bisect: avoid copying ancestor list for non-merge commits
During a bisection, hg needs to compute a list of all ancestors for every
candidate commit. This is accomplished via a bottom-up traversal of the set of
candidates, during which each revision's ancestor list is populated using the
ancestor list of its parent(s). Previously, this involved copying the entire
list, which could be very long in if the bisection range was large.
To help improve this, we can observe that each candidate commit is visited
exactly once, at which point its ancestor list is copied into its children's
lists and then dropped. In the case of non-merge commits, a commit's ancestor
list consists exactly of its parent's list plus itself. This means that we can
trivially reuse the parent's existing list for one of its non-merge children,
which avoids copying entirely if that commit is the parent's only child. This
makes bisections over linear ranges of commits much faster.
During some informal testing in the large publicly-available `mozilla-central`
repository, this noticeably sped up bisections over large ranges of history:
Setup:
$ cd mozilla-central
$ hg bisect --reset
$ hg bisect --good 0
$ hg log -r tip -T '{rev}\n'
628417
Test:
$ time hg bisect --bad tip --noupdate
Before:
real 3m35.927s
user 3m35.553s
sys 0m0.319s
After:
real 1m41.142s
user 1m40.810s
sys 0m0.285s
============================================
Testing obsolescence markers push: Cases A.1
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category A: simple cases
TestCase 1: pushing a single head
Subcases:
# A.1.1 pushing a single head (2 variants)
# A.1.2 pushing multiple changesets into a single head (2 variants)
Case: A.1.1 pushing a single head
=================================
..
.. {{{
.. ⇠◔ A
.. |
.. ● O
.. }}}
..
.. Marker exists from:
..
.. * A
..
.. Commands run:
..
.. * hg push -r A
.. * hg push
..
.. Expected exchange:
..
.. * chain from A
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos A.1.1
creating test repo for test case A.1.1
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
1 new obsolescence markers
$ hg log -G
@ f5bc6836db60 (draft): A
|
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
setup both variants
$ cp -R A.1.1 A.1.1.a
$ cp -R A.1.1 A.1.1.b
Variant a: push -r A
--------------------
$ dotest A.1.1.a A
## Running testcase A.1.1.a
# testing echange of "A" (f5bc6836db60)
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "f5bc6836db60" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
new changesets f5bc6836db60 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Variant b: push
---------------
$ dotest A.1.1.b
## Running testcase A.1.1.b
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
new changesets f5bc6836db60 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
A.1.2 pushing multiple changesets into a single head
====================================================
.. {{{
.. ◔ B
.. |
.. ⇠◔ A
.. |
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * A
..
.. Command run:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * chain from A
Setup
-----
initial
$ setuprepos A.1.2
creating test repo for test case A.1.2
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ mkcommit B
$ hg log -G
@ f6fbb35d8ac9 (draft): B
|
o f5bc6836db60 (draft): A
|
o a9bdc8b26820 (public): O
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
1 new obsolescence markers
$ inspect_obsmarkers
obsstore content
================
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
setup both variants
$ cp -R A.1.2 A.1.2.a
$ cp -R A.1.2 A.1.2.b
Variant a: push -r A
--------------------
$ dotest A.1.2.a B
## Running testcase A.1.2.a
# testing echange of "B" (f6fbb35d8ac9)
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "B" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "f6fbb35d8ac9" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 new obsolescence markers
new changesets f5bc6836db60:f6fbb35d8ac9 (2 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Variant b: push
---------------
$ dotest A.1.2.b
## Running testcase A.1.2.b
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 new obsolescence markers
new changesets f5bc6836db60:f6fbb35d8ac9 (2 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}