revset: stop serializing node when using "%ln"
Turning hundred of thousand of node from node to hex and back can be slow… what
about we stop doing it?
In many case were we are using node id we should be using revision id. However
this is not a good reason to have a stupidly slow implementation of "%ln".
This caught my attention again because the phase discovery during push make an
extensive use of "%ln" or huge set. In absolute, that phase discovery probably
should use "%ld" and need to improves its algorithmic complexity, but improving
"%ln" seems simple and long overdue. This greatly speeds up `hg push` on
repository with many drafts.
Here are some relevant poulpe benchmarks:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 44.235070
after: 20.416329 (-53.85%, -23.82)
## benchmark.variants.revs = any-100-extra-rev
before: 49.234697
after: 26.519829 (-46.14%, -22.71)
### benchmark.name = hg.command.bundle
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.revs = all
# benchmark.variants.type = none-streamv2
## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog
before: 10.138396
after: 7.750458 (-23.55%, -2.39)
## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog
before: 1.263859
after: 0.700229 (-44.60%, -0.56)
## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
before: 399.484481
after: 346.5089 (-13.26%, -52.98)
## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog
before: 4.540080
after: 3.401700 (-25.07%, -1.14)
## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog
before: 2.975765
after: 1.870798 (-37.13%, -1.10)
# logexchange.py
#
# Copyright 2017 Augie Fackler <raf@durin42.com>
# Copyright 2017 Sean Farley <sean@farley.io>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from .node import hex
from . import (
util,
vfs as vfsmod,
)
from .utils import (
urlutil,
)
# directory name in .hg/ in which remotenames files will be present
remotenamedir = b'logexchange'
def readremotenamefile(repo, filename):
"""
reads a file from .hg/logexchange/ directory and yields it's content
filename: the file to be read
yield a tuple (node, remotepath, name)
"""
vfs = vfsmod.vfs(repo.vfs.join(remotenamedir))
if not vfs.exists(filename):
return
f = vfs(filename)
lineno = 0
for line in f:
line = line.strip()
if not line:
continue
# contains the version number
if lineno == 0:
lineno += 1
try:
node, remote, rname = line.split(b'\0')
yield node, remote, rname
except ValueError:
pass
f.close()
def readremotenames(repo):
"""
read the details about the remotenames stored in .hg/logexchange/ and
yields a tuple (node, remotepath, name). It does not yields information
about whether an entry yielded is branch or bookmark. To get that
information, call the respective functions.
"""
for bmentry in readremotenamefile(repo, b'bookmarks'):
yield bmentry
for branchentry in readremotenamefile(repo, b'branches'):
yield branchentry
def writeremotenamefile(repo, remotepath, names, nametype):
vfs = vfsmod.vfs(repo.vfs.join(remotenamedir))
f = vfs(nametype, b'w', atomictemp=True)
# write the storage version info on top of file
# version '0' represents the very initial version of the storage format
f.write(b'0\n\n')
olddata = set(readremotenamefile(repo, nametype))
# re-save the data from a different remote than this one.
for node, oldpath, rname in sorted(olddata):
if oldpath != remotepath:
f.write(b'%s\0%s\0%s\n' % (node, oldpath, rname))
for name, node in sorted(names.items()):
if nametype == b"branches":
for n in node:
f.write(b'%s\0%s\0%s\n' % (n, remotepath, name))
elif nametype == b"bookmarks":
if node:
f.write(b'%s\0%s\0%s\n' % (node, remotepath, name))
f.close()
def saveremotenames(repo, remotepath, branches=None, bookmarks=None):
"""
save remotenames i.e. remotebookmarks and remotebranches in their
respective files under ".hg/logexchange/" directory.
"""
wlock = repo.wlock()
try:
if bookmarks:
writeremotenamefile(repo, remotepath, bookmarks, b'bookmarks')
if branches:
writeremotenamefile(repo, remotepath, branches, b'branches')
finally:
wlock.release()
def activepath(repo, remote):
"""returns remote path"""
# is the remote a local peer
local = remote.local()
# determine the remote path from the repo, if possible; else just
# use the string given to us
rpath = remote
if local:
rpath = util.pconvert(remote._repo.root)
elif not isinstance(remote, bytes):
rpath = remote.url()
# represent the remotepath with user defined path name if exists
for path, url in repo.ui.configitems(b'paths'):
# remove auth info from user defined url
noauthurl = urlutil.removeauth(url)
# Standardize on unix style paths, otherwise some {remotenames} end up
# being an absolute path on Windows.
url = util.pconvert(bytes(url))
noauthurl = util.pconvert(noauthurl)
if url == rpath or noauthurl == rpath:
rpath = path
break
return rpath
def pullremotenames(localrepo, remoterepo):
"""
pulls bookmarks and branches information of the remote repo during a
pull or clone operation.
localrepo is our local repository
remoterepo is the peer instance
"""
remotepath = activepath(localrepo, remoterepo)
with remoterepo.commandexecutor() as e:
bookmarks = e.callcommand(
b'listkeys',
{
b'namespace': b'bookmarks',
},
).result()
# on a push, we don't want to keep obsolete heads since
# they won't show up as heads on the next pull, so we
# remove them here otherwise we would require the user
# to issue a pull to refresh the storage
bmap = {}
repo = localrepo.unfiltered()
with remoterepo.commandexecutor() as e:
branchmap = e.callcommand(b'branchmap', {}).result()
for branch, nodes in branchmap.items():
bmap[branch] = []
for node in nodes:
if node in repo and not repo[node].obsolete():
bmap[branch].append(hex(node))
saveremotenames(localrepo, remotepath, bmap, bookmarks)