templates: add filter to reverse list
The filter supports only lists because for lists, it’s straightforward to
implement. Reversing text doesn’t seem very useful and is hard to implement.
Reversing the bytes would break multi-bytes encodings. Reversing the code
points would break characters consisting of multiple code points. Reversing
graphemes is non-trivial without using a library not included in the standard
library.
# perf.py - performance test routines
'''helper extension to measure performance
Configurations
==============
``perf``
--------
``all-timing``
When set, additional statistics will be reported for each benchmark: best,
worst, median average. If not set only the best timing is reported
(default: off).
``presleep``
number of second to wait before any group of runs (default: 1)
``pre-run``
number of run to perform before starting measurement.
``profile-benchmark``
Enable profiling for the benchmarked section.
(The first iteration is benchmarked)
``run-limits``
Control the number of runs each benchmark will perform. The option value
should be a list of `<time>-<numberofrun>` pairs. After each run the
conditions are considered in order with the following logic:
If benchmark has been running for <time> seconds, and we have performed
<numberofrun> iterations, stop the benchmark,
The default value is: `3.0-100, 10.0-3`
``stub``
When set, benchmarks will only be run once, useful for testing
(default: off)
'''
# "historical portability" policy of perf.py:
#
# We have to do:
# - make perf.py "loadable" with as wide Mercurial version as possible
# This doesn't mean that perf commands work correctly with that Mercurial.
# BTW, perf.py itself has been available since 1.1 (or eb240755386d).
# - make historical perf command work correctly with as wide Mercurial
# version as possible
#
# We have to do, if possible with reasonable cost:
# - make recent perf command for historical feature work correctly
# with early Mercurial
#
# We don't have to do:
# - make perf command for recent feature work correctly with early
# Mercurial
import contextlib
import functools
import gc
import os
import random
import shutil
import struct
import sys
import tempfile
import threading
import time
import mercurial.revlog
from mercurial import (
changegroup,
cmdutil,
commands,
copies,
error,
extensions,
hg,
mdiff,
merge,
util,
)
# for "historical portability":
# try to import modules separately (in dict order), and ignore
# failure, because these aren't available with early Mercurial
try:
from mercurial import branchmap # since 2.5 (or bcee63733aad)
except ImportError:
pass
try:
from mercurial import obsolete # since 2.3 (or ad0d6c2b3279)
except ImportError:
pass
try:
from mercurial import registrar # since 3.7 (or 37d50250b696)
dir(registrar) # forcibly load it
except ImportError:
registrar = None
try:
from mercurial import repoview # since 2.5 (or 3a6ddacb7198)
except ImportError:
pass
try:
from mercurial.utils import repoviewutil # since 5.0
except ImportError:
repoviewutil = None
try:
from mercurial import scmutil # since 1.9 (or 8b252e826c68)
except ImportError:
pass
try:
from mercurial import setdiscovery # since 1.9 (or cb98fed52495)
except ImportError:
pass
try:
from mercurial import profiling
except ImportError:
profiling = None
try:
from mercurial.revlogutils import constants as revlog_constants
perf_rl_kind = (revlog_constants.KIND_OTHER, b'created-by-perf')
def revlog(opener, *args, **kwargs):
return mercurial.revlog.revlog(opener, perf_rl_kind, *args, **kwargs)
except (ImportError, AttributeError):
perf_rl_kind = None
def revlog(opener, *args, **kwargs):
return mercurial.revlog.revlog(opener, *args, **kwargs)
def identity(a):
return a
try:
from mercurial import pycompat
getargspec = pycompat.getargspec # added to module after 4.5
_byteskwargs = pycompat.byteskwargs # since 4.1 (or fbc3f73dc802)
_sysstr = pycompat.sysstr # since 4.0 (or 2219f4f82ede)
_bytestr = pycompat.bytestr # since 4.2 (or b70407bd84d5)
_xrange = pycompat.xrange # since 4.8 (or 7eba8f83129b)
fsencode = pycompat.fsencode # since 3.9 (or f4a5e0e86a7e)
if pycompat.ispy3:
_maxint = sys.maxsize # per py3 docs for replacing maxint
else:
_maxint = sys.maxint
except (NameError, ImportError, AttributeError):
import inspect
getargspec = inspect.getargspec
_byteskwargs = identity
_bytestr = str
fsencode = identity # no py3 support
_maxint = sys.maxint # no py3 support
_sysstr = lambda x: x # no py3 support
_xrange = xrange
try:
# 4.7+
queue = pycompat.queue.Queue
except (NameError, AttributeError, ImportError):
# <4.7.
try:
queue = pycompat.queue
except (NameError, AttributeError, ImportError):
import Queue as queue
try:
from mercurial import logcmdutil
makelogtemplater = logcmdutil.maketemplater
except (AttributeError, ImportError):
try:
makelogtemplater = cmdutil.makelogtemplater
except (AttributeError, ImportError):
makelogtemplater = None
# for "historical portability":
# define util.safehasattr forcibly, because util.safehasattr has been
# available since 1.9.3 (or 94b200a11cf7)
_undefined = object()
def safehasattr(thing, attr):
return getattr(thing, _sysstr(attr), _undefined) is not _undefined
setattr(util, 'safehasattr', safehasattr)
# for "historical portability":
# define util.timer forcibly, because util.timer has been available
# since ae5d60bb70c9
if safehasattr(time, 'perf_counter'):
util.timer = time.perf_counter
elif os.name == b'nt':
util.timer = time.clock
else:
util.timer = time.time
# for "historical portability":
# use locally defined empty option list, if formatteropts isn't
# available, because commands.formatteropts has been available since
# 3.2 (or 7a7eed5176a4), even though formatting itself has been
# available since 2.2 (or ae5f92e154d3)
formatteropts = getattr(
cmdutil, "formatteropts", getattr(commands, "formatteropts", [])
)
# for "historical portability":
# use locally defined option list, if debugrevlogopts isn't available,
# because commands.debugrevlogopts has been available since 3.7 (or
# 5606f7d0d063), even though cmdutil.openrevlog() has been available
# since 1.9 (or a79fea6b3e77).
revlogopts = getattr(
cmdutil,
"debugrevlogopts",
getattr(
commands,
"debugrevlogopts",
[
(b'c', b'changelog', False, b'open changelog'),
(b'm', b'manifest', False, b'open manifest'),
(b'', b'dir', False, b'open directory manifest'),
],
),
)
cmdtable = {}
# for "historical portability":
# define parsealiases locally, because cmdutil.parsealiases has been
# available since 1.5 (or 6252852b4332)
def parsealiases(cmd):
return cmd.split(b"|")
if safehasattr(registrar, 'command'):
command = registrar.command(cmdtable)
elif safehasattr(cmdutil, 'command'):
command = cmdutil.command(cmdtable)
if 'norepo' not in getargspec(command).args:
# for "historical portability":
# wrap original cmdutil.command, because "norepo" option has
# been available since 3.1 (or 75a96326cecb)
_command = command
def command(name, options=(), synopsis=None, norepo=False):
if norepo:
commands.norepo += b' %s' % b' '.join(parsealiases(name))
return _command(name, list(options), synopsis)
else:
# for "historical portability":
# define "@command" annotation locally, because cmdutil.command
# has been available since 1.9 (or 2daa5179e73f)
def command(name, options=(), synopsis=None, norepo=False):
def decorator(func):
if synopsis:
cmdtable[name] = func, list(options), synopsis
else:
cmdtable[name] = func, list(options)
if norepo:
commands.norepo += b' %s' % b' '.join(parsealiases(name))
return func
return decorator
try:
import mercurial.registrar
import mercurial.configitems
configtable = {}
configitem = mercurial.registrar.configitem(configtable)
configitem(
b'perf',
b'presleep',
default=mercurial.configitems.dynamicdefault,
experimental=True,
)
configitem(
b'perf',
b'stub',
default=mercurial.configitems.dynamicdefault,
experimental=True,
)
configitem(
b'perf',
b'parentscount',
default=mercurial.configitems.dynamicdefault,
experimental=True,
)
configitem(
b'perf',
b'all-timing',
default=mercurial.configitems.dynamicdefault,
experimental=True,
)
configitem(
b'perf',
b'pre-run',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'profile-benchmark',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'run-limits',
default=mercurial.configitems.dynamicdefault,
experimental=True,
)
except (ImportError, AttributeError):
pass
except TypeError:
# compatibility fix for a11fd395e83f
# hg version: 5.2
configitem(
b'perf',
b'presleep',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'stub',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'parentscount',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'all-timing',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'pre-run',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'profile-benchmark',
default=mercurial.configitems.dynamicdefault,
)
configitem(
b'perf',
b'run-limits',
default=mercurial.configitems.dynamicdefault,
)
def getlen(ui):
if ui.configbool(b"perf", b"stub", False):
return lambda x: 1
return len
class noop:
"""dummy context manager"""
def __enter__(self):
pass
def __exit__(self, *args):
pass
NOOPCTX = noop()
def gettimer(ui, opts=None):
"""return a timer function and formatter: (timer, formatter)
This function exists to gather the creation of formatter in a single
place instead of duplicating it in all performance commands."""
# enforce an idle period before execution to counteract power management
# experimental config: perf.presleep
time.sleep(getint(ui, b"perf", b"presleep", 1))
if opts is None:
opts = {}
# redirect all to stderr unless buffer api is in use
if not ui._buffers:
ui = ui.copy()
uifout = safeattrsetter(ui, b'fout', ignoremissing=True)
if uifout:
# for "historical portability":
# ui.fout/ferr have been available since 1.9 (or 4e1ccd4c2b6d)
uifout.set(ui.ferr)
# get a formatter
uiformatter = getattr(ui, 'formatter', None)
if uiformatter:
fm = uiformatter(b'perf', opts)
else:
# for "historical portability":
# define formatter locally, because ui.formatter has been
# available since 2.2 (or ae5f92e154d3)
from mercurial import node
class defaultformatter:
"""Minimized composition of baseformatter and plainformatter"""
def __init__(self, ui, topic, opts):
self._ui = ui
if ui.debugflag:
self.hexfunc = node.hex
else:
self.hexfunc = node.short
def __nonzero__(self):
return False
__bool__ = __nonzero__
def startitem(self):
pass
def data(self, **data):
pass
def write(self, fields, deftext, *fielddata, **opts):
self._ui.write(deftext % fielddata, **opts)
def condwrite(self, cond, fields, deftext, *fielddata, **opts):
if cond:
self._ui.write(deftext % fielddata, **opts)
def plain(self, text, **opts):
self._ui.write(text, **opts)
def end(self):
pass
fm = defaultformatter(ui, b'perf', opts)
# stub function, runs code only once instead of in a loop
# experimental config: perf.stub
if ui.configbool(b"perf", b"stub", False):
return functools.partial(stub_timer, fm), fm
# experimental config: perf.all-timing
displayall = ui.configbool(b"perf", b"all-timing", False)
# experimental config: perf.run-limits
limitspec = ui.configlist(b"perf", b"run-limits", [])
limits = []
for item in limitspec:
parts = item.split(b'-', 1)
if len(parts) < 2:
ui.warn((b'malformatted run limit entry, missing "-": %s\n' % item))
continue
try:
time_limit = float(_sysstr(parts[0]))
except ValueError as e:
ui.warn(
(
b'malformatted run limit entry, %s: %s\n'
% (_bytestr(e), item)
)
)
continue
try:
run_limit = int(_sysstr(parts[1]))
except ValueError as e:
ui.warn(
(
b'malformatted run limit entry, %s: %s\n'
% (_bytestr(e), item)
)
)
continue
limits.append((time_limit, run_limit))
if not limits:
limits = DEFAULTLIMITS
profiler = None
if profiling is not None:
if ui.configbool(b"perf", b"profile-benchmark", False):
profiler = profiling.profile(ui)
prerun = getint(ui, b"perf", b"pre-run", 0)
t = functools.partial(
_timer,
fm,
displayall=displayall,
limits=limits,
prerun=prerun,
profiler=profiler,
)
return t, fm
def stub_timer(fm, func, setup=None, title=None):
if setup is not None:
setup()
func()
@contextlib.contextmanager
def timeone():
r = []
ostart = os.times()
cstart = util.timer()
yield r
cstop = util.timer()
ostop = os.times()
a, b = ostart, ostop
r.append((cstop - cstart, b[0] - a[0], b[1] - a[1]))
# list of stop condition (elapsed time, minimal run count)
DEFAULTLIMITS = (
(3.0, 100),
(10.0, 3),
)
def _timer(
fm,
func,
setup=None,
title=None,
displayall=False,
limits=DEFAULTLIMITS,
prerun=0,
profiler=None,
):
gc.collect()
results = []
begin = util.timer()
count = 0
if profiler is None:
profiler = NOOPCTX
for i in range(prerun):
if setup is not None:
setup()
func()
keepgoing = True
while keepgoing:
if setup is not None:
setup()
with profiler:
with timeone() as item:
r = func()
profiler = NOOPCTX
count += 1
results.append(item[0])
cstop = util.timer()
# Look for a stop condition.
elapsed = cstop - begin
for t, mincount in limits:
if elapsed >= t and count >= mincount:
keepgoing = False
break
formatone(fm, results, title=title, result=r, displayall=displayall)
def formatone(fm, timings, title=None, result=None, displayall=False):
count = len(timings)
fm.startitem()
if title:
fm.write(b'title', b'! %s\n', title)
if result:
fm.write(b'result', b'! result: %s\n', result)
def display(role, entry):
prefix = b''
if role != b'best':
prefix = b'%s.' % role
fm.plain(b'!')
fm.write(prefix + b'wall', b' wall %f', entry[0])
fm.write(prefix + b'comb', b' comb %f', entry[1] + entry[2])
fm.write(prefix + b'user', b' user %f', entry[1])
fm.write(prefix + b'sys', b' sys %f', entry[2])
fm.write(prefix + b'count', b' (%s of %%d)' % role, count)
fm.plain(b'\n')
timings.sort()
min_val = timings[0]
display(b'best', min_val)
if displayall:
max_val = timings[-1]
display(b'max', max_val)
avg = tuple([sum(x) / count for x in zip(*timings)])
display(b'avg', avg)
median = timings[len(timings) // 2]
display(b'median', median)
# utilities for historical portability
def getint(ui, section, name, default):
# for "historical portability":
# ui.configint has been available since 1.9 (or fa2b596db182)
v = ui.config(section, name, None)
if v is None:
return default
try:
return int(v)
except ValueError:
raise error.ConfigError(
b"%s.%s is not an integer ('%s')" % (section, name, v)
)
def safeattrsetter(obj, name, ignoremissing=False):
"""Ensure that 'obj' has 'name' attribute before subsequent setattr
This function is aborted, if 'obj' doesn't have 'name' attribute
at runtime. This avoids overlooking removal of an attribute, which
breaks assumption of performance measurement, in the future.
