revset: stop serializing node when using "%ln"
Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?
In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".
This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.
Here are some relevant poulpe benchmarks:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 44.235070
after: 20.416329 (-53.85%, -23.82)
## benchmark.variants.revs = any-100-extra-rev
before: 49.234697
after: 26.519829 (-46.14%, -22.71)
### benchmark.name = hg.command.bundle
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.revs = all
# benchmark.variants.type = none-streamv2
## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog
before: 10.138396
after: 7.750458 (-23.55%, -2.39)
## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog
before: 1.263859
after: 0.700229 (-44.60%, -0.56)
## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after: 346.5089 (-13.26%, -52.98)
## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog
before: 4.540080
after: 3.401700 (-25.07%, -1.14)
## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog
before: 2.975765
after: 1.870798 (-37.13%, -1.10)
$ . "$TESTDIR/histedit-helpers.sh"
$ cat >> $HGRCPATH <<EOF
> [extensions]
> histedit=
> EOF
$ hg init r
$ cd r
$ for x in a b c d e f ; do
> echo $x > $x
> hg add $x
> hg ci -m $x
> done
$ hg book -r 1 will-move-backwards
$ hg book -r 2 two
$ hg book -r 2 also-two
$ hg book -r 3 three
$ hg book -r 4 four
$ hg book -r tip five
$ hg log --graph
@ changeset: 5:652413bf663e
| bookmark: five
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: f
|
o changeset: 4:e860deea161a
| bookmark: four
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: e
|
o changeset: 3:055a42cdd887
| bookmark: three
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: d
|
o changeset: 2:177f92b77385
| bookmark: also-two
| bookmark: two
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: c
|
o changeset: 1:d2ae7f538514
| bookmark: will-move-backwards
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: b
|
o changeset: 0:cb9a9f314b8b
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: a
$ HGEDITOR=cat hg histedit 1
pick d2ae7f538514 1 b
pick 177f92b77385 2 c
pick 055a42cdd887 3 d
pick e860deea161a 4 e
pick 652413bf663e 5 f
# Edit history between d2ae7f538514 and 652413bf663e
#
# Commits are listed from least to most recent
#
# You can reorder changesets by reordering the lines
#
# Commands:
#
# e, edit = use commit, but allow edits before making new commit
# m, mess = edit commit message without changing commit content
# p, pick = use commit
# b, base = checkout changeset and apply further changesets from there
# d, drop = remove commit from history
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description and date
#
$ hg histedit 1 --commands - --verbose << EOF | grep histedit
> pick 177f92b77385 2 c
> drop d2ae7f538514 1 b
> pick 055a42cdd887 3 d
> fold e860deea161a 4 e
> pick 652413bf663e 5 f
> EOF
saved backup bundle to $TESTTMP/r/.hg/strip-backup/96e494a2d553-45c027ab-histedit.hg
$ hg log --graph
@ changeset: 3:cacdfd884a93
| bookmark: five
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: f
|
o changeset: 2:59d9f330561f
| bookmark: four
| bookmark: three
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: d
|
o changeset: 1:b346ab9a313d
| bookmark: also-two
| bookmark: two
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: c
|
o changeset: 0:cb9a9f314b8b
bookmark: will-move-backwards
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: a
$ HGEDITOR=cat hg histedit 1
pick b346ab9a313d 1 c
pick 59d9f330561f 2 d
pick cacdfd884a93 3 f
# Edit history between b346ab9a313d and cacdfd884a93
#
# Commits are listed from least to most recent
#
# You can reorder changesets by reordering the lines
#
# Commands:
#
# e, edit = use commit, but allow edits before making new commit
# m, mess = edit commit message without changing commit content
# p, pick = use commit
# b, base = checkout changeset and apply further changesets from there
# d, drop = remove commit from history
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description and date
#
$ hg histedit 1 --commands - --verbose << EOF | grep histedit
> pick b346ab9a313d 1 c
> pick cacdfd884a93 3 f
> pick 59d9f330561f 2 d
> EOF
saved backup bundle to $TESTTMP/r/.hg/strip-backup/59d9f330561f-073008af-histedit.hg
We expect 'five' to stay at tip, since the tipmost bookmark is most
likely the useful signal.
$ hg log --graph
@ changeset: 3:c04e50810e4b
| bookmark: five
| bookmark: four
| bookmark: three
| tag: tip
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: d
|
o changeset: 2:c13eb81022ca
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: f
|
o changeset: 1:b346ab9a313d
| bookmark: also-two
| bookmark: two
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: c
|
o changeset: 0:cb9a9f314b8b
bookmark: will-move-backwards
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: a