tests/test-check-interfaces.py
author Pierre-Yves David <pierre-yves.david@octobus.net>
Fri, 05 Apr 2024 11:05:54 +0200
changeset 51576 de5bf3fe0233
parent 48946 642e31cb55f0
permissions -rw-r--r--
revset: stop serializing node when using "%ln" Turning hundred of thousand of node from node to hex and back can be slow… what about we stop doing it? In many case were we are using node id we should be using revision id. However this is not a good reason to have a stupidly slow implementation of "%ln". This caught my attention again because the phase discovery during push make an extensive use of "%ln" or huge set. In absolute, that phase discovery probably should use "%ld" and need to improves its algorithmic complexity, but improving "%ln" seems simple and long overdue. This greatly speeds up `hg push` on repository with many drafts. Here are some relevant poulpe benchmarks: ### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog # benchmark.name = hg.command.push # bin-env-vars.hg.flavor = default # bin-env-vars.hg.py-re2-module = default # benchmark.variants.explicit-rev = all-out-heads # benchmark.variants.issue6528 = disabled # benchmark.variants.protocol = ssh # benchmark.variants.reuse-external-delta-parent = default ## benchmark.variants.revs = any-1-extra-rev before: 44.235070 after: 20.416329 (-53.85%, -23.82) ## benchmark.variants.revs = any-100-extra-rev before: 49.234697 after: 26.519829 (-46.14%, -22.71) ### benchmark.name = hg.command.bundle # bin-env-vars.hg.flavor = default # bin-env-vars.hg.py-re2-module = default # benchmark.variants.revs = all # benchmark.variants.type = none-streamv2 ## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog before: 10.138396 after: 7.750458 (-23.55%, -2.39) ## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog before: 1.263859 after: 0.700229 (-44.60%, -0.56) ## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog before: 399.484481 after: 346.5089 (-13.26%, -52.98) ## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog before: 4.540080 after: 3.401700 (-25.07%, -1.14) ## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog before: 2.975765 after: 1.870798 (-37.13%, -1.10)

# Test that certain objects conform to well-defined interfaces.


from mercurial import encoding

encoding.environ[b'HGREALINTERFACES'] = b'1'

import os
import subprocess
import sys

# Only run if tests are run in a repo
if subprocess.call(
    [sys.executable, '%s/hghave' % os.environ['TESTDIR'], 'test-repo']
):
    sys.exit(80)

from mercurial.interfaces import (
    dirstate as intdirstate,
    repository,
)
from mercurial.thirdparty.zope import interface as zi
from mercurial.thirdparty.zope.interface import verify as ziverify
from mercurial import (
    bundlerepo,
    dirstate,
    filelog,
    httppeer,
    localrepo,
    manifest,
    pycompat,
    revlog,
    sshpeer,
    statichttprepo,
    ui as uimod,
    unionrepo,
    vfs as vfsmod,
    wireprotoserver,
    wireprototypes,
    wireprotov1peer,
)

testdir = os.path.dirname(__file__)
rootdir = pycompat.fsencode(os.path.normpath(os.path.join(testdir, '..')))

sys.path[0:0] = [testdir]
import simplestorerepo

del sys.path[0]


def checkzobject(o, allowextra=False):
    """Verify an object with a zope interface."""
    ifaces = zi.providedBy(o)
    if not ifaces:
        print('%r does not provide any zope interfaces' % o)
        return

    # Run zope.interface's built-in verification routine. This verifies that
    # everything that is supposed to be present is present.
    for iface in ifaces:
        ziverify.verifyObject(iface, o)

    if allowextra:
        return

    # Now verify that the object provides no extra public attributes that
    # aren't declared as part of interfaces.
    allowed = set()
    for iface in ifaces:
        allowed |= set(iface.names(all=True))

    public = {a for a in dir(o) if not a.startswith('_')}

    for attr in sorted(public - allowed):
        print(
            'public attribute not declared in interfaces: %s.%s'
            % (o.__class__.__name__, attr)
        )


# Facilitates testing localpeer.
class dummyrepo:
    def __init__(self):
        self.ui = uimod.ui()
        self._wanted_sidedata = set()

    def filtered(self, name):
        pass

    def _restrictcapabilities(self, caps):
        pass


class dummyopener:
    handlers = []


