that passes options to the compression engine when writing compressed bundles. The argument is honored for both bundle1 and bundle2, the latter requiring a bit of plumbing to pass the value around.

chg: check snprintf result strictly This makes the program more robust when somebody changes hgclient's maxdatasize in the future.

rebase: provide detailed hint to abort message if working dir is not clean Detailed hint message is now provided when 'pull --rebase' operation detects unclean working dir, for example: abort: uncommitted changes (cannot pull with rebase: please commit or shelve your changes first) Added tests for uncommitted merge, and for subrepo support verifying that same hint is also passed to subrepo state check.

revset: parse variable-length arguments of followlines() by getargsdict()

parser: extend buildargsdict() to support variable-length positional args This can simplify the argument parsing of followlines(). Tests are added by the next patch.

parser: make buildargsdict() precompute position where keyword args start This prepares for adding *varargs support. See the next patch.

chg: change server's process title This patch uses the newly introduced "setprocname" interface to update the process title server-side, to make it easier to tell what a worker is actually doing. The new title is "chg[worker/$PID]", where PID is the process ID of the connected client. It can be directly observed using "ps -AF" under Linux, or "ps -A" under FreeBSD.

chgserver: add the setprocname interface This allows clients to change its process title freely.

hgweb: use archivespecs for links on repo index page too Moving archivespecs to the module level allows using it from other modules (such as hgwebdir_mod), and keeping a reference to it in requestcontext allows current code to just work.

hgweb: use util.sortdict for archivespecs Thus we allow dict-like indexing and "in" checks, and also preserve the order of archive types and can generate links in a certain order (so requestcontext.archives is no longer needed).

hgweb: test the order of archive links

revlog: REVIDX_EXTSTORED flag This flag will be used by the lfs extension to mark the revision data as stored externally.

revlog: flag processor Add the ability for revlog objects to process revision flags and apply registered transforms on read/write operations. This patch introduces: - the 'revlog._processflags()' method that looks at revision flags and applies flag processors registered on them. Due to the need to handle non-commutative operations, flag transforms are applied in stable order but the order in which the transforms are applied is reversed between read and write operations. - the 'addflagprocessor()' method allowing to register processors on flags. Flag processors are defined as a 3-tuple of (read, write, raw) functions to be applied depending on the operation being performed. - an update on 'revlog.addrevision()' behavior. The current flagprocessor design relies on extensions to wrap around 'addrevision()' to set flags on revision data, and on the flagprocessor to perform the actual transformation of its contents. In the lfs case, this means we need to process flags before we meet the 2GB size check, leading to performing some operations before it happens: - if flags are set on the revision data, we assume some extensions might be modifying the contents using the flag processor next, and we compute the node for the original revision data (still allowing extension to override the node by wrapping around 'addrevision()'). - we then invoke the flag processor to apply registered transforms (in lfs's case, drastically reducing the size of large blobs). - finally, we proceed with the 2GB size check. Note: In the case a cachedelta is passed to 'addrevision()' and we detect the flag processor modified the revision data, we chose to trust the flag processor and drop the cachedelta.

revlog: pass revlog flags to addrevision Adding the ability to passing flags to addrevision instead of simply passing default flags to _addrevision will allow extensions relying on flag transforms to wrap around addrevision() in order to update revlog flags. The first use case of this patch will be the lfs extension marking nodes as stored externally when the contents are larger than the defined threshold. One of the reasons leading to setting flags in addrevision() wrappers in the flag processor design is that it allows to detect files larger than the 2GB limit before the check is performed, which allows lfs to transform the contents into metadata.

revlog: add 'raw' argument to revision and _addrevision This patch introduces a new 'raw' argument (defaults to False) to revlog's revision() and _addrevision() methods. When the 'raw' argument is set to True, it indicates the revision data should be handled as raw data by the flagprocessor. Note: Given revlog.addgroup() calls are restricted to changegroup generation, we can always set raw to True when calling revlog._addrevision() from revlog.addgroup().

pager: do not special case chg Since chg has its own _runpager implementation, it's no longer necessary to special-case chg in the pager extension. This will effectively enable the new chg pager code path that runs inside runcommand.

chg: remove getpager support We have enough bits to switch to the new chg pager code path in runcommand. So just remove the legacy getpager support. This is a red-only patch, and will break chg's pager support temporarily.