This function returns the object to (1) assign a new value, and
(2) restore an original value to the attribute.
If 'ignoremissing' is true, missing 'name' attribute doesn't cause
abortion, and this function returns None. This is useful to
examine an attribute, which isn't ensured in all Mercurial
versions.
"""
if not util.safehasattr(obj, name):
if ignoremissing:
return None
raise error.Abort(
(
b"missing attribute %s of %s might break assumption"
b" of performance measurement"
)
% (name, obj)
)
origvalue = getattr(obj, _sysstr(name))
class attrutil:
def set(self, newvalue):
setattr(obj, _sysstr(name), newvalue)
def restore(self):
setattr(obj, _sysstr(name), origvalue)
return attrutil()
# utilities to examine each internal API changes
def getbranchmapsubsettable():
# for "historical portability":
# subsettable is defined in:
# - branchmap since 2.9 (or 175c6fd8cacc)
# - repoview since 2.5 (or 59a9f18d4587)
# - repoviewutil since 5.0
for mod in (branchmap, repoview, repoviewutil):
subsettable = getattr(mod, 'subsettable', None)
if subsettable:
return subsettable
# bisecting in bcee63733aad::59a9f18d4587 can reach here (both
# branchmap and repoview modules exist, but subsettable attribute
# doesn't)
raise error.Abort(
b"perfbranchmap not available with this Mercurial",
hint=b"use 2.5 or later",
)
def getsvfs(repo):
"""Return appropriate object to access files under .hg/store"""
# for "historical portability":
# repo.svfs has been available since 2.3 (or 7034365089bf)
svfs = getattr(repo, 'svfs', None)
if svfs:
return svfs
else:
return getattr(repo, 'sopener')
def getvfs(repo):
"""Return appropriate object to access files under .hg"""
# for "historical portability":
# repo.vfs has been available since 2.3 (or 7034365089bf)
vfs = getattr(repo, 'vfs', None)
if vfs:
return vfs
else:
return getattr(repo, 'opener')
def repocleartagscachefunc(repo):
"""Return the function to clear tags cache according to repo internal API"""
if util.safehasattr(repo, b'_tagscache'): # since 2.0 (or 9dca7653b525)
# in this case, setattr(repo, '_tagscache', None) or so isn't
# correct way to clear tags cache, because existing code paths
# expect _tagscache to be a structured object.
def clearcache():
# _tagscache has been filteredpropertycache since 2.5 (or
# 98c867ac1330), and delattr() can't work in such case
if '_tagscache' in vars(repo):
del repo.__dict__['_tagscache']
return clearcache
repotags = safeattrsetter(repo, b'_tags', ignoremissing=True)
if repotags: # since 1.4 (or 5614a628d173)
return lambda: repotags.set(None)
repotagscache = safeattrsetter(repo, b'tagscache', ignoremissing=True)
if repotagscache: # since 0.6 (or d7df759d0e97)
return lambda: repotagscache.set(None)
# Mercurial earlier than 0.6 (or d7df759d0e97) logically reaches
# this point, but it isn't so problematic, because:
# - repo.tags of such Mercurial isn't "callable", and repo.tags()
# in perftags() causes failure soon
# - perf.py itself has been available since 1.1 (or eb240755386d)
raise error.Abort(b"tags API of this hg command is unknown")
# utilities to clear cache
def clearfilecache(obj, attrname):
unfiltered = getattr(obj, 'unfiltered', None)
if unfiltered is not None:
obj = obj.unfiltered()
if attrname in vars(obj):
delattr(obj, attrname)
obj._filecache.pop(attrname, None)
def clearchangelog(repo):
if repo is not repo.unfiltered():
object.__setattr__(repo, '_clcachekey', None)
object.__setattr__(repo, '_clcache', None)
clearfilecache(repo.unfiltered(), 'changelog')
# perf commands
@command(b'perf::walk|perfwalk', formatteropts)
def perfwalk(ui, repo, *pats, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
m = scmutil.match(repo[None], pats, {})
timer(
lambda: len(
list(
repo.dirstate.walk(m, subrepos=[], unknown=True, ignored=False)
)
)
)
fm.end()
@command(b'perf::annotate|perfannotate', formatteropts)
def perfannotate(ui, repo, f, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
fc = repo[b'.'][f]
timer(lambda: len(fc.annotate(True)))
fm.end()
@command(
b'perf::status|perfstatus',
[
(b'u', b'unknown', False, b'ask status to look for unknown files'),
(b'', b'dirstate', False, b'benchmark the internal dirstate call'),
]
+ formatteropts,
)
def perfstatus(ui, repo, **opts):
"""benchmark the performance of a single status call
The repository data are preserved between each call.
By default, only the status of the tracked file are requested. If
`--unknown` is passed, the "unknown" files are also tracked.
"""
opts = _byteskwargs(opts)
# m = match.always(repo.root, repo.getcwd())
# timer(lambda: sum(map(len, repo.dirstate.status(m, [], False, False,
# False))))
timer, fm = gettimer(ui, opts)
if opts[b'dirstate']:
dirstate = repo.dirstate
m = scmutil.matchall(repo)
unknown = opts[b'unknown']
def status_dirstate():
s = dirstate.status(
m, subrepos=[], ignored=False, clean=False, unknown=unknown
)
sum(map(bool, s))
timer(status_dirstate)
else:
timer(lambda: sum(map(len, repo.status(unknown=opts[b'unknown']))))
fm.end()
@command(b'perf::addremove|perfaddremove', formatteropts)
def perfaddremove(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
try:
oldquiet = repo.ui.quiet
repo.ui.quiet = True
matcher = scmutil.match(repo[None])
opts[b'dry_run'] = True
if 'uipathfn' in getargspec(scmutil.addremove).args:
uipathfn = scmutil.getuipathfn(repo)
timer(lambda: scmutil.addremove(repo, matcher, b"", uipathfn, opts))
else:
timer(lambda: scmutil.addremove(repo, matcher, b"", opts))
finally:
repo.ui.quiet = oldquiet
fm.end()
def clearcaches(cl):
# behave somewhat consistently across internal API changes
if util.safehasattr(cl, b'clearcaches'):
cl.clearcaches()
elif util.safehasattr(cl, b'_nodecache'):
# <= hg-5.2
from mercurial.node import nullid, nullrev
cl._nodecache = {nullid: nullrev}
cl._nodepos = None
@command(b'perf::heads|perfheads', formatteropts)
def perfheads(ui, repo, **opts):
"""benchmark the computation of a changelog heads"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
cl = repo.changelog
def s():
clearcaches(cl)
def d():
len(cl.headrevs())
timer(d, setup=s)
fm.end()
@command(
b'perf::tags|perftags',
formatteropts
+ [
(b'', b'clear-revlogs', False, b'refresh changelog and manifest'),
],
)
def perftags(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
repocleartagscache = repocleartagscachefunc(repo)
clearrevlogs = opts[b'clear_revlogs']
def s():
if clearrevlogs:
clearchangelog(repo)
clearfilecache(repo.unfiltered(), 'manifest')
repocleartagscache()
def t():
return len(repo.tags())
timer(t, setup=s)
fm.end()
@command(b'perf::ancestors|perfancestors', formatteropts)
def perfancestors(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
heads = repo.changelog.headrevs()
def d():
for a in repo.changelog.ancestors(heads):
pass
timer(d)
fm.end()
@command(b'perf::ancestorset|perfancestorset', formatteropts)
def perfancestorset(ui, repo, revset, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
revs = repo.revs(revset)
heads = repo.changelog.headrevs()
def d():
s = repo.changelog.ancestors(heads)
for rev in revs:
rev in s
timer(d)
fm.end()
@command(
b'perf::delta-find',
revlogopts + formatteropts,
b'-c|-m|FILE REV',
)
def perf_delta_find(ui, repo, arg_1, arg_2=None, **opts):
"""benchmark the process of finding a valid delta for a revlog revision
When a revlog receives a new revision (e.g. from a commit, or from an
incoming bundle), it searches for a suitable delta-base to produce a delta.
This perf command measures how much time we spend in this process. It
operates on an already stored revision.
See `hg help debug-delta-find` for another related command.
"""
from mercurial import revlogutils
import mercurial.revlogutils.deltas as deltautil
opts = _byteskwargs(opts)
if arg_2 is None:
file_ = None
rev = arg_1
else:
file_ = arg_1
rev = arg_2
repo = repo.unfiltered()
timer, fm = gettimer(ui, opts)
rev = int(rev)
revlog = cmdutil.openrevlog(repo, b'perf::delta-find', file_, opts)
deltacomputer = deltautil.deltacomputer(revlog)
node = revlog.node(rev)
p1r, p2r = revlog.parentrevs(rev)
p1 = revlog.node(p1r)
p2 = revlog.node(p2r)
full_text = revlog.revision(rev)
textlen = len(full_text)
cachedelta = None
flags = revlog.flags(rev)
revinfo = revlogutils.revisioninfo(
node,
p1,
p2,
[full_text], # btext
textlen,
cachedelta,
flags,
)
# Note: we should probably purge the potential caches (like the full
# manifest cache) between runs.
def find_one():
with revlog._datafp() as fh:
deltacomputer.finddeltainfo(revinfo, fh, target_rev=rev)
timer(find_one)
fm.end()
@command(b'perf::discovery|perfdiscovery', formatteropts, b'PATH')
def perfdiscovery(ui, repo, path, **opts):
"""benchmark discovery between local repo and the peer at given path"""
repos = [repo, None]
timer, fm = gettimer(ui, opts)
try:
from mercurial.utils.urlutil import get_unique_pull_path
path = get_unique_pull_path(b'perfdiscovery', repo, ui, path)[0]
except ImportError:
path = ui.expandpath(path)
def s():
repos[1] = hg.peer(ui, opts, path)
def d():
setdiscovery.findcommonheads(ui, *repos)
timer(d, setup=s)
fm.end()
@command(
b'perf::bookmarks|perfbookmarks',
formatteropts
+ [
(b'', b'clear-revlogs', False, b'refresh changelog and manifest'),
],
)
def perfbookmarks(ui, repo, **opts):
"""benchmark parsing bookmarks from disk to memory"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
clearrevlogs = opts[b'clear_revlogs']
def s():
if clearrevlogs:
clearchangelog(repo)
clearfilecache(repo, b'_bookmarks')
def d():
repo._bookmarks
timer(d, setup=s)
fm.end()
@command(
b'perf::bundle',
[
(
b'r',
b'rev',
[],
b'changesets to bundle',
b'REV',
),
(
b't',
b'type',
b'none',
b'bundlespec to use (see `hg help bundlespec`)',
b'TYPE',
),
]
+ formatteropts,
b'REVS',
)
def perfbundle(ui, repo, *revs, **opts):
"""benchmark the creation of a bundle from a repository
For now, this only supports "none" compression.
"""
try:
from mercurial import bundlecaches
parsebundlespec = bundlecaches.parsebundlespec
except ImportError:
from mercurial import exchange
parsebundlespec = exchange.parsebundlespec
from mercurial import discovery
from mercurial import bundle2
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
cl = repo.changelog
revs = list(revs)
revs.extend(opts.get(b'rev', ()))
revs = scmutil.revrange(repo, revs)
if not revs:
raise error.Abort(b"not revision specified")
# make it a consistent set (ie: without topological gaps)
old_len = len(revs)
revs = list(repo.revs(b"%ld::%ld", revs, revs))
if old_len != len(revs):
new_count = len(revs) - old_len
msg = b"add %d new revisions to make it a consistent set\n"
ui.write_err(msg % new_count)
targets = [cl.node(r) for r in repo.revs(b"heads(::%ld)", revs)]
bases = [cl.node(r) for r in repo.revs(b"heads(::%ld - %ld)", revs, revs)]
outgoing = discovery.outgoing(repo, bases, targets)
bundle_spec = opts.get(b'type')
bundle_spec = parsebundlespec(repo, bundle_spec, strict=False)
cgversion = bundle_spec.params.get(b"cg.version")
if cgversion is None:
if bundle_spec.version == b'v1':
cgversion = b'01'
if bundle_spec.version == b'v2':
cgversion = b'02'
if cgversion not in changegroup.supportedoutgoingversions(repo):
err = b"repository does not support bundle version %s"
raise error.Abort(err % cgversion)
if cgversion == b'01': # bundle1
bversion = b'HG10' + bundle_spec.wirecompression
bcompression = None
elif cgversion in (b'02', b'03'):
bversion = b'HG20'
bcompression = bundle_spec.wirecompression
else:
err = b'perf::bundle: unexpected changegroup version %s'
raise error.ProgrammingError(err % cgversion)
if bcompression is None:
bcompression = b'UN'
if bcompression != b'UN':
err = b'perf::bundle: compression currently unsupported: %s'
raise error.ProgrammingError(err % bcompression)
def do_bundle():
bundle2.writenewbundle(
ui,
repo,
b'perf::bundle',
os.devnull,
bversion,
outgoing,
bundle_spec.params,
)
timer(do_bundle)
fm.end()
@command(b'perf::bundleread|perfbundleread', formatteropts, b'BUNDLE')
def perfbundleread(ui, repo, bundlepath, **opts):
"""Benchmark reading of bundle files.
