caches: move the 'updating the branch cache' message in 'updatecaches'
We are about to remove the branchmap cache update in changegroup application.
There is a debug message alongside this update that we do not want to loose. We
move the message beforehand to simplify the test update in the next changeset.
The message move is quite noisy and isolating that noise is useful.
Most tests update are just line reordering since the message is issued at a
later point during the transaction.
After this changes, the message is displayed in more case since local commit
creation also issue it.
============================================
Testing obsolescence markers push: Cases A.1
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category A: simple cases
TestCase 1: pushing a single head
Subcases:
# A.1.1 pushing a single head (2 variants)
# A.1.2 pushing multiple changesets into a single head (2 variants)
Case: A.1.1 pushing a single head
=================================
..
.. {{{
.. ⇠◔ A
.. |
.. ● O
.. }}}
..
.. Marker exists from:
..
.. * A
..
.. Commands run:
..
.. * hg push -r A
.. * hg push
..
.. Expected exchange:
..
.. * chain from A
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos A.1.1
creating test repo for test case A.1.1
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
$ hg log -G
@ f5bc6836db60 (draft): A
|
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
setup both variants
$ cp -R A.1.1 A.1.1.a
$ cp -R A.1.1 A.1.1.b
Variant a: push -r A
--------------------
$ dotest A.1.1.a A
## Running testcase A.1.1.a
# testing echange of "A" (f5bc6836db60)
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "f5bc6836db60" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Variant b: push
---------------
$ dotest A.1.1.b
## Running testcase A.1.1.b
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
A.1.2 pushing multiple changesets into a single head
====================================================
.. {{{
.. ◔ B
.. |
.. ⇠◔ A
.. |
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * A
..
.. Command run:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * chain from A
Setup
-----
initial
$ setuprepos A.1.2
creating test repo for test case A.1.2
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ mkcommit B
$ hg log -G
@ f6fbb35d8ac9 (draft): B
|
o f5bc6836db60 (draft): A
|
o a9bdc8b26820 (public): O
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
$ inspect_obsmarkers
obsstore content
================
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
setup both variants
$ cp -R A.1.2 A.1.2.a
$ cp -R A.1.2 A.1.2.b
Variant a: push -r A
--------------------
$ dotest A.1.2.a B
## Running testcase A.1.2.a
# testing echange of "B" (f6fbb35d8ac9)
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "B" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "f6fbb35d8ac9" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 new obsolescence markers
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Variant b: push
---------------
$ dotest A.1.2.b
## Running testcase A.1.2.b
## initial state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
1 new obsolescence markers
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}