chgserver: implement chgui._runpager This patch implements chgui._runpager in a relatively simple way. A more clean way is to move the core logic of "attachio" to "ui", which will be done later after chg runs uisetup per request.

chgserver: make S channel support pager request This patch adds the "pager" support for the S channel. The pager API allows running some subcommands, namely attachio, and waiting for the client to be properly synchronized.

chg: handle pager request client-side This patch implements the simple S-channel pager handling at chg client-side. Note: It does not deal with environ and cwd currently for simplicity, which will be fixed later.

chgserver: use util.shellenviron This avoids code duplication.

util: extract the logic calculating environment variables The method will be reused in chgserver. Move it out so it can be reused.

hgweb: generate archive links in order It would be nice for archive links to always be in a certain commonly used order, such as 'zip', 'bz', 'gzip2'. Repo index page (hgwebdir_mod) already shows archive links in this order, let's do the same in hgweb_mod. Sadly, archivespecs is a regular unordered dict, and collections.OrderedDict is new in 2.7. But requestcontext.archives is a tuple of archive types, so it can be used as an index to archivespecs.

hgweb: use archivespecs (dict) instead of archives (tuple) for "in" check

test-obsolete: stabilize output on platforms without 'serve' support The conditional was updating the repository, which wasn't reflected in subsequent logs on Windows, so the conditional is narrowed to just the serve commands. The serve operation generates log files, so those are deleted to keep the output of summary consistent.

tests: update globs for Windows The extra glob in test-command-template.t caused it to say no result was reported. It used to be (within the past year), that both this and the missing glob cases could be fixed simply by editing any output in the test, and re-running it in interactive mode. But that no longer works, and I had to diff *.t against *.t.err. I didn't dig into what changed.

help: merge the various operator sections of revsets, filesets and templates Having sections for specific operator types assumes the user already knows what type of operators are supported. By having a common heading, the user can simply lookup help for "(revsets|filesets|templates).operators".

help: apply the section headings from revsets to templates Unlike filesets, there are a few distinct headings that are not shared with revsets. But common names are used where possible.

help: apply the section headings from revsets to filesets This has the nice property of visually breaking up the wall of text. It also allows specific smaller sections to be called out. For example, `hg help filesets.predicates` now prints just the predicate section. At the moment, the revset headings are a superset of the fileset headings, so there is consistency in how example, predicate and operator help is called out. The reference to `hg help patterns` was moved to the overview section, so that it isn't stuck in the examples section.

chg: check type read from S channel The previous patch added the check server-side. This patch added it client-side.

chgserver: check type passed to S channel It currently only supports the "system" type. Add an explicit check.

chg: send type information via S channel (BC) Previously S channel is only used to send system commands. It will also be used to send pager commands. So add a type parameter. This breaks older chg clients. But chg and hg should always come from a single commit and be packed into a single package. Supporting running inconsistent versions of chg and hg seems to be unnecessarily complicated with little benefit. So just make the change and assume people won't use inconsistent chg with hg.

rebase: fail-fast the pull if working dir is not clean (BC) Refuse to run 'hg pull --rebase' if there are uncommitted changes: so that instead of going ahead with fetching changes and then suddenly aborting the rebase, we can warn user of uncommitted changes (or unclean repo state) right up front. In tests, we create a 'histedit' session to verify that also an unfinished state is detected and handled.

commit: fix unmodified message detection for the "--- >8 ----" magic We need the raw editortext to be compared with the templatetext.

commit: update test to actually modify template text We have a check for unmodified commit message (introduced by bec1a579ebc4), which should be enabled for the "--- >8 ---" magic but currently not.

pager: wrap ui._runpager As discussed at [1], ui._runpager will be the new low-level API accepting a pager command to actually run the pager. And ui.pager is the high-level API which reads config directly from self. This change is necessary for chgserver to override _runpager cleanly. [1]: www.mercurial-scm.org/pipermail/mercurial-devel/2016-December/091656.html

summary: use ui.label and join to write evolution troubles Follow-up on 7b526670f540 to avoid a convoluted loop.

log: drop unnecessary ui.note label from "trouble: " line Follow-up on f05ede08dcf7 and 6d0b1a69f98c.

revset: add a followlines(file, fromline, toline[, rev]) revset This revset returns the history of a range of lines (fromline, toline) of a file starting from `rev` or the current working directory. Added tests in test-annotate.t which already contains a reasonably complex repository.

