killdaemons: close pid file before killing processes
With #serve enabled on Windows, I was getting occasional stacktraces like this:
Errored test-hgweb-json.t: Traceback (most recent call last):
File "./run-tests.py", line 724, in run
self.tearDown()
File "./run-tests.py", line 805, in tearDown
killdaemons(entry)
File "./run-tests.py", line 540, in killdaemons
logfn=vlog)
File "...\tests\killdaemons.py", line 94, in killdaemons
os.unlink(pidfile)
WindowsError: [Error 32] The process cannot access the file because it is
being used by another process: '...\\hgtests.zmpqj3\\child80\\daemon.pids'
Adrian suggested using util.posixfile, which works. However, the 'mercurial'
package isn't in sys.path when invoking run-tests.py, and it isn't clear that
hacking[1] it in is a good thing (especially for test-run-tests.t, which uses an
installation in a temp folder).
I tried using ProcessMonitor to figure out what the other process is, but that
monitoring slows things down to such a degree that the issue doesn't occur. I
was ready to blame the virus scanner, but it happens without that too.
Looking at the code, I don't see anything that would have the pid file open.
But I was able to get through about 20 full test runs without an issue with this
minor change, whereas before it was pretty certain to hit this at least once in
two or three runs.
[1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-May/097907.html
# Create server
$ hg init server
$ cd server
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
$ cd ../
# Clone server and enable extensions
$ hg clone -q server client
$ cd client
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
# Commit file that will trigger the noop extension
$ echo '[NOOP]' > noop
$ hg commit -Aqm "noop"
# Commit file that will trigger the base64 extension
$ echo '[BASE64]' > base64
$ hg commit -Aqm 'base64'
# Commit file that will trigger the gzip extension
$ echo '[GZIP]' > gzip
$ hg commit -Aqm 'gzip'
# Commit file that will trigger noop and base64
$ echo '[NOOP][BASE64]' > noop-base64
$ hg commit -Aqm 'noop+base64'
# Commit file that will trigger noop and gzip
$ echo '[NOOP][GZIP]' > noop-gzip
$ hg commit -Aqm 'noop+gzip'
# Commit file that will trigger base64 and gzip
$ echo '[BASE64][GZIP]' > base64-gzip
$ hg commit -Aqm 'base64+gzip'
# Commit file that will trigger base64, gzip and noop
$ echo '[BASE64][GZIP][NOOP]' > base64-gzip-noop
$ hg commit -Aqm 'base64+gzip+noop'
# TEST: ensure the revision data is consistent
$ hg cat noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r . base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r . gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r . noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r . noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r . base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r . base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# Push to the server
$ hg push
pushing to $TESTTMP/server (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 7 changesets with 7 changes to 7 files
# Initialize new client (not cloning) and setup extension
$ cd ..
$ hg init client2
$ cd client2
$ cat >> .hg/hgrc << EOF
> [paths]
> default = $TESTTMP/server
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
# Pull from server and update to latest revision
$ hg pull default
pulling from $TESTTMP/server (glob)
requesting all changes
adding changesets
adding manifests
adding file changes
added 7 changesets with 7 changes to 7 files
(run 'hg update' to get a working copy)
$ hg update
7 files updated, 0 files merged, 0 files removed, 0 files unresolved
# TEST: ensure the revision data is consistent
$ hg cat noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r . base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r . gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r . noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r . noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r . base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r . base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# TEST: ensure a missing processor is handled
$ echo '[FAIL][BASE64][GZIP][NOOP]' > fail-base64-gzip-noop
$ hg commit -Aqm 'fail+base64+gzip+noop'
abort: missing processor for flag '0x1'!
[255]
# TEST: ensure we cannot register several flag processors on the same flag
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> duplicate=$TESTDIR/flagprocessorext.py
> EOF
$ echo 'this should fail' > file
$ hg commit -Aqm 'add file'
abort: cannot register multiple processors on flag '0x8'.
[255]
$ cd ..
# TEST: bundle repo
$ hg init bundletest
$ cd bundletest
$ cat >> .hg/hgrc << EOF
> [extensions]
> flagprocessor=$TESTDIR/flagprocessorext.py
> EOF
$ for i in 0 single two three 4; do
> echo '[BASE64]a-bit-longer-'$i > base64
> hg commit -m base64-$i -A base64
> done
$ hg update 2 -q
$ echo '[BASE64]a-bit-longer-branching' > base64
$ hg commit -q -m branching
$ hg bundle --base 1 bundle.hg
4 changesets found
$ hg --config extensions.strip= strip -r 2 --no-backup --force -q
$ hg -R bundle.hg log --stat -T '{rev} {desc}\n' base64
5 branching
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
4 base64-4
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
3 base64-three
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
2 base64-two
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
1 base64-single
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
0 base64-0
base64 | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg bundle -R bundle.hg --base 1 bundle-again.hg -q
$ hg -R bundle-again.hg log --stat -T '{rev} {desc}\n' base64
5 branching
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
4 base64-4
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
3 base64-three
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
2 base64-two
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
1 base64-single
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
0 base64-0
base64 | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ rm bundle.hg bundle-again.hg
# TEST: hg status
$ hg status
$ hg diff