wireproto: declare operation type for most commands (BC) (SEC)
The permissions model of hgweb relies on a dictionary to declare
the operation associated with each command - either "pull" or
"push." This dictionary was established by d3147b4e3e8a in 2008.
Unfortunately, we neglected to update this dictionary as new
wire protocol commands were introduced.
This commit defines the operations of most wire protocol commands
in the permissions dictionary. The "batch" command is omitted because
it is special and requires a more complex solution.
Since permissions checking is skipped unless a command has an entry in
this dictionary (this security issue will be addressed in a subsequent
commit), the practical effect of this change is that various wire
protocol commands now HTTP 401 if web.deny_read or web.allow-pull,
etc are set to deny access. This is reflected by test changes. Note
how various `hg pull` and `hg push` operations now fail before
discovery. (They fail during the initial "capabilities" request.)
This change fixes a security issue where built-in wire protocol
commands would return repository data even if the web config were
configured to deny access to that data.
I'm on the fence as to whether we should HTTP 401 the capabilities
request. On one hand, it can expose repository metadata and can tell
callers things like what version of Mercurial the server is running.
On the other hand, a client may need to know the capabilities in order
to authenticate in a follow-up request. It appears that Mercurial
clients handle the HTTP 401 on *any* protocol request, so we should
be OK sending a 401 for "capabilities." But if this causes problems,
it should be possible to allow "capabilities" to always work.
.. bc::
Various read-only wire protocol commands now return HTTP 401
Unauthorized if the hgweb configuration denies read/pull access to
the repository.
Previously, various wire protocol commands would still work and
return data if read access was disabled.
# Copyright 2009-2010 Gregory P. Ward
# Copyright 2009-2010 Intelerad Medical Systems Incorporated
# Copyright 2010-2011 Fog Creek Software
# Copyright 2010-2011 Unity Technologies
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''setup for largefiles extension: uisetup'''
from __future__ import absolute_import
from mercurial.i18n import _
from mercurial.hgweb import (
webcommands,
)
from mercurial import (
archival,
cmdutil,
commands,
copies,
exchange,
extensions,
filemerge,
hg,
httppeer,
merge,
scmutil,
sshpeer,
subrepo,
upgrade,
url,
wireproto,
)
from . import (
overrides,
proto,
)
def uisetup(ui):
# Disable auto-status for some commands which assume that all
# files in the result are under Mercurial's control
entry = extensions.wrapcommand(commands.table, 'add',
overrides.overrideadd)
addopt = [('', 'large', None, _('add as largefile')),
('', 'normal', None, _('add as normal file')),
('', 'lfsize', '', _('add all files above this size '
'(in megabytes) as largefiles '
'(default: 10)'))]
entry[1].extend(addopt)
# The scmutil function is called both by the (trivial) addremove command,
# and in the process of handling commit -A (issue3542)
extensions.wrapfunction(scmutil, 'addremove', overrides.scmutiladdremove)
extensions.wrapfunction(cmdutil, 'add', overrides.cmdutiladd)
extensions.wrapfunction(cmdutil, 'remove', overrides.cmdutilremove)
extensions.wrapfunction(cmdutil, 'forget', overrides.cmdutilforget)
extensions.wrapfunction(copies, 'pathcopies', overrides.copiespathcopies)
extensions.wrapfunction(upgrade, 'preservedrequirements',
overrides.upgraderequirements)
extensions.wrapfunction(upgrade, 'supporteddestrequirements',
overrides.upgraderequirements)
# Subrepos call status function
entry = extensions.wrapcommand(commands.table, 'status',
overrides.overridestatus)
extensions.wrapfunction(subrepo.hgsubrepo, 'status',
overrides.overridestatusfn)
entry = extensions.wrapcommand(commands.table, 'log',
overrides.overridelog)
entry = extensions.wrapcommand(commands.table, 'rollback',
overrides.overriderollback)
entry = extensions.wrapcommand(commands.table, 'verify',
overrides.overrideverify)
verifyopt = [('', 'large', None,
_('verify that all largefiles in current revision exists')),
('', 'lfa', None,
_('verify largefiles in all revisions, not just current')),
('', 'lfc', None,
_('verify local largefile contents, not just existence'))]
entry[1].extend(verifyopt)
entry = extensions.wrapcommand(commands.table, 'debugstate',