# Facilitates testing sshpeer without requiring a server.
class badpeer(httppeer.httppeer):
    def __init__(self):
        super(badpeer, self).__init__(
            None, None, None, dummyopener(), None, None
        )
        self.badattribute = True

    def badmethod(self):
        pass


class dummypipe:
    def close(self):
        pass

    @property
    def closed(self):
        pass


def main():
    ui = uimod.ui()
    # Needed so we can open a local repo with obsstore without a warning.
    ui.setconfig(b'experimental', b'evolution.createmarkers', True)

    checkzobject(badpeer())

    ziverify.verifyClass(repository.ipeerbase, httppeer.httppeer)
    checkzobject(httppeer.httppeer(None, None, None, dummyopener(), None, None))

    ziverify.verifyClass(repository.ipeerbase, localrepo.localpeer)
    checkzobject(localrepo.localpeer(dummyrepo()))

    ziverify.verifyClass(
        repository.ipeercommandexecutor, localrepo.localcommandexecutor
    )
    checkzobject(localrepo.localcommandexecutor(None))

    ziverify.verifyClass(
        repository.ipeercommandexecutor, wireprotov1peer.peerexecutor
    )
    checkzobject(wireprotov1peer.peerexecutor(None))

    ziverify.verifyClass(repository.ipeerbase, sshpeer.sshv1peer)
    checkzobject(
        sshpeer.sshv1peer(
            ui,
            b'ssh://localhost/foo',
            b'',
            dummypipe(),
            dummypipe(),
            None,
            None,
        )
    )

    ziverify.verifyClass(repository.ipeerbase, bundlerepo.bundlepeer)
    checkzobject(bundlerepo.bundlepeer(dummyrepo()))

    ziverify.verifyClass(repository.ipeerbase, statichttprepo.statichttppeer)
    checkzobject(statichttprepo.statichttppeer(dummyrepo()))

    ziverify.verifyClass(repository.ipeerbase, unionrepo.unionpeer)
    checkzobject(unionrepo.unionpeer(dummyrepo()))

    ziverify.verifyClass(
        repository.ilocalrepositorymain, localrepo.localrepository
    )
    ziverify.verifyClass(
        repository.ilocalrepositoryfilestorage, localrepo.revlogfilestorage
    )
    repo = localrepo.makelocalrepository(ui, rootdir)
    checkzobject(repo)

    ziverify.verifyClass(
        wireprototypes.baseprotocolhandler, wireprotoserver.sshv1protocolhandler
    )
    ziverify.verifyClass(
        wireprototypes.baseprotocolhandler,
        wireprotoserver.httpv1protocolhandler,
    )

    sshv1 = wireprotoserver.sshv1protocolhandler(None, None, None)
    checkzobject(sshv1)

    httpv1 = wireprotoserver.httpv1protocolhandler(None, None, None)
    checkzobject(httpv1)

    ziverify.verifyClass(repository.ifilestorage, filelog.filelog)
    ziverify.verifyClass(repository.imanifestdict, manifest.manifestdict)
    ziverify.verifyClass(repository.imanifestdict, manifest.treemanifest)
    ziverify.verifyClass(
        repository.imanifestrevisionstored, manifest.manifestctx
    )
    ziverify.verifyClass(
        repository.imanifestrevisionwritable, manifest.memmanifestctx
    )
    ziverify.verifyClass(
        repository.imanifestrevisionstored, manifest.treemanifestctx
    )
    ziverify.verifyClass(
        repository.imanifestrevisionwritable, manifest.memtreemanifestctx
    )
    ziverify.verifyClass(repository.imanifestlog, manifest.manifestlog)
    ziverify.verifyClass(repository.imanifeststorage, manifest.manifestrevlog)

    ziverify.verifyClass(
        repository.irevisiondelta, simplestorerepo.simplestorerevisiondelta
    )
    ziverify.verifyClass(repository.ifilestorage, simplestorerepo.filestorage)
    ziverify.verifyClass(
        repository.iverifyproblem, simplestorerepo.simplefilestoreproblem
    )

    ziverify.verifyClass(intdirstate.idirstate, dirstate.dirstate)

    vfs = vfsmod.vfs(b'.')
    fl = filelog.filelog(vfs, b'dummy.i')
    checkzobject(fl, allowextra=True)

    # Conforms to imanifestlog.
    ml = manifest.manifestlog(
        vfs,
        repo,
        manifest.manifestrevlog(repo.nodeconstants, repo.svfs),
        repo.narrowmatch(),
    )
    checkzobject(ml)
    checkzobject(repo.manifestlog)

    # Conforms to imanifestrevision.
    mctx = ml[repo[0].manifestnode()]
    checkzobject(mctx)

    # Conforms to imanifestrevisionwritable.
    checkzobject(mctx.copy())

    # Conforms to imanifestdict.
    checkzobject(mctx.read())

    mrl = manifest.manifestrevlog(repo.nodeconstants, vfs)
    checkzobject(mrl)

    ziverify.verifyClass(repository.irevisiondelta, revlog.revlogrevisiondelta)

    rd = revlog.revlogrevisiondelta(
        node=b'',
        p1node=b'',
        p2node=b'',
        basenode=b'',
        linknode=b'',
        flags=b'',
        baserevisionsize=None,
        revision=b'',
        sidedata=b'',
        delta=None,
        protocol_flags=b'',
    )
    checkzobject(rd)

    ziverify.verifyClass(repository.iverifyproblem, revlog.revlogproblem)
    checkzobject(revlog.revlogproblem())


main()