This command is meant to isolate the I/O part of bundle reading as
much as possible.
"""
from mercurial import (
bundle2,
exchange,
streamclone,
)
opts = _byteskwargs(opts)
def makebench(fn):
def run():
with open(bundlepath, b'rb') as fh:
bundle = exchange.readbundle(ui, fh, bundlepath)
fn(bundle)
return run
def makereadnbytes(size):
def run():
with open(bundlepath, b'rb') as fh:
bundle = exchange.readbundle(ui, fh, bundlepath)
while bundle.read(size):
pass
return run
def makestdioread(size):
def run():
with open(bundlepath, b'rb') as fh:
while fh.read(size):
pass
return run
# bundle1
def deltaiter(bundle):
for delta in bundle.deltaiter():
pass
def iterchunks(bundle):
for chunk in bundle.getchunks():
pass
# bundle2
def forwardchunks(bundle):
for chunk in bundle._forwardchunks():
pass
def iterparts(bundle):
for part in bundle.iterparts():
pass
def iterpartsseekable(bundle):
for part in bundle.iterparts(seekable=True):
pass
def seek(bundle):
for part in bundle.iterparts(seekable=True):
part.seek(0, os.SEEK_END)
def makepartreadnbytes(size):
def run():
with open(bundlepath, b'rb') as fh:
bundle = exchange.readbundle(ui, fh, bundlepath)
for part in bundle.iterparts():
while part.read(size):
pass
return run
benches = [
(makestdioread(8192), b'read(8k)'),
(makestdioread(16384), b'read(16k)'),
(makestdioread(32768), b'read(32k)'),
(makestdioread(131072), b'read(128k)'),
]
with open(bundlepath, b'rb') as fh:
bundle = exchange.readbundle(ui, fh, bundlepath)
if isinstance(bundle, changegroup.cg1unpacker):
benches.extend(
[
(makebench(deltaiter), b'cg1 deltaiter()'),
(makebench(iterchunks), b'cg1 getchunks()'),
(makereadnbytes(8192), b'cg1 read(8k)'),
(makereadnbytes(16384), b'cg1 read(16k)'),
(makereadnbytes(32768), b'cg1 read(32k)'),
(makereadnbytes(131072), b'cg1 read(128k)'),
]
)
elif isinstance(bundle, bundle2.unbundle20):
benches.extend(
[
(makebench(forwardchunks), b'bundle2 forwardchunks()'),
(makebench(iterparts), b'bundle2 iterparts()'),
(
makebench(iterpartsseekable),
b'bundle2 iterparts() seekable',
),
(makebench(seek), b'bundle2 part seek()'),
(makepartreadnbytes(8192), b'bundle2 part read(8k)'),
(makepartreadnbytes(16384), b'bundle2 part read(16k)'),
(makepartreadnbytes(32768), b'bundle2 part read(32k)'),
(makepartreadnbytes(131072), b'bundle2 part read(128k)'),
]
)
elif isinstance(bundle, streamclone.streamcloneapplier):
raise error.Abort(b'stream clone bundles not supported')
else:
raise error.Abort(b'unhandled bundle type: %s' % type(bundle))
for fn, title in benches:
timer, fm = gettimer(ui, opts)
timer(fn, title=title)
fm.end()
@command(
b'perf::changegroupchangelog|perfchangegroupchangelog',
formatteropts
+ [
(b'', b'cgversion', b'02', b'changegroup version'),
(b'r', b'rev', b'', b'revisions to add to changegroup'),
],
)
def perfchangegroupchangelog(ui, repo, cgversion=b'02', rev=None, **opts):
"""Benchmark producing a changelog group for a changegroup.
This measures the time spent processing the changelog during a
bundle operation. This occurs during `hg bundle` and on a server
processing a `getbundle` wire protocol request (handles clones
and pull requests).
By default, all revisions are added to the changegroup.
"""
opts = _byteskwargs(opts)
cl = repo.changelog
nodes = [cl.lookup(r) for r in repo.revs(rev or b'all()')]
bundler = changegroup.getbundler(cgversion, repo)
def d():
state, chunks = bundler._generatechangelog(cl, nodes)
for chunk in chunks:
pass
timer, fm = gettimer(ui, opts)
# Terminal printing can interfere with timing. So disable it.
with ui.configoverride({(b'progress', b'disable'): True}):
timer(d)
fm.end()
@command(b'perf::dirs|perfdirs', formatteropts)
def perfdirs(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
dirstate = repo.dirstate
b'a' in dirstate
def d():
dirstate.hasdir(b'a')
try:
del dirstate._map._dirs
except AttributeError:
pass
timer(d)
fm.end()
@command(
b'perf::dirstate|perfdirstate',
[
(
b'',
b'iteration',
None,
b'benchmark a full iteration for the dirstate',
),
(
b'',
b'contains',
None,
b'benchmark a large amount of `nf in dirstate` calls',
),
]
+ formatteropts,
)
def perfdirstate(ui, repo, **opts):
"""benchmap the time of various distate operations
By default benchmark the time necessary to load a dirstate from scratch.
The dirstate is loaded to the point were a "contains" request can be
answered.
"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
b"a" in repo.dirstate
if opts[b'iteration'] and opts[b'contains']:
msg = b'only specify one of --iteration or --contains'
raise error.Abort(msg)
if opts[b'iteration']:
setup = None
dirstate = repo.dirstate
def d():
for f in dirstate:
pass
elif opts[b'contains']:
setup = None
dirstate = repo.dirstate
allfiles = list(dirstate)
# also add file path that will be "missing" from the dirstate
allfiles.extend([f[::-1] for f in allfiles])
def d():
for f in allfiles:
f in dirstate
else:
def setup():
repo.dirstate.invalidate()
def d():
b"a" in repo.dirstate
timer(d, setup=setup)
fm.end()
@command(b'perf::dirstatedirs|perfdirstatedirs', formatteropts)
def perfdirstatedirs(ui, repo, **opts):
"""benchmap a 'dirstate.hasdir' call from an empty `dirs` cache"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
repo.dirstate.hasdir(b"a")
def setup():
try:
del repo.dirstate._map._dirs
except AttributeError:
pass
def d():
repo.dirstate.hasdir(b"a")
timer(d, setup=setup)
fm.end()
@command(b'perf::dirstatefoldmap|perfdirstatefoldmap', formatteropts)
def perfdirstatefoldmap(ui, repo, **opts):
"""benchmap a `dirstate._map.filefoldmap.get()` request
The dirstate filefoldmap cache is dropped between every request.
"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
dirstate = repo.dirstate
dirstate._map.filefoldmap.get(b'a')
def setup():
del dirstate._map.filefoldmap
def d():
dirstate._map.filefoldmap.get(b'a')
timer(d, setup=setup)
fm.end()
@command(b'perf::dirfoldmap|perfdirfoldmap', formatteropts)
def perfdirfoldmap(ui, repo, **opts):
"""benchmap a `dirstate._map.dirfoldmap.get()` request
The dirstate dirfoldmap cache is dropped between every request.
"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
dirstate = repo.dirstate
dirstate._map.dirfoldmap.get(b'a')
def setup():
del dirstate._map.dirfoldmap
try:
del dirstate._map._dirs
except AttributeError:
pass
def d():
dirstate._map.dirfoldmap.get(b'a')
timer(d, setup=setup)
fm.end()
@command(b'perf::dirstatewrite|perfdirstatewrite', formatteropts)
def perfdirstatewrite(ui, repo, **opts):
"""benchmap the time it take to write a dirstate on disk"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
ds = repo.dirstate
b"a" in ds
def setup():
ds._dirty = True
def d():
ds.write(repo.currenttransaction())
timer(d, setup=setup)
fm.end()
def _getmergerevs(repo, opts):
"""parse command argument to return rev involved in merge
input: options dictionnary with `rev`, `from` and `bse`
output: (localctx, otherctx, basectx)
"""
if opts[b'from']:
fromrev = scmutil.revsingle(repo, opts[b'from'])
wctx = repo[fromrev]
else:
wctx = repo[None]
# we don't want working dir files to be stat'd in the benchmark, so
# prime that cache
wctx.dirty()
rctx = scmutil.revsingle(repo, opts[b'rev'], opts[b'rev'])
if opts[b'base']:
fromrev = scmutil.revsingle(repo, opts[b'base'])
ancestor = repo[fromrev]
else:
ancestor = wctx.ancestor(rctx)
return (wctx, rctx, ancestor)
@command(
b'perf::mergecalculate|perfmergecalculate',
[
(b'r', b'rev', b'.', b'rev to merge against'),
(b'', b'from', b'', b'rev to merge from'),
(b'', b'base', b'', b'the revision to use as base'),
]
+ formatteropts,
)
def perfmergecalculate(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
wctx, rctx, ancestor = _getmergerevs(repo, opts)
def d():
# acceptremote is True because we don't want prompts in the middle of
# our benchmark
merge.calculateupdates(
repo,
wctx,
rctx,
[ancestor],
branchmerge=False,
force=False,
acceptremote=True,
followcopies=True,
)
timer(d)
fm.end()
@command(
b'perf::mergecopies|perfmergecopies',
[
(b'r', b'rev', b'.', b'rev to merge against'),
(b'', b'from', b'', b'rev to merge from'),
(b'', b'base', b'', b'the revision to use as base'),
]
+ formatteropts,
)
def perfmergecopies(ui, repo, **opts):
"""measure runtime of `copies.mergecopies`"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
wctx, rctx, ancestor = _getmergerevs(repo, opts)
def d():
# acceptremote is True because we don't want prompts in the middle of
# our benchmark
copies.mergecopies(repo, wctx, rctx, ancestor)
timer(d)
fm.end()
@command(b'perf::pathcopies|perfpathcopies', [], b"REV REV")
def perfpathcopies(ui, repo, rev1, rev2, **opts):
"""benchmark the copy tracing logic"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
ctx1 = scmutil.revsingle(repo, rev1, rev1)
ctx2 = scmutil.revsingle(repo, rev2, rev2)
def d():
copies.pathcopies(ctx1, ctx2)
timer(d)
fm.end()
@command(
b'perf::phases|perfphases',
[
(b'', b'full', False, b'include file reading time too'),
],
b"",
)
def perfphases(ui, repo, **opts):
"""benchmark phasesets computation"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
_phases = repo._phasecache
full = opts.get(b'full')
def d():
phases = _phases
if full:
clearfilecache(repo, b'_phasecache')
phases = repo._phasecache
phases.invalidate()
phases.loadphaserevs(repo)
timer(d)
fm.end()
@command(b'perf::phasesremote|perfphasesremote', [], b"[DEST]")
def perfphasesremote(ui, repo, dest=None, **opts):
"""benchmark time needed to analyse phases of the remote server"""
from mercurial.node import bin
from mercurial import (
exchange,
hg,
phases,
)
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
path = ui.getpath(dest, default=(b'default-push', b'default'))
if not path:
raise error.Abort(
b'default repository not configured!',
hint=b"see 'hg help config.paths'",
)
dest = path.pushloc or path.loc
ui.statusnoi18n(b'analysing phase of %s\n' % util.hidepassword(dest))
other = hg.peer(repo, opts, dest)
# easier to perform discovery through the operation
op = exchange.pushoperation(repo, other)
exchange._pushdiscoverychangeset(op)
remotesubset = op.fallbackheads
with other.commandexecutor() as e:
remotephases = e.callcommand(
b'listkeys', {b'namespace': b'phases'}
).result()
del other
publishing = remotephases.get(b'publishing', False)
if publishing:
ui.statusnoi18n(b'publishing: yes\n')
else:
ui.statusnoi18n(b'publishing: no\n')
has_node = getattr(repo.changelog.index, 'has_node', None)
if has_node is None:
has_node = repo.changelog.nodemap.__contains__
nonpublishroots = 0
for nhex, phase in remotephases.iteritems():
if nhex == b'publishing': # ignore data related to publish option
continue
node = bin(nhex)
if has_node(node) and int(phase):
nonpublishroots += 1
ui.statusnoi18n(b'number of roots: %d\n' % len(remotephases))
ui.statusnoi18n(b'number of known non public roots: %d\n' % nonpublishroots)
def d():
phases.remotephasessummary(repo, remotesubset, remotephases)
timer(d)
fm.end()
@command(
b'perf::manifest|perfmanifest',
[
(b'm', b'manifest-rev', False, b'Look up a manifest node revision'),
(b'', b'clear-disk', False, b'clear on-disk caches too'),
]
+ formatteropts,
b'REV|NODE',
)
def perfmanifest(ui, repo, rev, manifest_rev=False, clear_disk=False, **opts):
"""benchmark the time to read a manifest from disk and return a usable
dict-like object
Manifest caches are cleared before retrieval."""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
if not manifest_rev:
ctx = scmutil.revsingle(repo, rev, rev)
t = ctx.manifestnode()
else:
from mercurial.node import bin
if len(rev) == 40:
t = bin(rev)
else:
try:
rev = int(rev)
if util.safehasattr(repo.manifestlog, b'getstorage'):
t = repo.manifestlog.getstorage(b'').node(rev)
else:
t = repo.manifestlog._revlog.lookup(rev)
except ValueError:
raise error.Abort(
b'manifest revision must be integer or full node'
)
def d():
repo.manifestlog.clearcaches(clear_persisted_data=clear_disk)
repo.manifestlog[t].read()
timer(d)
fm.end()
@command(b'perf::changeset|perfchangeset', formatteropts)
def perfchangeset(ui, repo, rev, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
n = scmutil.revsingle(repo, rev).node()
def d():
repo.changelog.read(n)
# repo.changelog._cache = None
timer(d)
fm.end()
@command(b'perf::ignore|perfignore', formatteropts)
def perfignore(ui, repo, **opts):
"""benchmark operation related to computing ignore"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
dirstate = repo.dirstate
def setupone():
dirstate.invalidate()
clearfilecache(dirstate, b'_ignore')
def runone():
dirstate._ignore
timer(runone, setup=setupone, title=b"load")
fm.end()
@command(
b'perf::index|perfindex',
[
(b'', b'rev', [], b'revision to be looked up (default tip)'),
(b'', b'no-lookup', None, b'do not revision lookup post creation'),
]
+ formatteropts,
)
def perfindex(ui, repo, **opts):
"""benchmark index creation time followed by a lookup
The default is to look `tip` up. Depending on the index implementation,
the revision looked up can matters. For example, an implementation
scanning the index will have a faster lookup time for `--rev tip` than for
`--rev 0`. The number of looked up revisions and their order can also
matters.