context: add a `blockancestors(fctx, fromline, toline)` function This yields ancestors of `fctx` by only keeping changesets touching the file within specified linerange = (fromline, toline). Matching revisions are found by inspecting the result of `mdiff.allblocks()`, filtered by `mdiff.blocksinrange()`, to find out if there are blocks of type "!" within specified line range. If, at some iteration, an ancestor with an empty line range is encountered, the algorithm stops as it means that the considered block of lines actually has been introduced in the revision of this iteration. Otherwise, we finally yield the initial revision of the file as the block originates from it. When a merge changeset is encountered during ancestors lookup, we consider there's a diff in the current line range as long as there is a diff between the merge changeset and at least one of its parents (in the current line range).

mdiff: add a "blocksinrange" function to filter diff blocks by line range The function filters diff blocks as generated by mdiff.allblock function based on whether they are contained in a given line range based on the "b-side" of blocks.

run-tests: unset CHGDEBUG With CHGDEBUG, chg outputs much more stuff and the test could fail running with --chg. So unset the environment variable.

summary: add evolution "troubles" information to summary output Extend the "parent: " lines in summary with the list of evolution "troubles" in parentheses, when the parent is troubled.

summary: use the same labels as log command in "parent: " line Re-use the cmdutil._changesetlabels function introduced in 5289fd78017a to have consistent labels between the "changeset: " line in log command and the "parent: " line in summary.

templates: display evolution "troubles" in command line style

templatekw: add a "troubles" template keyword The "troubles" template keyword returns a list of evolution troubles. It is EXPERIMENTAL, as anything else related to changeset evolution. Test it in test-obsolete.t which has troubled changesets.

test: test "trouble: " line in log output with multiple troubles Follow-up on f05ede08dcf7.

cmdutil: add missing "i18n" comment about "trouble: " line Follow-up on f05ede08dcf7 per late review.

rebase: use repo.vfs.exists in 'hg summary' hook

hgweb: link to raw-file on annotation page (BC) Every other template has the "raw" link load "raw-file." However, fileannotate.tmpl's "raw" link loads "raw-annotate." This feels inconsistent and wrong. As far as I can tell, linking to the "raw annotate" view has occurred since 2006.

repair: combine two loops over changelog revisions This just saves a few lines.

repair: speed up stripping of many roots repair.strip() expects a set of root revisions to strip. It then builds the full set of descedants by walking the descandants of each. It is rare that more than a few roots get passed in, but if that happens, it will wastefully walk the changelog for each root. So let's just walk it once. I noticed this because the narrowhg extension was passing not only roots, but all the commits to strip. When there were tens of thousands of commits to strip, this resulted in quadratic behavior with that extension.

make: remove targets for building packages for ubuntu wily (end of life) Ubuntu 15.10 (Wily Werewolf) came out on October 22, 2015 and reached end of life on July 28, 2016 [1]. Users were encouraged to upgrade to 16.04 (Xenial). PPA doesn't allow new uploads targeting 15.10 anymore. [1]: https://wiki.ubuntu.com/Releases

config: add docs for ignoring all text below in the editor This is an example of how to use the new skip-from-there string for ignoring the diff in a commit message.

cmdutil: add special string that ignores rest of text Similar to git, we add a special string: HG: ------------------------ >8 ------------------------ that means anything below it is ignored in a commit message. This is helpful for integrating with third-party tools that display the

revset: drop TODO comment about sorting issue of fullreposet The bootstrapping issue was addressed at the parsing phase and we expect that fullreposet.__and__() fully complies to the smartset API, in which 'self & other' should return a result set in self's order. See also 90455e7bf543.

revset: document wdir() as an experimental function Let's resurrect the docstring since our help module can detect the EXPERIMENTAL tag and display it only if -v is specified. This patch updates the test added by 015c0d1087a3 since wdir() is now documented.

revset: categorize wdir() as very fast function The cost of wdir() should be identical to or cheaper than _intlist().

revset: make children() not look at p2 if null (issue5439) Unlike p1 = null, p2 = null denotes the revision has only one parent, which shouldn't be considered a child of the null revision. This was spotted while fixing the issue4682 and rediscovered as issue5439.

setup: pass named argument to setup_zstd The next release from upstream adds another named argument to this function. Specify arguments by name so there is no ambiguity about which argument is being passed.

merge with stable

templates-default: factor out definition of changeset labels This is redundant for normal and debug mode and prepares extension of this list that should effect both modes.