overrides.overridedebugstate)
debugstateopt = [('', 'large', None, _('display largefiles dirstate'))]
entry[1].extend(debugstateopt)
outgoing = lambda orgfunc, *arg, **kwargs: orgfunc(*arg, **kwargs)
entry = extensions.wrapcommand(commands.table, 'outgoing', outgoing)
outgoingopt = [('', 'large', None, _('display outgoing largefiles'))]
entry[1].extend(outgoingopt)
cmdutil.outgoinghooks.add('largefiles', overrides.outgoinghook)
entry = extensions.wrapcommand(commands.table, 'summary',
overrides.overridesummary)
summaryopt = [('', 'large', None, _('display outgoing largefiles'))]
entry[1].extend(summaryopt)
cmdutil.summaryremotehooks.add('largefiles', overrides.summaryremotehook)
entry = extensions.wrapcommand(commands.table, 'pull',
overrides.overridepull)
pullopt = [('', 'all-largefiles', None,
_('download all pulled versions of largefiles (DEPRECATED)')),
('', 'lfrev', [],
_('download largefiles for these revisions'), _('REV'))]
entry[1].extend(pullopt)
entry = extensions.wrapcommand(commands.table, 'push',
overrides.overridepush)
pushopt = [('', 'lfrev', [],
_('upload largefiles for these revisions'), _('REV'))]
entry[1].extend(pushopt)
extensions.wrapfunction(exchange, 'pushoperation',
overrides.exchangepushoperation)
entry = extensions.wrapcommand(commands.table, 'clone',
overrides.overrideclone)
cloneopt = [('', 'all-largefiles', None,
_('download all versions of all largefiles'))]
entry[1].extend(cloneopt)
extensions.wrapfunction(hg, 'clone', overrides.hgclone)
extensions.wrapfunction(hg, 'postshare', overrides.hgpostshare)
entry = extensions.wrapcommand(commands.table, 'cat',
overrides.overridecat)
extensions.wrapfunction(merge, '_checkunknownfile',
overrides.overridecheckunknownfile)
extensions.wrapfunction(merge, 'calculateupdates',
overrides.overridecalculateupdates)
extensions.wrapfunction(merge, 'recordupdates',
overrides.mergerecordupdates)
extensions.wrapfunction(merge, 'update', overrides.mergeupdate)
extensions.wrapfunction(filemerge, '_filemerge',
overrides.overridefilemerge)
extensions.wrapfunction(cmdutil, 'copy', overrides.overridecopy)
# Summary calls dirty on the subrepos
extensions.wrapfunction(subrepo.hgsubrepo, 'dirty', overrides.overridedirty)
extensions.wrapfunction(cmdutil, 'revert', overrides.overriderevert)
extensions.wrapcommand(commands.table, 'archive',
overrides.overridearchivecmd)
extensions.wrapfunction(archival, 'archive', overrides.overridearchive)
extensions.wrapfunction(subrepo.hgsubrepo, 'archive',
overrides.hgsubrepoarchive)
extensions.wrapfunction(webcommands, 'archive', overrides.hgwebarchive)
extensions.wrapfunction(cmdutil, 'bailifchanged',
overrides.overridebailifchanged)
extensions.wrapfunction(cmdutil, 'postcommitstatus',
overrides.postcommitstatus)
extensions.wrapfunction(scmutil, 'marktouched',
overrides.scmutilmarktouched)
extensions.wrapfunction(url, 'open',
overrides.openlargefile)
# create the new wireproto commands ...
wireproto.commands['putlfile'] = (proto.putlfile, 'sha')
wireproto.commands['getlfile'] = (proto.getlfile, 'sha')
wireproto.commands['statlfile'] = (proto.statlfile, 'sha')
# ... and wrap some existing ones
wireproto.commands['heads'] = (proto.heads, '')
wireproto.commands['lheads'] = (wireproto.heads, '')
# make putlfile behave the same as push and {get,stat}lfile behave
# the same as pull w.r.t. permissions checks
wireproto.permissions['putlfile'] = 'push'
wireproto.permissions['getlfile'] = 'pull'
wireproto.permissions['statlfile'] = 'pull'
wireproto.permissions['lheads'] = 'pull'
extensions.wrapfunction(webcommands, 'decodepath', overrides.decodepath)
extensions.wrapfunction(wireproto, '_capabilities', proto._capabilities)
# can't do this in reposetup because it needs to have happened before
# wirerepo.__init__ is called
proto.ssholdcallstream = sshpeer.sshpeer._callstream
proto.httpoldcallstream = httppeer.httppeer._callstream
sshpeer.sshpeer._callstream = proto.sshrepocallstream
httppeer.httppeer._callstream = proto.httprepocallstream
# override some extensions' stuff as well
for name, module in extensions.extensions():
if name == 'purge':
extensions.wrapcommand(getattr(module, 'cmdtable'), 'purge',
overrides.overridepurge)
if name == 'rebase':
extensions.wrapcommand(getattr(module, 'cmdtable'), 'rebase',
overrides.overriderebase)
extensions.wrapfunction(module, 'rebase',
overrides.overriderebase)
if name == 'transplant':
extensions.wrapcommand(getattr(module, 'cmdtable'), 'transplant',
overrides.overridetransplant)