Example of useful set to test:
* tip
* 0
* -10:
* :10
* -10: + :10
* :10: + -10:
* -10000:
* -10000: + 0
It is not currently possible to check for lookup of a missing node. For
deeper lookup benchmarking, checkout the `perfnodemap` command."""
import mercurial.revlog
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
mercurial.revlog._prereadsize = 2 ** 24 # disable lazy parser in old hg
if opts[b'no_lookup']:
if opts['rev']:
raise error.Abort('--no-lookup and --rev are mutually exclusive')
nodes = []
elif not opts[b'rev']:
nodes = [repo[b"tip"].node()]
else:
revs = scmutil.revrange(repo, opts[b'rev'])
cl = repo.changelog
nodes = [cl.node(r) for r in revs]
unfi = repo.unfiltered()
# find the filecache func directly
# This avoid polluting the benchmark with the filecache logic
makecl = unfi.__class__.changelog.func
def setup():
# probably not necessary, but for good measure
clearchangelog(unfi)
def d():
cl = makecl(unfi)
for n in nodes:
cl.rev(n)
timer(d, setup=setup)
fm.end()
@command(
b'perf::nodemap|perfnodemap',
[
(b'', b'rev', [], b'revision to be looked up (default tip)'),
(b'', b'clear-caches', True, b'clear revlog cache between calls'),
]
+ formatteropts,
)
def perfnodemap(ui, repo, **opts):
"""benchmark the time necessary to look up revision from a cold nodemap
Depending on the implementation, the amount and order of revision we look
up can varies. Example of useful set to test:
* tip
* 0
* -10:
* :10
* -10: + :10
* :10: + -10:
* -10000:
* -10000: + 0
The command currently focus on valid binary lookup. Benchmarking for
hexlookup, prefix lookup and missing lookup would also be valuable.
"""
import mercurial.revlog
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
mercurial.revlog._prereadsize = 2 ** 24 # disable lazy parser in old hg
unfi = repo.unfiltered()
clearcaches = opts[b'clear_caches']
# find the filecache func directly
# This avoid polluting the benchmark with the filecache logic
makecl = unfi.__class__.changelog.func
if not opts[b'rev']:
raise error.Abort(b'use --rev to specify revisions to look up')
revs = scmutil.revrange(repo, opts[b'rev'])
cl = repo.changelog
nodes = [cl.node(r) for r in revs]
# use a list to pass reference to a nodemap from one closure to the next
nodeget = [None]
def setnodeget():
# probably not necessary, but for good measure
clearchangelog(unfi)
cl = makecl(unfi)
if util.safehasattr(cl.index, 'get_rev'):
nodeget[0] = cl.index.get_rev
else:
nodeget[0] = cl.nodemap.get
def d():
get = nodeget[0]
for n in nodes:
get(n)
setup = None
if clearcaches:
def setup():
setnodeget()
else:
setnodeget()
d() # prewarm the data structure
timer(d, setup=setup)
fm.end()
@command(b'perf::startup|perfstartup', formatteropts)
def perfstartup(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
def d():
if os.name != 'nt':
os.system(
b"HGRCPATH= %s version -q > /dev/null" % fsencode(sys.argv[0])
)
else:
os.environ['HGRCPATH'] = r' '
os.system("%s version -q > NUL" % sys.argv[0])
timer(d)
fm.end()
@command(b'perf::parents|perfparents', formatteropts)
def perfparents(ui, repo, **opts):
"""benchmark the time necessary to fetch one changeset's parents.
The fetch is done using the `node identifier`, traversing all object layers
from the repository object. The first N revisions will be used for this
benchmark. N is controlled by the ``perf.parentscount`` config option
(default: 1000).
"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
# control the number of commits perfparents iterates over
# experimental config: perf.parentscount
count = getint(ui, b"perf", b"parentscount", 1000)
if len(repo.changelog) < count:
raise error.Abort(b"repo needs %d commits for this test" % count)
repo = repo.unfiltered()
nl = [repo.changelog.node(i) for i in _xrange(count)]
def d():
for n in nl:
repo.changelog.parents(n)
timer(d)
fm.end()
@command(b'perf::ctxfiles|perfctxfiles', formatteropts)
def perfctxfiles(ui, repo, x, **opts):
opts = _byteskwargs(opts)
x = int(x)
timer, fm = gettimer(ui, opts)
def d():
len(repo[x].files())
timer(d)
fm.end()
@command(b'perf::rawfiles|perfrawfiles', formatteropts)
def perfrawfiles(ui, repo, x, **opts):
opts = _byteskwargs(opts)
x = int(x)
timer, fm = gettimer(ui, opts)
cl = repo.changelog
def d():
len(cl.read(x)[3])
timer(d)
fm.end()
@command(b'perf::lookup|perflookup', formatteropts)
def perflookup(ui, repo, rev, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
timer(lambda: len(repo.lookup(rev)))
fm.end()
@command(
b'perf::linelogedits|perflinelogedits',
[
(b'n', b'edits', 10000, b'number of edits'),
(b'', b'max-hunk-lines', 10, b'max lines in a hunk'),
],
norepo=True,
)
def perflinelogedits(ui, **opts):
from mercurial import linelog
opts = _byteskwargs(opts)
edits = opts[b'edits']
maxhunklines = opts[b'max_hunk_lines']
maxb1 = 100000
random.seed(0)
randint = random.randint
currentlines = 0
arglist = []
for rev in _xrange(edits):
a1 = randint(0, currentlines)
a2 = randint(a1, min(currentlines, a1 + maxhunklines))
b1 = randint(0, maxb1)
b2 = randint(b1, b1 + maxhunklines)
currentlines += (b2 - b1) - (a2 - a1)
arglist.append((rev, a1, a2, b1, b2))
def d():
ll = linelog.linelog()
for args in arglist:
ll.replacelines(*args)
timer, fm = gettimer(ui, opts)
timer(d)
fm.end()
@command(b'perf::revrange|perfrevrange', formatteropts)
def perfrevrange(ui, repo, *specs, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
revrange = scmutil.revrange
timer(lambda: len(revrange(repo, specs)))
fm.end()
@command(b'perf::nodelookup|perfnodelookup', formatteropts)
def perfnodelookup(ui, repo, rev, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
import mercurial.revlog
mercurial.revlog._prereadsize = 2 ** 24 # disable lazy parser in old hg
n = scmutil.revsingle(repo, rev).node()
try:
cl = revlog(getsvfs(repo), radix=b"00changelog")
except TypeError:
cl = revlog(getsvfs(repo), indexfile=b"00changelog.i")
def d():
cl.rev(n)
clearcaches(cl)
timer(d)
fm.end()
@command(
b'perf::log|perflog',
[(b'', b'rename', False, b'ask log to follow renames')] + formatteropts,
)
def perflog(ui, repo, rev=None, **opts):
opts = _byteskwargs(opts)
if rev is None:
rev = []
timer, fm = gettimer(ui, opts)
ui.pushbuffer()
timer(
lambda: commands.log(
ui, repo, rev=rev, date=b'', user=b'', copies=opts.get(b'rename')
)
)
ui.popbuffer()
fm.end()
@command(b'perf::moonwalk|perfmoonwalk', formatteropts)
def perfmoonwalk(ui, repo, **opts):
"""benchmark walking the changelog backwards
This also loads the changelog data for each revision in the changelog.
"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
def moonwalk():
for i in repo.changelog.revs(start=(len(repo) - 1), stop=-1):
ctx = repo[i]
ctx.branch() # read changelog data (in addition to the index)
timer(moonwalk)
fm.end()
@command(
b'perf::templating|perftemplating',
[
(b'r', b'rev', [], b'revisions to run the template on'),
]
+ formatteropts,
)
def perftemplating(ui, repo, testedtemplate=None, **opts):
"""test the rendering time of a given template"""
if makelogtemplater is None:
raise error.Abort(
b"perftemplating not available with this Mercurial",
hint=b"use 4.3 or later",
)
opts = _byteskwargs(opts)
nullui = ui.copy()
nullui.fout = open(os.devnull, 'wb')
nullui.disablepager()
revs = opts.get(b'rev')
if not revs:
revs = [b'all()']
revs = list(scmutil.revrange(repo, revs))
defaulttemplate = (
b'{date|shortdate} [{rev}:{node|short}]'
b' {author|person}: {desc|firstline}\n'
)
if testedtemplate is None:
testedtemplate = defaulttemplate
displayer = makelogtemplater(nullui, repo, testedtemplate)
def format():
for r in revs:
ctx = repo[r]
displayer.show(ctx)
displayer.flush(ctx)
timer, fm = gettimer(ui, opts)
timer(format)
fm.end()
def _displaystats(ui, opts, entries, data):
# use a second formatter because the data are quite different, not sure
# how it flies with the templater.
fm = ui.formatter(b'perf-stats', opts)
for key, title in entries:
values = data[key]
nbvalues = len(data)
values.sort()
stats = {
'key': key,
'title': title,
'nbitems': len(values),
'min': values[0][0],
'10%': values[(nbvalues * 10) // 100][0],
'25%': values[(nbvalues * 25) // 100][0],
'50%': values[(nbvalues * 50) // 100][0],
'75%': values[(nbvalues * 75) // 100][0],
'80%': values[(nbvalues * 80) // 100][0],
'85%': values[(nbvalues * 85) // 100][0],
'90%': values[(nbvalues * 90) // 100][0],
'95%': values[(nbvalues * 95) // 100][0],
'99%': values[(nbvalues * 99) // 100][0],
'max': values[-1][0],
}
fm.startitem()
fm.data(**stats)
# make node pretty for the human output
fm.plain('### %s (%d items)\n' % (title, len(values)))
lines = [
'min',
'10%',
'25%',
'50%',
'75%',
'80%',
'85%',
'90%',
'95%',
'99%',
'max',
]
for l in lines:
fm.plain('%s: %s\n' % (l, stats[l]))
fm.end()
@command(
b'perf::helper-mergecopies|perfhelper-mergecopies',
formatteropts
+ [
(b'r', b'revs', [], b'restrict search to these revisions'),
(b'', b'timing', False, b'provides extra data (costly)'),
(b'', b'stats', False, b'provides statistic about the measured data'),
],
)
def perfhelpermergecopies(ui, repo, revs=[], **opts):
"""find statistics about potential parameters for `perfmergecopies`
This command find (base, p1, p2) triplet relevant for copytracing
benchmarking in the context of a merge. It reports values for some of the
parameters that impact merge copy tracing time during merge.
If `--timing` is set, rename detection is run and the associated timing
will be reported. The extra details come at the cost of slower command
execution.
Since rename detection is only run once, other factors might easily
affect the precision of the timing. However it should give a good
approximation of which revision triplets are very costly.
