revset: stop serializing node when using "%ln"
Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?
In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".
This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.
Here are some relevant poulpe benchmarks:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 44.235070
after: 20.416329 (-53.85%, -23.82)
## benchmark.variants.revs = any-100-extra-rev
before: 49.234697
after: 26.519829 (-46.14%, -22.71)
### benchmark.name = hg.command.bundle
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.revs = all
# benchmark.variants.type = none-streamv2
## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog
before: 10.138396
after: 7.750458 (-23.55%, -2.39)
## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog
before: 1.263859
after: 0.700229 (-44.60%, -0.56)
## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after: 346.5089 (-13.26%, -52.98)
## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog
before: 4.540080
after: 3.401700 (-25.07%, -1.14)
## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog
before: 2.975765
after: 1.870798 (-37.13%, -1.10)
#require serve
$ hg init a
$ cd a
$ echo a > a
$ hg ci -Ama -d '1123456789 0'
adding a
$ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
$ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null &
$ while [ ! -f proxy.pid ]; do sleep 0; done
$ cat proxy.pid >> $DAEMON_PIDS
url for proxy, stream
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b
streaming all changes
7 files to transfer, 412 bytes of data (reporevlogstore no-rust !)
9 files to transfer, 538 bytes of data (reporevlogstore rust !)
4 files to transfer, 330 bytes of data (reposimplestore !)
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b
$ hg verify -q
$ cd ..
url for proxy, pull
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b-pull
$ hg verify -q
$ cd ..
host:port for proxy
$ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
proxy url with user name and password
$ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
url with user name and password
$ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
bad host:port for proxy ("Protocol not supported" can happen on
misconfigured hosts)
$ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f
abort: error: (Connection refused|Protocol not supported|.* actively refused it|\$EADDRNOTAVAIL\$|No route to host) (re)
[100]
do not use the proxy if it is in the no list
$ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
proxy can't connect to server
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT2/ h
abort: HTTP Error 404: Connection refused
[100]
$ cat proxy.log
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&stream=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] code 404, message Connection refused (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT2/?cmd=capabilities HTTP/1.1" 404 - (glob)