cmdutil: add support for evolution "troubles" display in changeset_printer Add a "trouble" line in changeset header along with a couple of labels on "log.changeset" line to indicate whether a changeset is troubled or not and which kind trouble occurs.

cmdutil: extract a _changesetlabels function out of changeset_printer._show() There is a common logic in changeset_printer and in the summary command for labelling a changeset. This prepares extension of changeset's labels with evolution "troubles" information that would show up in both log and summary outputs. Ultimately, both would use this function.

chg: add procutil.h This patch adds a formal header procutil.h for procutil.c, and changes Makefile to build procutil.c independently.

chg: let procutil maintain its own pagerpid Previously, chg.c maintains the pagerpid. Let's move it to procutil.c. Note: chg.c still have a pagerpid to decide whether to call attachio or not. In the future, attachio may be moved from hgc_open to hgc_runcommand, and hgc_runcommand handles both pager and attachio so we don't need to run attachio twice. And chg.c will be free of pagerpid.

chg: decouple hgclient from setuppager procutil should not depend on hgclient. This patch makes the pager handling part independent from hgclient.

chg: decouple hgclient from setupsignalhandler procutil should not depend on hgclient. This patch makes the signal handling part independent from hgclient.

chg: move signal and pager handling to a separate file In the future hgclient will deal with pager directly inside runcommand, so related signal handling stuff needs to be decoupled from chg.c. The signal handling and pager logic are coupled because we need to forward SIGPIPE when pager exits. So they are moved together, otherwise a global variable (pagerpid) is inevitable. This patch moves related functions from chg.c to procutil.c, which was marked as copied to maintain annotate history. The move is done without code modification for easy review, therefore `#include "procutil.c"` was introduced temporarily.

keepalive: rewrite readline() The old method was performing string concatenation, which is slower than collecting raw chunks in a list and joining at the end.

keepalive: remove limit argument from readline() It is unused and adds complexity.

keepalive: don't concatenate strings when reading chunked transfer Surprisingly, this didn't appear to speed up HTTP-based stream cloning on my machine. I suspect this has more to do with the fact we're using small HTTP chunks and string concatenation overhead isn't so bad. However, the reasons for this change are solid: we know string concatenation can be a performance sink.

exchange: use rich class for sorting clone bundle entries Python 3 removed the "cmp" argument from sorted(). Custom sorting in Python 3 must be implemented with the dunder comparison methods on types and/or with a "key" function. This patch converts our custom "cmp" function to a custom type. The implementation is very similar to functools.cmp_to_key(). However, cmp_to_key() doesn't exist in Python 2, so we can't use it. This was the only use of the "cmp" argument to sorted() in the code base.

Added signature for changeset e69874dc1f4e

Added tag 4.0.2 for changeset e69874dc1f4e

i18n-ja: synchronized with 5f33116cd787

chg: respect XDG_RUNTIME_DIR $XDG_RUNTIME_DIR [1] is a better place for user daemons. Let's use it and fallback to $TMPDIR. After this patch, chg will try socket paths in the following order: 1. $CHGSOCKNAME 2. $XDG_RUNTIME_DIR/chg/server 3. ${TMPDIR:-tmp}/chg$UID/server [1]: https://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

chg: make "get default sockdir" a separate method The logic to get a default socket directory will become longer in the next patch. So let's move it out.

chg: handle connect failure before errno gets overridden This patch moves the error handling logic up so that errno after connect won't be overridden.

py3: have a bytes version of shlex.split() shlex.split() only accepts unicodes on Python 3. After this patch we will be using pycompat.shlexsplit(). This patch also replaces existing occurences of shlex.split with pycompat.shlexsplit.

chg: support long socket path This patch replaces UNIX_PATH_MAX (108) with PATH_MAX (4096) so we can have long unix path.

chg: remove sockdirfd See the previous patch for the reason.

