revset: stop serializing node when using "%ln"
Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?
In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".
This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.
Here are some relevant poulpe benchmarks:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 44.235070
after: 20.416329 (-53.85%, -23.82)
## benchmark.variants.revs = any-100-extra-rev
before: 49.234697
after: 26.519829 (-46.14%, -22.71)
### benchmark.name = hg.command.bundle
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.revs = all
# benchmark.variants.type = none-streamv2
## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog
before: 10.138396
after: 7.750458 (-23.55%, -2.39)
## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog
before: 1.263859
after: 0.700229 (-44.60%, -0.56)
## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after: 346.5089 (-13.26%, -52.98)
## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog
before: 4.540080
after: 3.401700 (-25.07%, -1.14)
## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog
before: 2.975765
after: 1.870798 (-37.13%, -1.10)
#testcases flat tree
#testcases lfs-on lfs-off
#if lfs-on
$ cat >> $HGRCPATH <<EOF
> [extensions]
> lfs =
> EOF
#endif
$ . "$TESTDIR/narrow-library.sh"
#if tree
$ cat << EOF >> $HGRCPATH
> [experimental]
> treemanifest = 1
> EOF
#endif
create full repo
$ hg init master
$ cd master
$ cat >> .hg/hgrc <<EOF
> [narrow]
> serveellipses=True
> EOF
$ mkdir inside
$ echo inside > inside/f1
$ mkdir outside
$ echo outside > outside/f1
$ hg ci -Aqm 'initial'
$ echo modified > inside/f1
$ hg ci -qm 'modify inside'
$ hg co -q 0
$ echo modified > outside/f1
$ hg ci -qm 'modify outside'
$ echo modified again >> outside/f1
$ hg ci -qm 'modify outside again'
$ cd ..
$ hg clone --narrow ssh://user@dummy/master narrow --include inside
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 2 changes to 1 files (+1 heads)
new changesets *:* (glob)
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd narrow
$ cat >> $HGRCPATH <<EOF
> [extensions]
> strip=
> EOF
Can strip and recover changesets affecting only files within narrow spec
$ hg co -r 'desc("modify inside")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -f .hg/strip-backup/*-backup.hg
$ hg strip .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg unbundle .hg/strip-backup/*-backup.hg
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets * (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
Can strip and recover changesets affecting files outside of narrow spec
$ hg co -r 'desc("modify outside")'
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -G -T '{rev} {desc}\n'
o 2 modify inside
|
| @ 1 modify outside again
|/
o 0 initial
$ hg debugdata -m 1
inside/f1\x004d6a634d5ba06331a60c29ee0db8412490a54fcd (esc) (flat !)
outside/f1\x0084ba604d54dee1f13310ce3d4ac2e8a36636691a (esc) (flat !)
inside\x006a8bc41df94075d501f9740587a0c0e13c170dc5t (esc) (tree !)
outside\x00255c2627ebdd3c7dcaa6945246f9b9f02bd45a09t (esc) (tree !)
$ rm -f .hg/strip-backup/*-backup.hg
$ hg strip .
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg unbundle .hg/strip-backup/*-backup.hg
adding changesets
adding manifests
adding file changes
added 1 changesets with 0 changes to 0 files (+1 heads)
new changesets * (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg log -G -T '{rev} {desc}\n'
o 2 modify outside again
|
| o 1 modify inside
|/
@ 0 initial
Check that hash of file outside narrow spec got restored
$ hg debugdata -m 2
inside/f1\x004d6a634d5ba06331a60c29ee0db8412490a54fcd (esc) (flat !)
outside/f1\x0084ba604d54dee1f13310ce3d4ac2e8a36636691a (esc) (flat !)
inside\x006a8bc41df94075d501f9740587a0c0e13c170dc5t (esc) (tree !)
outside\x00255c2627ebdd3c7dcaa6945246f9b9f02bd45a09t (esc) (tree !)
Also verify we can apply the bundle with 'hg pull':
$ hg co -r 'desc("modify inside")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm .hg/strip-backup/*-backup.hg
$ hg strip .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
#if repobundlerepo
$ hg pull .hg/strip-backup/*-backup.hg
pulling from .hg/strip-backup/*-backup.hg (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets * (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ rm .hg/strip-backup/*-backup.hg
$ hg strip 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg incoming .hg/strip-backup/*-backup.hg
comparing with .hg/strip-backup/*-backup.hg (glob)
changeset: 0:* (glob)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: initial
changeset: 1:9e48d953700d (flat !)
changeset: 1:3888164bccf0 (tree !)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify outside again
changeset: 2:f505d5e96aa8 (flat !)
changeset: 2:40b66f95a209 (tree !)
tag: tip
parent: 0:a99f4d53924d (flat !)
parent: 0:c2a5fabcca3c (tree !)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify inside
$ hg pull .hg/strip-backup/*-backup.hg
pulling from .hg/strip-backup/*-backup.hg (glob)
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 2 changes to 1 files (+1 heads)
new changesets *:* (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
#endif