tests: replace "cp -r" with "cp -R"
The POSIX documentation about "cp" [1] says:
....
RATIONALE
....
Earlier versions of this standard included support for the -r option to
copy file hierarchies. The -r option is historical practice on BSD and
BSD-derived systems. This option is no longer specified by POSIX.1-2008
but may be present in some implementations. The -R option was added as a
close synonym to the -r option, selected for consistency with all other
options in this volume of POSIX.1-2008 that do recursive directory
descent.
The difference between -R and the removed -r option is in the treatment
by cp of file types other than regular and directory. It was
implementation-defined how the - option treated special files to allow
both historical implementations and those that chose to support -r with
the same abilities as -R defined by this volume of POSIX.1-2008. The
original -r flag, for historic reasons, did not handle special files any
differently from regular files, but always read the file and copied its
contents. This had obvious problems in the presence of special file
types; for example, character devices, FIFOs, and sockets.
....
....
Issue 6
The -r option is marked obsolescent.
....
Issue 7
....
The obsolescent -r option is removed.
....
(No "Issue 8" yet)
Therefore it's clear that "cp -R" is strictly better than "cp -r".
The issue was discovered when running tests on OS X after 0d87b1caed92.
[1]: pubs.opengroup.org/onlinepubs/9699919799/utilities/cp.html
$ hg init ignorerepo
$ cd ignorerepo
Issue562: .hgignore requires newline at end:
$ touch foo
$ touch bar
$ touch baz
$ cat > makeignore.py <<EOF
> f = open(".hgignore", "w")
> f.write("ignore\n")
> f.write("foo\n")
> # No EOL here
> f.write("bar")
> f.close()
> EOF
$ python makeignore.py
Should display baz only:
$ hg status
? baz
$ rm foo bar baz .hgignore makeignore.py
$ touch a.o
$ touch a.c
$ touch syntax
$ mkdir dir
$ touch dir/a.o
$ touch dir/b.o
$ touch dir/c.o
$ hg add dir/a.o
$ hg commit -m 0
$ hg add dir/b.o
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
$ echo "*.o" > .hgignore
$ hg status
abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
[255]
$ echo ".*\.o" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
Ensure that comments work:
$ touch 'foo#bar' 'quux#'
#if no-windows
$ touch 'baz\#wat'
#endif
$ cat <<'EOF' >> .hgignore
> # full-line comment
> # whitespace-only comment line
> syntax# pattern, no whitespace, then comment
> a.c # pattern, then whitespace, then comment
> baz\\# # escaped comment character
> foo\#b # escaped comment character
> quux\## escaped comment character at end of name
> EOF
$ hg status
A dir/b.o
? .hgignore
$ rm 'foo#bar' 'quux#'
#if no-windows
$ rm 'baz\#wat'
#endif
Check it does not ignore the current directory '.':
$ echo "^\." > .hgignore
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
Test that patterns from ui.ignore options are read:
$ echo > .hgignore
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
> EOF
$ echo "glob:**.o" > .hg/testhgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
empty out testhgignore
$ echo > .hg/testhgignore
Test relative ignore path (issue4473):
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.relative = .hg/testhgignorerel
> EOF
$ echo "glob:*.o" > .hg/testhgignorerel
$ cd dir
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ cd ..
$ echo > .hg/testhgignorerel
$ echo "syntax: glob" > .hgignore
$ echo "re:.*\.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "syntax: invalid" > .hgignore
$ hg status
$TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid' (glob)
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
? syntax
$ echo "syntax: glob" > .hgignore
$ echo "*.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "relglob:syntax*" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
$ echo "relglob:*" > .hgignore
$ hg status
A dir/b.o
$ cd dir
$ hg status .
A b.o
$ hg debugignore
(?:(?:|.*/)[^/]*(?:/|$))
$ hg debugignore b.o
b.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)
$ cd ..
Check patterns that match only the directory
$ echo "^dir\$" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? syntax
Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)
$ echo "syntax: glob" > .hgignore
$ echo "dir/**/c.o" >> .hgignore
$ touch dir/c.o
$ mkdir dir/subdir
$ touch dir/subdir/c.o
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? syntax
$ hg debugignore a.c
a.c is not ignored
$ hg debugignore dir/c.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)
Check using 'include:' in ignore file
$ hg purge --all --config extensions.purge=
$ touch foo.included
$ echo ".*.included" > otherignore
$ hg status -I "include:otherignore"
? foo.included
$ echo "include:otherignore" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? otherignore
Check recursive uses of 'include:'
$ echo "include:nested/ignore" >> otherignore
$ mkdir nested
$ echo "glob:*ignore" > nested/ignore
$ hg status
A dir/b.o
$ cp otherignore goodignore
$ echo "include:badignore" >> otherignore
$ hg status
skipping unreadable pattern file 'badignore': No such file or directory
A dir/b.o
$ mv goodignore otherignore
Check using 'include:' while in a non-root directory
$ cd ..
$ hg -R ignorerepo status
A dir/b.o
$ cd ignorerepo
Check including subincludes
$ hg revert -q --all
$ hg purge --all --config extensions.purge=
$ echo ".hgignore" > .hgignore
$ mkdir dir1 dir2
$ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
$ echo "subinclude:dir2/.hgignore" >> .hgignore
$ echo "glob:file*2" > dir2/.hgignore
$ hg status
? dir1/file1
? dir1/file2
? dir2/file1
Check including subincludes with regexs
$ echo "subinclude:dir1/.hgignore" >> .hgignore
$ echo "regexp:f.le1" > dir1/.hgignore
$ hg status
? dir1/file2
? dir2/file1
Check multiple levels of sub-ignores
$ mkdir dir1/subdir
$ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
$ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
$ echo "glob:subfil*3" >> dir1/subdir/.hgignore
$ hg status
? dir1/file2
? dir1/subdir/subfile4
? dir2/file1
Check include subignore at the same level
$ mv dir1/subdir/.hgignore dir1/.hgignoretwo
$ echo "regexp:f.le1" > dir1/.hgignore
$ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
$ echo "glob:file*2" > dir1/.hgignoretwo
$ hg status | grep file2
[1]
$ hg debugignore dir1/file2
dir1/file2 is ignored
(ignore rule in dir2/.hgignore, line 1: 'file*2')
#if windows
Windows paths are accepted on input
$ rm dir1/.hgignore
$ echo "dir1/file*" >> .hgignore
$ hg debugignore "dir1\file2"
dir1\file2 is ignored
(ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
$ hg up -qC .
#endif