"""
opts = _byteskwargs(opts)
fm = ui.formatter(b'perf', opts)
dotiming = opts[b'timing']
dostats = opts[b'stats']
output_template = [
("base", "%(base)12s"),
("p1", "%(p1.node)12s"),
("p2", "%(p2.node)12s"),
("p1.nb-revs", "%(p1.nbrevs)12d"),
("p1.nb-files", "%(p1.nbmissingfiles)12d"),
("p1.renames", "%(p1.renamedfiles)12d"),
("p1.time", "%(p1.time)12.3f"),
("p2.nb-revs", "%(p2.nbrevs)12d"),
("p2.nb-files", "%(p2.nbmissingfiles)12d"),
("p2.renames", "%(p2.renamedfiles)12d"),
("p2.time", "%(p2.time)12.3f"),
("renames", "%(nbrenamedfiles)12d"),
("total.time", "%(time)12.3f"),
]
if not dotiming:
output_template = [
i
for i in output_template
if not ('time' in i[0] or 'renames' in i[0])
]
header_names = [h for (h, v) in output_template]
output = ' '.join([v for (h, v) in output_template]) + '\n'
header = ' '.join(['%12s'] * len(header_names)) + '\n'
fm.plain(header % tuple(header_names))
if not revs:
revs = ['all()']
revs = scmutil.revrange(repo, revs)
if dostats:
alldata = {
'nbrevs': [],
'nbmissingfiles': [],
}
if dotiming:
alldata['parentnbrenames'] = []
alldata['totalnbrenames'] = []
alldata['parenttime'] = []
alldata['totaltime'] = []
roi = repo.revs('merge() and %ld', revs)
for r in roi:
ctx = repo[r]
p1 = ctx.p1()
p2 = ctx.p2()
bases = repo.changelog._commonancestorsheads(p1.rev(), p2.rev())
for b in bases:
b = repo[b]
p1missing = copies._computeforwardmissing(b, p1)
p2missing = copies._computeforwardmissing(b, p2)
data = {
b'base': b.hex(),
b'p1.node': p1.hex(),
b'p1.nbrevs': len(repo.revs('only(%d, %d)', p1.rev(), b.rev())),
b'p1.nbmissingfiles': len(p1missing),
b'p2.node': p2.hex(),
b'p2.nbrevs': len(repo.revs('only(%d, %d)', p2.rev(), b.rev())),
b'p2.nbmissingfiles': len(p2missing),
}
if dostats:
if p1missing:
alldata['nbrevs'].append(
(data['p1.nbrevs'], b.hex(), p1.hex())
)
alldata['nbmissingfiles'].append(
(data['p1.nbmissingfiles'], b.hex(), p1.hex())
)
if p2missing:
alldata['nbrevs'].append(
(data['p2.nbrevs'], b.hex(), p2.hex())
)
alldata['nbmissingfiles'].append(
(data['p2.nbmissingfiles'], b.hex(), p2.hex())
)
if dotiming:
begin = util.timer()
mergedata = copies.mergecopies(repo, p1, p2, b)
end = util.timer()
# not very stable timing since we did only one run
data['time'] = end - begin
# mergedata contains five dicts: "copy", "movewithdir",
# "diverge", "renamedelete" and "dirmove".
# The first 4 are about renamed file so lets count that.
renames = len(mergedata[0])
renames += len(mergedata[1])
renames += len(mergedata[2])
renames += len(mergedata[3])
data['nbrenamedfiles'] = renames
begin = util.timer()
p1renames = copies.pathcopies(b, p1)
end = util.timer()
data['p1.time'] = end - begin
begin = util.timer()
p2renames = copies.pathcopies(b, p2)
end = util.timer()
data['p2.time'] = end - begin
data['p1.renamedfiles'] = len(p1renames)
data['p2.renamedfiles'] = len(p2renames)
if dostats:
if p1missing:
alldata['parentnbrenames'].append(
(data['p1.renamedfiles'], b.hex(), p1.hex())
)
alldata['parenttime'].append(
(data['p1.time'], b.hex(), p1.hex())
)
if p2missing:
alldata['parentnbrenames'].append(
(data['p2.renamedfiles'], b.hex(), p2.hex())
)
alldata['parenttime'].append(
(data['p2.time'], b.hex(), p2.hex())
)
if p1missing or p2missing:
alldata['totalnbrenames'].append(
(
data['nbrenamedfiles'],
b.hex(),
p1.hex(),
p2.hex(),
)
)
alldata['totaltime'].append(
(data['time'], b.hex(), p1.hex(), p2.hex())
)
fm.startitem()
fm.data(**data)
# make node pretty for the human output
out = data.copy()
out['base'] = fm.hexfunc(b.node())
out['p1.node'] = fm.hexfunc(p1.node())
out['p2.node'] = fm.hexfunc(p2.node())
fm.plain(output % out)
fm.end()
if dostats:
# use a second formatter because the data are quite different, not sure
# how it flies with the templater.
entries = [
('nbrevs', 'number of revision covered'),
('nbmissingfiles', 'number of missing files at head'),
]
if dotiming:
entries.append(
('parentnbrenames', 'rename from one parent to base')
)
entries.append(('totalnbrenames', 'total number of renames'))
entries.append(('parenttime', 'time for one parent'))
entries.append(('totaltime', 'time for both parents'))
_displaystats(ui, opts, entries, alldata)
@command(
b'perf::helper-pathcopies|perfhelper-pathcopies',
formatteropts
+ [
(b'r', b'revs', [], b'restrict search to these revisions'),
(b'', b'timing', False, b'provides extra data (costly)'),
(b'', b'stats', False, b'provides statistic about the measured data'),
],
)
def perfhelperpathcopies(ui, repo, revs=[], **opts):
"""find statistic about potential parameters for the `perftracecopies`
This command find source-destination pair relevant for copytracing testing.
It report value for some of the parameters that impact copy tracing time.
If `--timing` is set, rename detection is run and the associated timing
will be reported. The extra details comes at the cost of a slower command
execution.
Since the rename detection is only run once, other factors might easily
affect the precision of the timing. However it should give a good
approximation of which revision pairs are very costly.
"""
opts = _byteskwargs(opts)
fm = ui.formatter(b'perf', opts)
dotiming = opts[b'timing']
dostats = opts[b'stats']
if dotiming:
header = '%12s %12s %12s %12s %12s %12s\n'
output = (
"%(source)12s %(destination)12s "
"%(nbrevs)12d %(nbmissingfiles)12d "
"%(nbrenamedfiles)12d %(time)18.5f\n"
)
header_names = (
"source",
"destination",
"nb-revs",
"nb-files",
"nb-renames",
"time",
)
fm.plain(header % header_names)
else:
header = '%12s %12s %12s %12s\n'
output = (
"%(source)12s %(destination)12s "
"%(nbrevs)12d %(nbmissingfiles)12d\n"
)
fm.plain(header % ("source", "destination", "nb-revs", "nb-files"))
if not revs:
revs = ['all()']
revs = scmutil.revrange(repo, revs)
if dostats:
alldata = {
'nbrevs': [],
'nbmissingfiles': [],
}
if dotiming:
alldata['nbrenames'] = []
alldata['time'] = []
roi = repo.revs('merge() and %ld', revs)
for r in roi:
ctx = repo[r]
p1 = ctx.p1().rev()
p2 = ctx.p2().rev()
bases = repo.changelog._commonancestorsheads(p1, p2)
for p in (p1, p2):
for b in bases:
base = repo[b]
parent = repo[p]
missing = copies._computeforwardmissing(base, parent)
if not missing:
continue
data = {
b'source': base.hex(),
b'destination': parent.hex(),
b'nbrevs': len(repo.revs('only(%d, %d)', p, b)),
b'nbmissingfiles': len(missing),
}
if dostats:
alldata['nbrevs'].append(
(
data['nbrevs'],
base.hex(),
parent.hex(),
)
)
alldata['nbmissingfiles'].append(
(
data['nbmissingfiles'],
base.hex(),
parent.hex(),
)
)
if dotiming:
begin = util.timer()
renames = copies.pathcopies(base, parent)
end = util.timer()
# not very stable timing since we did only one run
data['time'] = end - begin
data['nbrenamedfiles'] = len(renames)
if dostats:
alldata['time'].append(
(
data['time'],
base.hex(),
parent.hex(),
)
)
alldata['nbrenames'].append(
(
data['nbrenamedfiles'],
base.hex(),
parent.hex(),
)
)
fm.startitem()
fm.data(**data)
out = data.copy()
out['source'] = fm.hexfunc(base.node())
out['destination'] = fm.hexfunc(parent.node())
fm.plain(output % out)
fm.end()
if dostats:
entries = [
('nbrevs', 'number of revision covered'),
('nbmissingfiles', 'number of missing files at head'),
]
if dotiming:
entries.append(('nbrenames', 'renamed files'))
entries.append(('time', 'time'))
_displaystats(ui, opts, entries, alldata)
@command(b'perf::cca|perfcca', formatteropts)
def perfcca(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
timer(lambda: scmutil.casecollisionauditor(ui, False, repo.dirstate))
fm.end()
@command(b'perf::fncacheload|perffncacheload', formatteropts)
def perffncacheload(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
s = repo.store
def d():
s.fncache._load()
timer(d)
fm.end()
@command(b'perf::fncachewrite|perffncachewrite', formatteropts)
def perffncachewrite(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
s = repo.store
lock = repo.lock()
s.fncache._load()
tr = repo.transaction(b'perffncachewrite')
tr.addbackup(b'fncache')
def d():
s.fncache._dirty = True
s.fncache.write(tr)
timer(d)
tr.close()
lock.release()
fm.end()
@command(b'perf::fncacheencode|perffncacheencode', formatteropts)
def perffncacheencode(ui, repo, **opts):
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
s = repo.store
s.fncache._load()
def d():
for p in s.fncache.entries:
s.encode(p)
timer(d)
fm.end()
def _bdiffworker(q, blocks, xdiff, ready, done):
while not done.is_set():
pair = q.get()
while pair is not None:
if xdiff:
mdiff.bdiff.xdiffblocks(*pair)
elif blocks:
mdiff.bdiff.blocks(*pair)
else:
mdiff.textdiff(*pair)
q.task_done()
pair = q.get()
q.task_done() # for the None one
with ready:
ready.wait()
def _manifestrevision(repo, mnode):
ml = repo.manifestlog
if util.safehasattr(ml, b'getstorage'):
store = ml.getstorage(b'')
else:
store = ml._revlog
return store.revision(mnode)
@command(
b'perf::bdiff|perfbdiff',
revlogopts
+ formatteropts
+ [
(
b'',
b'count',
1,
b'number of revisions to test (when using --startrev)',
),
(b'', b'alldata', False, b'test bdiffs for all associated revisions'),
(b'', b'threads', 0, b'number of thread to use (disable with 0)'),
(b'', b'blocks', False, b'test computing diffs into blocks'),
(b'', b'xdiff', False, b'use xdiff algorithm'),
],
b'-c|-m|FILE REV',
)
def perfbdiff(ui, repo, file_, rev=None, count=None, threads=0, **opts):
"""benchmark a bdiff between revisions
By default, benchmark a bdiff between its delta parent and itself.
With ``--count``, benchmark bdiffs between delta parents and self for N
revisions starting at the specified revision.
With ``--alldata``, assume the requested revision is a changeset and
measure bdiffs for all changes related to that changeset (manifest
and filelogs).
"""
opts = _byteskwargs(opts)
if opts[b'xdiff'] and not opts[b'blocks']:
raise error.CommandError(b'perfbdiff', b'--xdiff requires --blocks')
if opts[b'alldata']:
opts[b'changelog'] = True
if opts.get(b'changelog') or opts.get(b'manifest'):
file_, rev = None, file_
elif rev is None:
raise error.CommandError(b'perfbdiff', b'invalid arguments')
blocks = opts[b'blocks']
xdiff = opts[b'xdiff']
textpairs = []
r = cmdutil.openrevlog(repo, b'perfbdiff', file_, opts)
startrev = r.rev(r.lookup(rev))
for rev in range(startrev, min(startrev + count, len(r) - 1)):
if opts[b'alldata']:
# Load revisions associated with changeset.
ctx = repo[rev]
mtext = _manifestrevision(repo, ctx.manifestnode())
for pctx in ctx.parents():
pman = _manifestrevision(repo, pctx.manifestnode())
textpairs.append((pman, mtext))
# Load filelog revisions by iterating manifest delta.
man = ctx.manifest()
pman = ctx.p1().manifest()
for filename, change in pman.diff(man).items():
fctx = repo.file(filename)
f1 = fctx.revision(change[0][0] or -1)
f2 = fctx.revision(change[1][0] or -1)
textpairs.append((f1, f2))
else:
dp = r.deltaparent(rev)
textpairs.append((r.revision(dp), r.revision(rev)))
withthreads = threads > 0
if not withthreads:
def d():
for pair in textpairs:
if xdiff:
mdiff.bdiff.xdiffblocks(*pair)
elif blocks:
mdiff.bdiff.blocks(*pair)
else:
mdiff.textdiff(*pair)
else:
q = queue()
for i in _xrange(threads):
q.put(None)
ready = threading.Condition()
done = threading.Event()
for i in _xrange(threads):
threading.Thread(
target=_bdiffworker, args=(q, blocks, xdiff, ready, done)
).start()
q.join()
def d():
for pair in textpairs:
q.put(pair)
for i in _xrange(threads):
q.put(None)
with ready:
ready.notify_all()
q.join()
timer, fm = gettimer(ui, opts)
timer(d)
fm.end()
if withthreads:
done.set()
for i in _xrange(threads):
q.put(None)
with ready:
ready.notify_all()
@command(
b'perf::unbundle',
formatteropts,
b'BUNDLE_FILE',
)
def perf_unbundle(ui, repo, fname, **opts):
"""benchmark application of a bundle in a repository.
This does not include the final transaction processing"""
from mercurial import exchange
from mercurial import bundle2
opts = _byteskwargs(opts)
with repo.lock():
bundle = [None, None]
orig_quiet = repo.ui.quiet
try:
repo.ui.quiet = True
with open(fname, mode="rb") as f:
def noop_report(*args, **kwargs):
pass
def setup():
gen, tr = bundle
if tr is not None:
tr.abort()
bundle[:] = [None, None]
f.seek(0)
bundle[0] = exchange.readbundle(ui, f, fname)
bundle[1] = repo.transaction(b'perf::unbundle')
bundle[1]._report = noop_report # silence the transaction
def apply():
gen, tr = bundle
bundle2.applybundle(
repo,
gen,
tr,
source=b'perf::unbundle',
url=fname,
)
timer, fm = gettimer(ui, opts)
timer(apply, setup=setup)
fm.end()
finally:
repo.ui.quiet == orig_quiet
gen, tr = bundle
if tr is not None:
tr.abort()
@command(
b'perf::unidiff|perfunidiff',
revlogopts
+ formatteropts
+ [
(
b'',
b'count',
1,
b'number of revisions to test (when using --startrev)',
),
(b'', b'alldata', False, b'test unidiffs for all associated revisions'),
],
b'-c|-m|FILE REV',
)
def perfunidiff(ui, repo, file_, rev=None, count=None, **opts):
"""benchmark a unified diff between revisions
This doesn't include any copy tracing - it's just a unified diff
of the texts.
