contrib/check-config.py
author Pierre-Yves David <pierre-yves.david@octobus.net>
Fri, 05 Apr 2024 11:05:54 +0200
changeset 51576 de5bf3fe0233
parent 48875 6000f5b25c9b
permissions -rwxr-xr-x
revset: stop serializing node when using "%ln" Turning hundred of thousand of node from node to hex and back can be slow… what about we stop doing it? In many case were we are using node id we should be using revision id. However this is not a good reason to have a stupidly slow implementation of "%ln". This caught my attention again because the phase discovery during push make an extensive use of "%ln" or huge set. In absolute, that phase discovery probably should use "%ld" and need to improves its algorithmic complexity, but improving "%ln" seems simple and long overdue. This greatly speeds up `hg push` on repository with many drafts. Here are some relevant poulpe benchmarks: ### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog # benchmark.name = hg.command.push # bin-env-vars.hg.flavor = default # bin-env-vars.hg.py-re2-module = default # benchmark.variants.explicit-rev = all-out-heads # benchmark.variants.issue6528 = disabled # benchmark.variants.protocol = ssh # benchmark.variants.reuse-external-delta-parent = default ## benchmark.variants.revs = any-1-extra-rev before: 44.235070 after: 20.416329 (-53.85%, -23.82) ## benchmark.variants.revs = any-100-extra-rev before: 49.234697 after: 26.519829 (-46.14%, -22.71) ### benchmark.name = hg.command.bundle # bin-env-vars.hg.flavor = default # bin-env-vars.hg.py-re2-module = default # benchmark.variants.revs = all # benchmark.variants.type = none-streamv2 ## data-env-vars.name = heptapod-public-2024-03-25-zstd-sparse-revlog before: 10.138396 after: 7.750458 (-23.55%, -2.39) ## data-env-vars.name = mercurial-public-2024-03-22-zstd-sparse-revlog before: 1.263859 after: 0.700229 (-44.60%, -0.56) ## data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog before: 399.484481 after: 346.5089 (-13.26%, -52.98) ## data-env-vars.name = pypy-2024-03-22-zstd-sparse-revlog before: 4.540080 after: 3.401700 (-25.07%, -1.14) ## data-env-vars.name = tryton-public-2024-03-22-zstd-sparse-revlog before: 2.975765 after: 1.870798 (-37.13%, -1.10)

#!/usr/bin/env python3
#
# check-config - a config flag documentation checker for Mercurial
#
# Copyright 2015 Olivia Mackall <olivia@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

import re
import sys

foundopts = {}
documented = {}
allowinconsistent = set()

configre = re.compile(
    br'''
    # Function call
    ui\.config(?P<ctype>|int|bool|list)\(
        # First argument.
        ['"](?P<section>\S+)['"],\s*
        # Second argument
        ['"](?P<option>\S+)['"](,\s+
        (?:default=)?(?P<default>\S+?))?
    \)''',
    re.VERBOSE | re.MULTILINE,
)

configwithre = re.compile(
    br'''
    ui\.config(?P<ctype>with)\(
        # First argument is callback function. This doesn't parse robustly
        # if it is e.g. a function call.
        [^,]+,\s*
        ['"](?P<section>\S+)['"],\s*
        ['"](?P<option>\S+)['"](,\s+
        (?:default=)?(?P<default>\S+?))?
    \)''',
    re.VERBOSE | re.MULTILINE,
)

configpartialre = br"""ui\.config"""

ignorere = re.compile(
    br'''
    \#\s(?P<reason>internal|experimental|deprecated|developer|inconsistent)\s
    config:\s(?P<config>\S+\.\S+)$
    ''',
    re.VERBOSE | re.MULTILINE,
)

if sys.version_info[0] > 2:

    def mkstr(b):
        if isinstance(b, str):
            return b
        return b.decode('utf8')


else:
    mkstr = lambda x: x


def main(args):
    for f in args:
        sect = b''
        prevname = b''
        confsect = b''
        carryover = b''
        linenum = 0
        for l in open(f, 'rb'):
            linenum += 1

            # check topic-like bits
            m = re.match(br'\s*``(\S+)``', l)
            if m:
                prevname = m.group(1)
            if re.match(br'^\s*-+$', l):
                sect = prevname
                prevname = b''

            if sect and prevname:
                name = sect + b'.' + prevname
                documented[name] = 1

            # check docstring bits
            m = re.match(br'^\s+\[(\S+)\]', l)
            if m:
                confsect = m.group(1)
                continue
            m = re.match(br'^\s+(?:#\s*)?(\S+) = ', l)
            if m:
                name = confsect + b'.' + m.group(1)
                documented[name] = 1

            # like the bugzilla extension
            m = re.match(br'^\s*(\S+\.\S+)$', l)
            if m:
                documented[m.group(1)] = 1

            # like convert
            m = re.match(br'^\s*:(\S+\.\S+):\s+', l)
            if m:
                documented[m.group(1)] = 1

            # quoted in help or docstrings
            m = re.match(br'.*?``(\S+\.\S+)``', l)
            if m:
                documented[m.group(1)] = 1

            # look for ignore markers
            m = ignorere.search(l)
            if m:
                if m.group('reason') == b'inconsistent':
                    allowinconsistent.add(m.group('config'))
                else:
                    documented[m.group('config')] = 1

            # look for code-like bits
            line = carryover + l
            m = configre.search(line) or configwithre.search(line)
            if m:
                ctype = m.group('ctype')
                if not ctype:
                    ctype = 'str'
                name = m.group('section') + b"." + m.group('option')
                default = m.group('default')
                if default in (
                    None,
                    b'False',
                    b'None',
                    b'0',
                    b'[]',
                    b'""',
                    b"''",
                ):
                    default = b''
                if re.match(b'[a-z.]+$', default):
                    default = b'<variable>'
                if (
                    name in foundopts
                    and (ctype, default) != foundopts[name]
                    and name not in allowinconsistent
                ):
                    print(mkstr(l.rstrip()))
                    fctype, fdefault = foundopts[name]
                    print(
                        "conflict on %s: %r != %r"
                        % (
                            mkstr(name),
                            (mkstr(ctype), mkstr(default)),
                            (mkstr(fctype), mkstr(fdefault)),
                        )
                    )
                    print("at %s:%d:" % (mkstr(f), linenum))
                foundopts[name] = (ctype, default)
                carryover = b''
            else:
                m = re.search(configpartialre, line)
                if m:
                    carryover = line
                else:
                    carryover = b''

    for name in sorted(foundopts):
        if name not in documented:
            if not (
                name.startswith(b"devel.")
                or name.startswith(b"experimental.")
                or name.startswith(b"debug.")
            ):
                ctype, default = foundopts[name]
                if default:
                    if isinstance(default, bytes):
                        default = mkstr(default)
                    default = ' [%s]' % default
                elif isinstance(default, bytes):
                    default = mkstr(default)
                print(
                    "undocumented: %s (%s)%s"
                    % (mkstr(name), mkstr(ctype), default)
                )


if __name__ == "__main__":
    if len(sys.argv) > 1:
        sys.exit(main(sys.argv[1:]))
    else:
        sys.exit(main([l.rstrip() for l in sys.stdin]))