revset: stop serializing node when using "%ln"
Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?
In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".
This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.
Here are some relevant poulpe benchmarks:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 44.235070
after: 20.416329 (-53.85%, -23.82)
## benchmark.variants.revs = any-100-extra-rev
before: 49.234697
after: 26.519829 (-46.14%, -22.71)
### benchmark.name = hg.command.bundle
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.revs = all
# benchmark.variants.type = none-streamv2
## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog
before: 10.138396
after: 7.750458 (-23.55%, -2.39)
## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog
before: 1.263859
after: 0.700229 (-44.60%, -0.56)
## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after: 346.5089 (-13.26%, -52.98)
## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog
before: 4.540080
after: 3.401700 (-25.07%, -1.14)
## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog
before: 2.975765
after: 1.870798 (-37.13%, -1.10)
#require no-chg
Test basic extension support
$ cat > foobar.py <<EOF
> import os
> from mercurial import commands, registrar
> cmdtable = {}
> command = registrar.command(cmdtable)
> configtable = {}
> configitem = registrar.configitem(configtable)
> configitem(b'tests', b'foo', default=b"Foo")
> def uisetup(ui):
> ui.debug(b"uisetup called [debug]\\n")
> ui.write(b"uisetup called\\n")
> ui.status(b"uisetup called [status]\\n")
> ui.flush()
> def reposetup(ui, repo):
> ui.write(b"reposetup called for %s\\n" % os.path.basename(repo.root))
> ui.write(b"ui %s= repo.ui\\n" % (ui == repo.ui and b"=" or b"!"))
> ui.flush()
> @command(b'foo', [], b'hg foo')
> def foo(ui, *args, **kwargs):
> foo = ui.config(b'tests', b'foo')
> ui.write(foo)
> ui.write(b"\\n")
> @command(b'bar', [], b'hg bar', norepo=True)
> def bar(ui, *args, **kwargs):
> ui.write(b"Bar\\n")
> EOF
$ abspath=`pwd`/foobar.py
$ mkdir barfoo
$ cp foobar.py barfoo/__init__.py
$ barfoopath=`pwd`/barfoo
$ hg init a
$ cd a
$ echo foo > file
$ hg add file
$ hg commit -m 'add file'
$ echo '[extensions]' >> $HGRCPATH
$ echo "foobar = $abspath" >> $HGRCPATH
$ filterlog () {
> sed -e 's!^[0-9/]* [0-9:]* ([0-9]*)>!YYYY/MM/DD HH:MM:SS (PID)>!'
> }
Test extension setup timings
$ hg foo --traceback --config devel.debug.extensions=yes --debug 2>&1 | filterlog
YYYY/MM/DD HH:MM:SS (PID)> loading extensions
YYYY/MM/DD HH:MM:SS (PID)> - processing 1 entries
YYYY/MM/DD HH:MM:SS (PID)> - loading extension: foobar
YYYY/MM/DD HH:MM:SS (PID)> > foobar extension loaded in * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - validating extension tables: foobar
YYYY/MM/DD HH:MM:SS (PID)> - invoking registered callbacks: foobar
YYYY/MM/DD HH:MM:SS (PID)> > callbacks completed in * (glob)
YYYY/MM/DD HH:MM:SS (PID)> > loaded 1 extensions, total time * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - loading configtable attributes
YYYY/MM/DD HH:MM:SS (PID)> - executing uisetup hooks
YYYY/MM/DD HH:MM:SS (PID)> - running uisetup for foobar
uisetup called [debug]
uisetup called
uisetup called [status]
YYYY/MM/DD HH:MM:SS (PID)> > uisetup for foobar took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> > all uisetup took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - executing extsetup hooks
YYYY/MM/DD HH:MM:SS (PID)> - running extsetup for foobar
YYYY/MM/DD HH:MM:SS (PID)> > extsetup for foobar took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> > all extsetup took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - executing remaining aftercallbacks
YYYY/MM/DD HH:MM:SS (PID)> > remaining aftercallbacks completed in * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - loading extension registration objects
YYYY/MM/DD HH:MM:SS (PID)> > extension registration object loading took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> > extension foobar take a total of * to load (glob)
YYYY/MM/DD HH:MM:SS (PID)> extension loading complete
YYYY/MM/DD HH:MM:SS (PID)> loading additional extensions
YYYY/MM/DD HH:MM:SS (PID)> - processing 1 entries
YYYY/MM/DD HH:MM:SS (PID)> > loaded 0 extensions, total time * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - loading configtable attributes
YYYY/MM/DD HH:MM:SS (PID)> - executing uisetup hooks
YYYY/MM/DD HH:MM:SS (PID)> > all uisetup took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - executing extsetup hooks
YYYY/MM/DD HH:MM:SS (PID)> > all extsetup took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - executing remaining aftercallbacks
YYYY/MM/DD HH:MM:SS (PID)> > remaining aftercallbacks completed in * (glob)
YYYY/MM/DD HH:MM:SS (PID)> - loading extension registration objects
YYYY/MM/DD HH:MM:SS (PID)> > extension registration object loading took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> extension loading complete
YYYY/MM/DD HH:MM:SS (PID)> - executing reposetup hooks
YYYY/MM/DD HH:MM:SS (PID)> - running reposetup for foobar
reposetup called for a
ui == repo.ui
YYYY/MM/DD HH:MM:SS (PID)> > reposetup for foobar took * (glob)
YYYY/MM/DD HH:MM:SS (PID)> > all reposetup took * (glob)
Foo
$ cd ..
$ echo 'foobar = !' >> $HGRCPATH