By default, benchmark a diff between its delta parent and itself.
With ``--count``, benchmark diffs between delta parents and self for N
revisions starting at the specified revision.
With ``--alldata``, assume the requested revision is a changeset and
measure diffs for all changes related to that changeset (manifest
and filelogs).
"""
opts = _byteskwargs(opts)
if opts[b'alldata']:
opts[b'changelog'] = True
if opts.get(b'changelog') or opts.get(b'manifest'):
file_, rev = None, file_
elif rev is None:
raise error.CommandError(b'perfunidiff', b'invalid arguments')
textpairs = []
r = cmdutil.openrevlog(repo, b'perfunidiff', file_, opts)
startrev = r.rev(r.lookup(rev))
for rev in range(startrev, min(startrev + count, len(r) - 1)):
if opts[b'alldata']:
# Load revisions associated with changeset.
ctx = repo[rev]
mtext = _manifestrevision(repo, ctx.manifestnode())
for pctx in ctx.parents():
pman = _manifestrevision(repo, pctx.manifestnode())
textpairs.append((pman, mtext))
# Load filelog revisions by iterating manifest delta.
man = ctx.manifest()
pman = ctx.p1().manifest()
for filename, change in pman.diff(man).items():
fctx = repo.file(filename)
f1 = fctx.revision(change[0][0] or -1)
f2 = fctx.revision(change[1][0] or -1)
textpairs.append((f1, f2))
else:
dp = r.deltaparent(rev)
textpairs.append((r.revision(dp), r.revision(rev)))
def d():
for left, right in textpairs:
# The date strings don't matter, so we pass empty strings.
headerlines, hunks = mdiff.unidiff(
left, b'', right, b'', b'left', b'right', binary=False
)
# consume iterators in roughly the way patch.py does
b'\n'.join(headerlines)
b''.join(sum((list(hlines) for hrange, hlines in hunks), []))
timer, fm = gettimer(ui, opts)
timer(d)
fm.end()
@command(b'perf::diffwd|perfdiffwd', formatteropts)
def perfdiffwd(ui, repo, **opts):
"""Profile diff of working directory changes"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
options = {
'w': 'ignore_all_space',
'b': 'ignore_space_change',
'B': 'ignore_blank_lines',
}
for diffopt in ('', 'w', 'b', 'B', 'wB'):
opts = {options[c]: b'1' for c in diffopt}
def d():
ui.pushbuffer()
commands.diff(ui, repo, **opts)
ui.popbuffer()
diffopt = diffopt.encode('ascii')
title = b'diffopts: %s' % (diffopt and (b'-' + diffopt) or b'none')
timer(d, title=title)
fm.end()
@command(
b'perf::revlogindex|perfrevlogindex',
revlogopts + formatteropts,
b'-c|-m|FILE',
)
def perfrevlogindex(ui, repo, file_=None, **opts):
"""Benchmark operations against a revlog index.
This tests constructing a revlog instance, reading index data,
parsing index data, and performing various operations related to
index data.
"""
opts = _byteskwargs(opts)
rl = cmdutil.openrevlog(repo, b'perfrevlogindex', file_, opts)
opener = getattr(rl, 'opener') # trick linter
# compat with hg <= 5.8
radix = getattr(rl, 'radix', None)
indexfile = getattr(rl, '_indexfile', None)
if indexfile is None:
# compatibility with <= hg-5.8
indexfile = getattr(rl, 'indexfile')
data = opener.read(indexfile)
header = struct.unpack(b'>I', data[0:4])[0]
version = header & 0xFFFF
if version == 1:
inline = header & (1 << 16)
else:
raise error.Abort(b'unsupported revlog version: %d' % version)
parse_index_v1 = getattr(mercurial.revlog, 'parse_index_v1', None)
if parse_index_v1 is None:
parse_index_v1 = mercurial.revlog.revlogio().parseindex
rllen = len(rl)
node0 = rl.node(0)
node25 = rl.node(rllen // 4)
node50 = rl.node(rllen // 2)
node75 = rl.node(rllen // 4 * 3)
node100 = rl.node(rllen - 1)
allrevs = range(rllen)
allrevsrev = list(reversed(allrevs))
allnodes = [rl.node(rev) for rev in range(rllen)]
allnodesrev = list(reversed(allnodes))
def constructor():
if radix is not None:
revlog(opener, radix=radix)
else:
# hg <= 5.8
revlog(opener, indexfile=indexfile)
def read():
with opener(indexfile) as fh:
fh.read()
def parseindex():
parse_index_v1(data, inline)
def getentry(revornode):
index = parse_index_v1(data, inline)[0]
index[revornode]
def getentries(revs, count=1):
index = parse_index_v1(data, inline)[0]
for i in range(count):
for rev in revs:
index[rev]
def resolvenode(node):
index = parse_index_v1(data, inline)[0]
rev = getattr(index, 'rev', None)
if rev is None:
nodemap = getattr(parse_index_v1(data, inline)[0], 'nodemap', None)
# This only works for the C code.
if nodemap is None:
return
rev = nodemap.__getitem__
try:
rev(node)
except error.RevlogError:
pass
def resolvenodes(nodes, count=1):
index = parse_index_v1(data, inline)[0]
rev = getattr(index, 'rev', None)
if rev is None:
nodemap = getattr(parse_index_v1(data, inline)[0], 'nodemap', None)
# This only works for the C code.
if nodemap is None:
return
rev = nodemap.__getitem__
for i in range(count):
for node in nodes:
try:
rev(node)
except error.RevlogError:
pass
benches = [
(constructor, b'revlog constructor'),
(read, b'read'),
(parseindex, b'create index object'),
(lambda: getentry(0), b'retrieve index entry for rev 0'),
(lambda: resolvenode(b'a' * 20), b'look up missing node'),
(lambda: resolvenode(node0), b'look up node at rev 0'),
(lambda: resolvenode(node25), b'look up node at 1/4 len'),
(lambda: resolvenode(node50), b'look up node at 1/2 len'),
(lambda: resolvenode(node75), b'look up node at 3/4 len'),
(lambda: resolvenode(node100), b'look up node at tip'),
# 2x variation is to measure caching impact.
(lambda: resolvenodes(allnodes), b'look up all nodes (forward)'),
(lambda: resolvenodes(allnodes, 2), b'look up all nodes 2x (forward)'),
(lambda: resolvenodes(allnodesrev), b'look up all nodes (reverse)'),
(
lambda: resolvenodes(allnodesrev, 2),
b'look up all nodes 2x (reverse)',
),
(lambda: getentries(allrevs), b'retrieve all index entries (forward)'),
(
lambda: getentries(allrevs, 2),
b'retrieve all index entries 2x (forward)',
),
(
lambda: getentries(allrevsrev),
b'retrieve all index entries (reverse)',
),
(
lambda: getentries(allrevsrev, 2),
b'retrieve all index entries 2x (reverse)',
),
]
for fn, title in benches:
timer, fm = gettimer(ui, opts)
timer(fn, title=title)
fm.end()
@command(
b'perf::revlogrevisions|perfrevlogrevisions',
revlogopts
+ formatteropts
+ [
(b'd', b'dist', 100, b'distance between the revisions'),
(b's', b'startrev', 0, b'revision to start reading at'),
(b'', b'reverse', False, b'read in reverse'),
],
b'-c|-m|FILE',
)
def perfrevlogrevisions(
ui, repo, file_=None, startrev=0, reverse=False, **opts
):
"""Benchmark reading a series of revisions from a revlog.
By default, we read every ``-d/--dist`` revision from 0 to tip of
the specified revlog.
The start revision can be defined via ``-s/--startrev``.
"""
opts = _byteskwargs(opts)
rl = cmdutil.openrevlog(repo, b'perfrevlogrevisions', file_, opts)
rllen = getlen(ui)(rl)
if startrev < 0:
startrev = rllen + startrev
def d():
rl.clearcaches()
beginrev = startrev
endrev = rllen
dist = opts[b'dist']
if reverse:
beginrev, endrev = endrev - 1, beginrev - 1
dist = -1 * dist
for x in _xrange(beginrev, endrev, dist):
# Old revisions don't support passing int.
n = rl.node(x)
rl.revision(n)
timer, fm = gettimer(ui, opts)
timer(d)
fm.end()
@command(
b'perf::revlogwrite|perfrevlogwrite',
revlogopts
+ formatteropts
+ [
(b's', b'startrev', 1000, b'revision to start writing at'),
(b'', b'stoprev', -1, b'last revision to write'),
(b'', b'count', 3, b'number of passes to perform'),
(b'', b'details', False, b'print timing for every revisions tested'),
(b'', b'source', b'full', b'the kind of data feed in the revlog'),
(b'', b'lazydeltabase', True, b'try the provided delta first'),
(b'', b'clear-caches', True, b'clear revlog cache between calls'),
],
b'-c|-m|FILE',
)
def perfrevlogwrite(ui, repo, file_=None, startrev=1000, stoprev=-1, **opts):
"""Benchmark writing a series of revisions to a revlog.
Possible source values are:
* `full`: add from a full text (default).