chg: let hgc_open support long path "sizeof(sun_path)" is too small. Use the chdir trick to support long socket path, like "mercurial.util.bindunixsocket". It's useful for cases where TMPDIR is long. Modern OS X rewrites TMPDIR to a long value. And we probably want to use XDG_RUNTIME_DIR [2] for Linux. The approach is a bit different from the previous plan, where we will have hgc_openat and pass cmdserveropts.sockdirfd to it. That's because the current change is easier: chg has to pass a full path to "hg" as the "--address" parameter. There is no "--address-basename" or "--address-dirfd" flags. The next patch will remove "sockdirfd". Note: It'd be nice if we can use a native "connectat" implementation. However, that's not available everywhere. Some platform (namely FreeBSD) does support it, but the implementation has bugs so it cannot be used [2]. [1]: https://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html [2]: https://www.mercurial-scm.org/pipermail/mercurial-devel/2016-April/082892.html

rebase: un-wrap function signature since it fits in 80 columns

py3: exclude pywatchman from test-check-py3-compat.t Exclude pywatchman from py3 test. They have already worked on Python 3 compatibility https://github.com/facebook/watchman/pull/247

py3: update test-check-py3-compat.t This part of test runs only on py3. This change was introduced by 16f4b341288d.

shelve: choose a legal shelve name when no name is passed (issue5112) Currently if our branch name contains '\' or starts with '.', shelve chooses an illegal shelve name. This behaviour is not good as it itself is choosing something which it won't accept further. We can raise errors if user passes a name which is illegal. After this patch, if '\' is contained in branch name or bookmark name, it will be replaced by '_' while choosing a shelve name and if they starts with '.', the first '.' is replaced by '_'.

shelve: add tests to ensure illegal shelve names are avoided We avoid '.' as the first letter of shelve name so that we don't create hidden file. We also avoid slashes in name so that we don't form a new directory

py3: replace sys.executable with pycompat.sysexecutable sys.executable returns unicodes on Python 3. This patch replaces occurences of sys.executable with pycompat.sysexecutable.

py3: have bytes version of sys.executable sys.executable on Python 3 returns unicodes and we want bytes. So this patch adds a new pycompat.sysexecutable which returns bytes by encoding using os.fsencode() since it is path variable.

py3: use pycompat.getcwd instead of os.getcwd

py3: use python 3 compatible variables in hgext/fsmontor/__init__.py Earlier this was left thinking that its part of pywatchman package. This patch replaces variables os.sep, sys.platform and os.envrion with their py3 compatible ones.

py3: add warnings in check-code related to py3 We have our own bytes versions of things like, getopt.getopt, os.sep, os.name, sys.executable, os.environ and few more for python 3 portability. Its better to come up with warnings if someone breaks the things which we have fixed. After this patch, check-code will warn us to use our bytes version. These checks run on mercurial/ and hgext/ and pycompat.py is excluded.

py3: replace os.getenv with pycompat.osgetenv os.getenv deals with unicodes on Python 3, so we have pycompat.osgetenv to deal with bytes. This patch replaces occurrences on os.getenv with pycompat.osgetenv

py3: have bytes version of os.getenv os.getenv() on python 3 deals with unicodes. If we want to pass bytes. we have os.getenvb() which deals with bytes. This patch adds up a pycompat.osgetenv which deals with bytes on both python 2 and 3.

url: remove unnecessary deletion of environ variables while dealing with proxy Currently we delete proxy environment variables if ui.config contains proxy values. This is unnecessary because urllib2.ProxyHandler class only reads proxy from environment it is initialised by None. But url.py never passes None, so there is no point urllib2 will take environment variables in account. This also prevents deleting environment variables which is not safe. This code was introduced while resolving Bug 2451 even it is in one of comments (sixth one) on bug that we can safely remove this part. Link to bug : https://bz.mercurial-scm.org/show_bug.cgi?id=2451

convert: add config option to control storing original revision common.commit.__init__ sets saverev=True by default. The side effect of this is that the hg sink will always set the "convert_revision" extras key to the commit being converted. This patch adds a config option to disable this behavior. While most consumers will want "convert_revision" to be a) written b) with the exact Git commit that was converted, some have use cases that prefer otherwise. In my case, I am performing significant rewrites of a Git repository *before* it is fed into `hg convert`. I have to do this because `hg convert` does not easily support the kind of transform I desire, even with extensions. (For the curious, I am "linearizing" the history of a GitHub repo by removing merge commits which add little value to the final history. It isn't easy to do this during `hg convert` because of Mercurial's file copy/rename metadata requirements.) In my scenario, my pre-convert transform stores a "convert_revision" key in the Git commit object containing the original Git commit ID. I want this original Git commit ID carried forward to Mercurial. By disabling the setting of this extra during `hg convert` and copying the value from the Git commit object, I can have the final "convert_revision" extra key contain the original Git commit ID. An added test verifies this exact scenario. This feature could likely be implemented for other VCS sources. But until someone needs the feature, I'm inclined to hold off implementing.