revset: stop serializing node when using "%ln"
Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?
In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".
This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.
Here are some relevant poulpe benchmarks:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 44.235070
after: 20.416329 (-53.85%, -23.82)
## benchmark.variants.revs = any-100-extra-rev
before: 49.234697
after: 26.519829 (-46.14%, -22.71)
### benchmark.name = hg.command.bundle
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.revs = all
# benchmark.variants.type = none-streamv2
## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog
before: 10.138396
after: 7.750458 (-23.55%, -2.39)
## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog
before: 1.263859
after: 0.700229 (-44.60%, -0.56)
## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after: 346.5089 (-13.26%, -52.98)
## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog
before: 4.540080
after: 3.401700 (-25.07%, -1.14)
## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog
before: 2.975765
after: 1.870798 (-37.13%, -1.10)
Tests for the automv extension; detect moved files at commit time.
$ cat >> $HGRCPATH << EOF
> [extensions]
> automv=
> rebase=
> EOF
Setup repo
$ hg init repo
$ cd repo
Test automv command for commit
$ printf 'foo\nbar\nbaz\n' > a.txt
$ hg add a.txt
$ hg commit -m 'init repo with a'
mv/rm/add
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --config automv.similarity='60' -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit -m 'msg'
nothing changed (1 missing files, see 'hg status')
[1]
$ hg status -C
! a.txt
? b.txt
$ hg revert -aqC
$ rm b.txt
mv/rm/add/notincommitfiles
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg status -C
A b.txt
A c.txt
R a.txt
$ hg commit c.txt -m 'msg'
created new head
$ hg status --change . -C
A c.txt
$ hg status -C
A b.txt
R a.txt
$ hg up -r 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg rm a.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --no-automv -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
Test automv command for commit --amend
mv/rm/add
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend --config automv.similarity='60' -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status -C
! a.txt
? b.txt
$ hg up -Cr 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/notincommitfiles
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > d.txt
$ hg add d.txt
$ hg status -C
A b.txt
A d.txt
R a.txt
$ hg commit --amend -m 'amended' d.txt
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A c.txt
A d.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
A d.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 3 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended' --no-automv
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/commit/add/amend
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg status -C
R a.txt
? b.txt
$ hg commit -m "removed a"
$ hg add b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
R a.txt
error conditions
$ cat >> $HGRCPATH << EOF
> [automv]
> similarity=110
> EOF
$ hg commit -m 'revision to amend to'
abort: automv.similarity must be between 0 and 100
[255]