* `parent-1`: add from a delta to the first parent
* `parent-2`: add from a delta to the second parent if it exists
(use a delta from the first parent otherwise)
* `parent-smallest`: add from the smallest delta (either p1 or p2)
* `storage`: add from the existing precomputed deltas
Note: This performance command measures performance in a custom way. As a
result some of the global configuration of the 'perf' command does not
apply to it:
* ``pre-run``: disabled
* ``profile-benchmark``: disabled
* ``run-limits``: disabled use --count instead
"""
opts = _byteskwargs(opts)
rl = cmdutil.openrevlog(repo, b'perfrevlogwrite', file_, opts)
rllen = getlen(ui)(rl)
if startrev < 0:
startrev = rllen + startrev
if stoprev < 0:
stoprev = rllen + stoprev
lazydeltabase = opts['lazydeltabase']
source = opts['source']
clearcaches = opts['clear_caches']
validsource = (
b'full',
b'parent-1',
b'parent-2',
b'parent-smallest',
b'storage',
)
if source not in validsource:
raise error.Abort('invalid source type: %s' % source)
### actually gather results
count = opts['count']
if count <= 0:
raise error.Abort('invalide run count: %d' % count)
allresults = []
for c in range(count):
timing = _timeonewrite(
ui,
rl,
source,
startrev,
stoprev,
c + 1,
lazydeltabase=lazydeltabase,
clearcaches=clearcaches,
)
allresults.append(timing)
### consolidate the results in a single list
results = []
for idx, (rev, t) in enumerate(allresults[0]):
ts = [t]
for other in allresults[1:]:
orev, ot = other[idx]
assert orev == rev
ts.append(ot)
results.append((rev, ts))
resultcount = len(results)
### Compute and display relevant statistics
# get a formatter
fm = ui.formatter(b'perf', opts)
displayall = ui.configbool(b"perf", b"all-timing", False)
# print individual details if requested
if opts['details']:
for idx, item in enumerate(results, 1):
rev, data = item
title = 'revisions #%d of %d, rev %d' % (idx, resultcount, rev)
formatone(fm, data, title=title, displayall=displayall)
# sorts results by median time
results.sort(key=lambda x: sorted(x[1])[len(x[1]) // 2])
# list of (name, index) to display)
relevants = [
("min", 0),
("10%", resultcount * 10 // 100),
("25%", resultcount * 25 // 100),
("50%", resultcount * 70 // 100),
("75%", resultcount * 75 // 100),
("90%", resultcount * 90 // 100),
("95%", resultcount * 95 // 100),
("99%", resultcount * 99 // 100),
("99.9%", resultcount * 999 // 1000),
("99.99%", resultcount * 9999 // 10000),
("99.999%", resultcount * 99999 // 100000),
("max", -1),
]
if not ui.quiet:
for name, idx in relevants:
data = results[idx]
title = '%s of %d, rev %d' % (name, resultcount, data[0])
formatone(fm, data[1], title=title, displayall=displayall)
# XXX summing that many float will not be very precise, we ignore this fact
# for now
totaltime = []
for item in allresults:
totaltime.append(
(
sum(x[1][0] for x in item),
sum(x[1][1] for x in item),
sum(x[1][2] for x in item),
)
)
formatone(
fm,
totaltime,
title="total time (%d revs)" % resultcount,
displayall=displayall,
)
fm.end()
class _faketr:
def add(s, x, y, z=None):
return None
def _timeonewrite(
ui,
orig,
source,
startrev,
stoprev,
runidx=None,
lazydeltabase=True,
clearcaches=True,
):
timings = []
tr = _faketr()
with _temprevlog(ui, orig, startrev) as dest:
dest._lazydeltabase = lazydeltabase
revs = list(orig.revs(startrev, stoprev))
total = len(revs)
topic = 'adding'
if runidx is not None:
topic += ' (run #%d)' % runidx
# Support both old and new progress API
if util.safehasattr(ui, 'makeprogress'):
progress = ui.makeprogress(topic, unit='revs', total=total)
def updateprogress(pos):
progress.update(pos)
def completeprogress():
progress.complete()
else:
def updateprogress(pos):
ui.progress(topic, pos, unit='revs', total=total)
def completeprogress():
ui.progress(topic, None, unit='revs', total=total)
for idx, rev in enumerate(revs):
updateprogress(idx)
addargs, addkwargs = _getrevisionseed(orig, rev, tr, source)
if clearcaches:
dest.index.clearcaches()
dest.clearcaches()
with timeone() as r:
dest.addrawrevision(*addargs, **addkwargs)
timings.append((rev, r[0]))
updateprogress(total)
completeprogress()
return timings
def _getrevisionseed(orig, rev, tr, source):
from mercurial.node import nullid
linkrev = orig.linkrev(rev)
node = orig.node(rev)
p1, p2 = orig.parents(node)
flags = orig.flags(rev)
cachedelta = None
text = None
if source == b'full':
text = orig.revision(rev)
elif source == b'parent-1':
baserev = orig.rev(p1)
cachedelta = (baserev, orig.revdiff(p1, rev))
elif source == b'parent-2':
parent = p2
if p2 == nullid:
parent = p1
baserev = orig.rev(parent)
cachedelta = (baserev, orig.revdiff(parent, rev))
elif source == b'parent-smallest':
p1diff = orig.revdiff(p1, rev)
parent = p1
diff = p1diff
if p2 != nullid:
p2diff = orig.revdiff(p2, rev)
if len(p1diff) > len(p2diff):
parent = p2
diff = p2diff
baserev = orig.rev(parent)
cachedelta = (baserev, diff)
elif source == b'storage':
baserev = orig.deltaparent(rev)
cachedelta = (baserev, orig.revdiff(orig.node(baserev), rev))
return (
(text, tr, linkrev, p1, p2),
{'node': node, 'flags': flags, 'cachedelta': cachedelta},
)
@contextlib.contextmanager
def _temprevlog(ui, orig, truncaterev):
from mercurial import vfs as vfsmod
if orig._inline:
raise error.Abort('not supporting inline revlog (yet)')
revlogkwargs = {}
k = 'upperboundcomp'
if util.safehasattr(orig, k):
revlogkwargs[k] = getattr(orig, k)
indexfile = getattr(orig, '_indexfile', None)
if indexfile is None:
# compatibility with <= hg-5.8
indexfile = getattr(orig, 'indexfile')
origindexpath = orig.opener.join(indexfile)
datafile = getattr(orig, '_datafile', getattr(orig, 'datafile'))
origdatapath = orig.opener.join(datafile)
radix = b'revlog'
indexname = b'revlog.i'
dataname = b'revlog.d'
tmpdir = tempfile.mkdtemp(prefix='tmp-hgperf-')
try:
# copy the data file in a temporary directory
ui.debug('copying data in %s\n' % tmpdir)
destindexpath = os.path.join(tmpdir, 'revlog.i')
destdatapath = os.path.join(tmpdir, 'revlog.d')
shutil.copyfile(origindexpath, destindexpath)
shutil.copyfile(origdatapath, destdatapath)
# remove the data we want to add again
ui.debug('truncating data to be rewritten\n')
with open(destindexpath, 'ab') as index:
index.seek(0)
index.truncate(truncaterev * orig._io.size)
with open(destdatapath, 'ab') as data:
data.seek(0)
data.truncate(orig.start(truncaterev))
# instantiate a new revlog from the temporary copy
ui.debug('truncating adding to be rewritten\n')
vfs = vfsmod.vfs(tmpdir)
vfs.options = getattr(orig.opener, 'options', None)
try:
dest = revlog(vfs, radix=radix, **revlogkwargs)
except TypeError:
dest = revlog(
vfs, indexfile=indexname, datafile=dataname, **revlogkwargs
)
if dest._inline:
raise error.Abort('not supporting inline revlog (yet)')
# make sure internals are initialized
dest.revision(len(dest) - 1)
yield dest
del dest, vfs
finally:
shutil.rmtree(tmpdir, True)
@command(
b'perf::revlogchunks|perfrevlogchunks',
revlogopts
+ formatteropts
+ [
(b'e', b'engines', b'', b'compression engines to use'),
(b's', b'startrev', 0, b'revision to start at'),
],
b'-c|-m|FILE',
)
def perfrevlogchunks(ui, repo, file_=None, engines=None, startrev=0, **opts):
"""Benchmark operations on revlog chunks.
Logically, each revlog is a collection of fulltext revisions. However,
stored within each revlog are "chunks" of possibly compressed data. This
data needs to be read and decompressed or compressed and written.
This command measures the time it takes to read+decompress and recompress
chunks in a revlog. It effectively isolates I/O and compression performance.
For measurements of higher-level operations like resolving revisions,
see ``perfrevlogrevisions`` and ``perfrevlogrevision``.
"""
opts = _byteskwargs(opts)
rl = cmdutil.openrevlog(repo, b'perfrevlogchunks', file_, opts)
# _chunkraw was renamed to _getsegmentforrevs.
try:
segmentforrevs = rl._getsegmentforrevs
except AttributeError:
segmentforrevs = rl._chunkraw
# Verify engines argument.
if engines:
engines = {e.strip() for e in engines.split(b',')}
for engine in engines:
try:
util.compressionengines[engine]
except KeyError:
raise error.Abort(b'unknown compression engine: %s' % engine)
else:
engines = []
for e in util.compengines:
engine = util.compengines[e]
try:
if engine.available():
engine.revlogcompressor().compress(b'dummy')
engines.append(e)
except NotImplementedError:
pass
revs = list(rl.revs(startrev, len(rl) - 1))
def rlfh(rl):
if rl._inline:
indexfile = getattr(rl, '_indexfile', None)
if indexfile is None:
# compatibility with <= hg-5.8
indexfile = getattr(rl, 'indexfile')
return getsvfs(repo)(indexfile)
else:
datafile = getattr(rl, 'datafile', getattr(rl, 'datafile'))
return getsvfs(repo)(datafile)
def doread():
rl.clearcaches()
for rev in revs:
segmentforrevs(rev, rev)
def doreadcachedfh():
rl.clearcaches()
fh = rlfh(rl)
for rev in revs:
segmentforrevs(rev, rev, df=fh)
def doreadbatch():
rl.clearcaches()
segmentforrevs(revs[0], revs[-1])
def doreadbatchcachedfh():
rl.clearcaches()
fh = rlfh(rl)
segmentforrevs(revs[0], revs[-1], df=fh)
def dochunk():
rl.clearcaches()
fh = rlfh(rl)
for rev in revs:
rl._chunk(rev, df=fh)
chunks = [None]
def dochunkbatch():
rl.clearcaches()
fh = rlfh(rl)
# Save chunks as a side-effect.
chunks[0] = rl._chunks(revs, df=fh)
def docompress(compressor):
rl.clearcaches()
try:
# Swap in the requested compression engine.
oldcompressor = rl._compressor
rl._compressor = compressor
for chunk in chunks[0]:
rl.compress(chunk)
finally:
rl._compressor = oldcompressor
benches = [
(lambda: doread(), b'read'),
(lambda: doreadcachedfh(), b'read w/ reused fd'),
(lambda: doreadbatch(), b'read batch'),
(lambda: doreadbatchcachedfh(), b'read batch w/ reused fd'),
(lambda: dochunk(), b'chunk'),
(lambda: dochunkbatch(), b'chunk batch'),
]
for engine in sorted(engines):
compressor = util.compengines[engine].revlogcompressor()
benches.append(
(
functools.partial(docompress, compressor),
b'compress w/ %s' % engine,
)
)
for fn, title in benches:
timer, fm = gettimer(ui, opts)
timer(fn, title=title)
fm.end()
@command(
b'perf::revlogrevision|perfrevlogrevision',
revlogopts
+ formatteropts
+ [(b'', b'cache', False, b'use caches instead of clearing')],
b'-c|-m|FILE REV',
)
def perfrevlogrevision(ui, repo, file_, rev=None, cache=None, **opts):
"""Benchmark obtaining a revlog revision.
Obtaining a revlog revision consists of roughly the following steps:
1. Compute the delta chain
2. Slice the delta chain if applicable
3. Obtain the raw chunks for that delta chain
4. Decompress each raw chunk
5. Apply binary patches to obtain fulltext
6. Verify hash of fulltext
This command measures the time spent in each of these phases.
"""
opts = _byteskwargs(opts)
if opts.get(b'changelog') or opts.get(b'manifest'):
file_, rev = None, file_
elif rev is None:
raise error.CommandError(b'perfrevlogrevision', b'invalid arguments')
r = cmdutil.openrevlog(repo, b'perfrevlogrevision', file_, opts)
# _chunkraw was renamed to _getsegmentforrevs.
try:
segmentforrevs = r._getsegmentforrevs
except AttributeError:
segmentforrevs = r._chunkraw
node = r.lookup(rev)
rev = r.rev(node)
def getrawchunks(data, chain):
start = r.start
length = r.length
inline = r._inline
try:
iosize = r.index.entry_size
except AttributeError:
iosize = r._io.size
buffer = util.buffer
chunks = []
ladd = chunks.append
for idx, item in enumerate(chain):
offset = start(item[0])
bits = data[idx]
for rev in item:
chunkstart = start(rev)
if inline:
chunkstart += (rev + 1) * iosize
chunklength = length(rev)
ladd(buffer(bits, chunkstart - offset, chunklength))
return chunks
def dodeltachain(rev):
if not cache:
r.clearcaches()
r._deltachain(rev)
def doread(chain):
if not cache:
r.clearcaches()
for item in slicedchain:
segmentforrevs(item[0], item[-1])
def doslice(r, chain, size):
for s in slicechunk(r, chain, targetsize=size):
pass
def dorawchunks(data, chain):
if not cache:
r.clearcaches()
getrawchunks(data, chain)
def dodecompress(chunks):
decomp = r.decompress
for chunk in chunks:
decomp(chunk)
def dopatch(text, bins):
if not cache:
r.clearcaches()
mdiff.patches(text, bins)
def dohash(text):
if not cache:
r.clearcaches()
r.checkhash(text, node, rev=rev)
def dorevision():
if not cache:
r.clearcaches()
r.revision(node)
try:
from mercurial.revlogutils.deltas import slicechunk
except ImportError:
slicechunk = getattr(revlog, '_slicechunk', None)
size = r.length(rev)
chain = r._deltachain(rev)[0]
if not getattr(r, '_withsparseread', False):
slicedchain = (chain,)
else:
slicedchain = tuple(slicechunk(r, chain, targetsize=size))
data = [segmentforrevs(seg[0], seg[-1])[1] for seg in slicedchain]
rawchunks = getrawchunks(data, slicedchain)
bins = r._chunks(chain)
text = bytes(bins[0])
bins = bins[1:]
text = mdiff.patches(text, bins)
benches = [
(lambda: dorevision(), b'full'),
(lambda: dodeltachain(rev), b'deltachain'),
(lambda: doread(chain), b'read'),
]
if getattr(r, '_withsparseread', False):
slicing = (lambda: doslice(r, chain, size), b'slice-sparse-chain')
benches.append(slicing)
benches.extend(
[
(lambda: dorawchunks(data, slicedchain), b'rawchunks'),
(lambda: dodecompress(rawchunks), b'decompress'),
(lambda: dopatch(text, bins), b'patch'),
(lambda: dohash(text), b'hash'),
]
)
timer, fm = gettimer(ui, opts)
for fn, title in benches:
timer(fn, title=title)
fm.end()
@command(
b'perf::revset|perfrevset',
[
(b'C', b'clear', False, b'clear volatile cache between each call.'),
(b'', b'contexts', False, b'obtain changectx for each revision'),
]
+ formatteropts,
b"REVSET",
)
def perfrevset(ui, repo, expr, clear=False, contexts=False, **opts):
"""benchmark the execution time of a revset
Use the --clean option if need to evaluate the impact of build volatile
revisions set cache on the revset execution. Volatile cache hold filtered
and obsolete related cache."""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
def d():
if clear:
repo.invalidatevolatilesets()
if contexts:
for ctx in repo.set(expr):
pass
else:
for r in repo.revs(expr):
pass
timer(d)
fm.end()
@command(
b'perf::volatilesets|perfvolatilesets',
[
(b'', b'clear-obsstore', False, b'drop obsstore between each call.'),
]
+ formatteropts,
)
def perfvolatilesets(ui, repo, *names, **opts):
"""benchmark the computation of various volatile set
Volatile set computes element related to filtering and obsolescence."""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
repo = repo.unfiltered()
def getobs(name):
def d():
repo.invalidatevolatilesets()
if opts[b'clear_obsstore']:
clearfilecache(repo, b'obsstore')
obsolete.getrevs(repo, name)
return d
allobs = sorted(obsolete.cachefuncs)
if names:
allobs = [n for n in allobs if n in names]
for name in allobs:
timer(getobs(name), title=name)
def getfiltered(name):
def d():
repo.invalidatevolatilesets()
if opts[b'clear_obsstore']:
clearfilecache(repo, b'obsstore')
repoview.filterrevs(repo, name)
return d
allfilter = sorted(repoview.filtertable)
if names:
allfilter = [n for n in allfilter if n in names]
for name in allfilter:
timer(getfiltered(name), title=name)
fm.end()
@command(
b'perf::branchmap|perfbranchmap',
[
(b'f', b'full', False, b'Includes build time of subset'),
(
b'',
b'clear-revbranch',
False,
b'purge the revbranch cache between computation',
),
]
+ formatteropts,
)
def perfbranchmap(ui, repo, *filternames, **opts):
"""benchmark the update of a branchmap
This benchmarks the full repo.branchmap() call with read and write disabled
"""
opts = _byteskwargs(opts)
full = opts.get(b"full", False)
clear_revbranch = opts.get(b"clear_revbranch", False)
timer, fm = gettimer(ui, opts)
def getbranchmap(filtername):
"""generate a benchmark function for the filtername"""
if filtername is None:
view = repo
else:
view = repo.filtered(filtername)
if util.safehasattr(view._branchcaches, '_per_filter'):
filtered = view._branchcaches._per_filter
else:
# older versions
filtered = view._branchcaches
def d():
if clear_revbranch:
repo.revbranchcache()._clear()
if full:
view._branchcaches.clear()
else:
filtered.pop(filtername, None)
view.branchmap()
return d
# add filter in smaller subset to bigger subset
possiblefilters = set(repoview.filtertable)
if filternames:
possiblefilters &= set(filternames)
subsettable = getbranchmapsubsettable()
allfilters = []
while possiblefilters:
for name in possiblefilters:
subset = subsettable.get(name)
if subset not in possiblefilters:
break
else:
assert False, b'subset cycle %s!' % possiblefilters
allfilters.append(name)
possiblefilters.remove(name)
# warm the cache
if not full:
for name in allfilters:
repo.filtered(name).branchmap()
if not filternames or b'unfiltered' in filternames:
# add unfiltered
allfilters.append(None)
if util.safehasattr(branchmap.branchcache, 'fromfile'):
branchcacheread = safeattrsetter(branchmap.branchcache, b'fromfile')
branchcacheread.set(classmethod(lambda *args: None))
else:
# older versions
branchcacheread = safeattrsetter(branchmap, b'read')
branchcacheread.set(lambda *args: None)
branchcachewrite = safeattrsetter(branchmap.branchcache, b'write')
branchcachewrite.set(lambda *args: None)
try:
for name in allfilters:
printname = name
if name is None:
printname = b'unfiltered'
timer(getbranchmap(name), title=printname)
finally:
branchcacheread.restore()
branchcachewrite.restore()
fm.end()
@command(
b'perf::branchmapupdate|perfbranchmapupdate',
[
(b'', b'base', [], b'subset of revision to start from'),
(b'', b'target', [], b'subset of revision to end with'),
(b'', b'clear-caches', False, b'clear cache between each runs'),
]
+ formatteropts,
)
def perfbranchmapupdate(ui, repo, base=(), target=(), **opts):
"""benchmark branchmap update from for <base> revs to <target> revs
If `--clear-caches` is passed, the following items will be reset before
each update:
* the changelog instance and associated indexes
* the rev-branch-cache instance
Examples:
# update for the one last revision
$ hg perfbranchmapupdate --base 'not tip' --target 'tip'
$ update for change coming with a new branch
$ hg perfbranchmapupdate --base 'stable' --target 'default'
"""
from mercurial import branchmap
from mercurial import repoview
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
clearcaches = opts[b'clear_caches']
unfi = repo.unfiltered()
x = [None] # used to pass data between closure
# we use a `list` here to avoid possible side effect from smartset
baserevs = list(scmutil.revrange(repo, base))
targetrevs = list(scmutil.revrange(repo, target))
if not baserevs:
raise error.Abort(b'no revisions selected for --base')
if not targetrevs:
raise error.Abort(b'no revisions selected for --target')
# make sure the target branchmap also contains the one in the base
targetrevs = list(set(baserevs) | set(targetrevs))
targetrevs.sort()
cl = repo.changelog
allbaserevs = list(cl.ancestors(baserevs, inclusive=True))
allbaserevs.sort()
alltargetrevs = frozenset(cl.ancestors(targetrevs, inclusive=True))
newrevs = list(alltargetrevs.difference(allbaserevs))
newrevs.sort()
allrevs = frozenset(unfi.changelog.revs())
basefilterrevs = frozenset(allrevs.difference(allbaserevs))
targetfilterrevs = frozenset(allrevs.difference(alltargetrevs))
def basefilter(repo, visibilityexceptions=None):
return basefilterrevs
def targetfilter(repo, visibilityexceptions=None):
return targetfilterrevs
msg = b'benchmark of branchmap with %d revisions with %d new ones\n'
ui.status(msg % (len(allbaserevs), len(newrevs)))
if targetfilterrevs:
msg = b'(%d revisions still filtered)\n'
ui.status(msg % len(targetfilterrevs))
try:
repoview.filtertable[b'__perf_branchmap_update_base'] = basefilter
repoview.filtertable[b'__perf_branchmap_update_target'] = targetfilter
baserepo = repo.filtered(b'__perf_branchmap_update_base')
targetrepo = repo.filtered(b'__perf_branchmap_update_target')
# try to find an existing branchmap to reuse
subsettable = getbranchmapsubsettable()
candidatefilter = subsettable.get(None)
while candidatefilter is not None:
candidatebm = repo.filtered(candidatefilter).branchmap()
if candidatebm.validfor(baserepo):
filtered = repoview.filterrevs(repo, candidatefilter)
missing = [r for r in allbaserevs if r in filtered]
base = candidatebm.copy()
base.update(baserepo, missing)
break
candidatefilter = subsettable.get(candidatefilter)
else:
# no suitable subset where found
base = branchmap.branchcache()
base.update(baserepo, allbaserevs)
def setup():
x[0] = base.copy()
if clearcaches:
unfi._revbranchcache = None
clearchangelog(repo)
def bench():
x[0].update(targetrepo, newrevs)
timer(bench, setup=setup)
fm.end()
finally:
repoview.filtertable.pop(b'__perf_branchmap_update_base', None)
repoview.filtertable.pop(b'__perf_branchmap_update_target', None)
@command(
b'perf::branchmapload|perfbranchmapload',
[
(b'f', b'filter', b'', b'Specify repoview filter'),
(b'', b'list', False, b'List brachmap filter caches'),
(b'', b'clear-revlogs', False, b'refresh changelog and manifest'),
]
+ formatteropts,
)
def perfbranchmapload(ui, repo, filter=b'', list=False, **opts):
"""benchmark reading the branchmap"""
opts = _byteskwargs(opts)
clearrevlogs = opts[b'clear_revlogs']
if list:
for name, kind, st in repo.cachevfs.readdir(stat=True):
if name.startswith(b'branch2'):
filtername = name.partition(b'-')[2] or b'unfiltered'
ui.status(
b'%s - %s\n' % (filtername, util.bytecount(st.st_size))
)
return
if not filter:
filter = None
subsettable = getbranchmapsubsettable()
if filter is None:
repo = repo.unfiltered()
else:
repo = repoview.repoview(repo, filter)
repo.branchmap() # make sure we have a relevant, up to date branchmap
try:
fromfile = branchmap.branchcache.fromfile
except AttributeError:
# older versions
fromfile = branchmap.read
currentfilter = filter
# try once without timer, the filter may not be cached
while fromfile(repo) is None:
currentfilter = subsettable.get(currentfilter)
if currentfilter is None:
raise error.Abort(
b'No branchmap cached for %s repo' % (filter or b'unfiltered')
)
repo = repo.filtered(currentfilter)
timer, fm = gettimer(ui, opts)
def setup():
if clearrevlogs:
clearchangelog(repo)
def bench():
fromfile(repo)
timer(bench, setup=setup)
fm.end()
@command(b'perf::loadmarkers|perfloadmarkers')
def perfloadmarkers(ui, repo):
"""benchmark the time to parse the on-disk markers for a repo
Result is the number of markers in the repo."""
timer, fm = gettimer(ui)
svfs = getsvfs(repo)
timer(lambda: len(obsolete.obsstore(repo, svfs)))
fm.end()
@command(
b'perf::lrucachedict|perflrucachedict',
formatteropts
+ [
(b'', b'costlimit', 0, b'maximum total cost of items in cache'),
(b'', b'mincost', 0, b'smallest cost of items in cache'),
(b'', b'maxcost', 100, b'maximum cost of items in cache'),
(b'', b'size', 4, b'size of cache'),
(b'', b'gets', 10000, b'number of key lookups'),
(b'', b'sets', 10000, b'number of key sets'),
(b'', b'mixed', 10000, b'number of mixed mode operations'),
(
b'',
b'mixedgetfreq',
50,
b'frequency of get vs set ops in mixed mode',
),
],
norepo=True,
)
def perflrucache(
ui,
mincost=0,
maxcost=100,
costlimit=0,
size=4,
gets=10000,
sets=10000,
mixed=10000,
mixedgetfreq=50,
**opts
):
opts = _byteskwargs(opts)
def doinit():
for i in _xrange(10000):
util.lrucachedict(size)
costrange = list(range(mincost, maxcost + 1))
values = []
for i in _xrange(size):
values.append(random.randint(0, _maxint))
# Get mode fills the cache and tests raw lookup performance with no
# eviction.
getseq = []
for i in _xrange(gets):
getseq.append(random.choice(values))
def dogets():
d = util.lrucachedict(size)
for v in values:
d[v] = v
for key in getseq:
value = d[key]
value # silence pyflakes warning
def dogetscost():
d = util.lrucachedict(size, maxcost=costlimit)
for i, v in enumerate(values):
d.insert(v, v, cost=costs[i])
for key in getseq:
try:
value = d[key]
value # silence pyflakes warning
except KeyError:
pass
# Set mode tests insertion speed with cache eviction.
setseq = []
costs = []
for i in _xrange(sets):
setseq.append(random.randint(0, _maxint))
costs.append(random.choice(costrange))
def doinserts():
d = util.lrucachedict(size)
for v in setseq:
d.insert(v, v)
def doinsertscost():
d = util.lrucachedict(size, maxcost=costlimit)
for i, v in enumerate(setseq):
d.insert(v, v, cost=costs[i])
def dosets():
d = util.lrucachedict(size)
for v in setseq:
d[v] = v
# Mixed mode randomly performs gets and sets with eviction.
mixedops = []
for i in _xrange(mixed):
r = random.randint(0, 100)
if r < mixedgetfreq:
op = 0
else:
op = 1
mixedops.append(
(op, random.randint(0, size * 2), random.choice(costrange))
)
def domixed():
d = util.lrucachedict(size)
for op, v, cost in mixedops:
if op == 0:
try:
d[v]
except KeyError:
pass
else:
d[v] = v
def domixedcost():
d = util.lrucachedict(size, maxcost=costlimit)
for op, v, cost in mixedops:
if op == 0:
try:
d[v]
except KeyError:
pass
else:
d.insert(v, v, cost=cost)
benches = [
(doinit, b'init'),
]
if costlimit:
benches.extend(
[
(dogetscost, b'gets w/ cost limit'),
(doinsertscost, b'inserts w/ cost limit'),
(domixedcost, b'mixed w/ cost limit'),
]
)
else:
benches.extend(
[
(dogets, b'gets'),
(doinserts, b'inserts'),
(dosets, b'sets'),
(domixed, b'mixed'),
]
)
for fn, title in benches:
timer, fm = gettimer(ui, opts)
timer(fn, title=title)
fm.end()
@command(
b'perf::write|perfwrite',
formatteropts
+ [
(b'', b'write-method', b'write', b'ui write method'),
(b'', b'nlines', 100, b'number of lines'),
(b'', b'nitems', 100, b'number of items (per line)'),
(b'', b'item', b'x', b'item that is written'),
(b'', b'batch-line', None, b'pass whole line to write method at once'),
(b'', b'flush-line', None, b'flush after each line'),
],
)
def perfwrite(ui, repo, **opts):
"""microbenchmark ui.write (and others)"""
opts = _byteskwargs(opts)
write = getattr(ui, _sysstr(opts[b'write_method']))
nlines = int(opts[b'nlines'])
nitems = int(opts[b'nitems'])
item = opts[b'item']
batch_line = opts.get(b'batch_line')
flush_line = opts.get(b'flush_line')
if batch_line:
line = item * nitems + b'\n'
def benchmark():
for i in pycompat.xrange(nlines):
if batch_line:
write(line)
else:
for i in pycompat.xrange(nitems):
write(item)
write(b'\n')
if flush_line:
ui.flush()
ui.flush()
timer, fm = gettimer(ui, opts)
timer(benchmark)
fm.end()
def uisetup(ui):
if util.safehasattr(cmdutil, b'openrevlog') and not util.safehasattr(
commands, b'debugrevlogopts'
):
# for "historical portability":
# In this case, Mercurial should be 1.9 (or a79fea6b3e77) -
# 3.7 (or 5606f7d0d063). Therefore, '--dir' option for
# openrevlog() should cause failure, because it has been
# available since 3.5 (or 49c583ca48c4).
def openrevlog(orig, repo, cmd, file_, opts):
if opts.get(b'dir') and not util.safehasattr(repo, b'dirlog'):
raise error.Abort(
b"This version doesn't support --dir option",
hint=b"use 3.5 or later",
)
return orig(repo, cmd, file_, opts)
extensions.wrapfunction(cmdutil, b'openrevlog', openrevlog)
@command(
b'perf::progress|perfprogress',
formatteropts
+ [
(b'', b'topic', b'topic', b'topic for progress messages'),
(b'c', b'total', 1000000, b'total value we are progressing to'),
],
norepo=True,
)
def perfprogress(ui, topic=None, total=None, **opts):
"""printing of progress bars"""
opts = _byteskwargs(opts)
timer, fm = gettimer(ui, opts)
def doprogress():
with ui.makeprogress(topic, total=total) as progress:
for i in _xrange(total):
progress.increment()
timer(doprogress)
fm.end()