phases: use revision number in new_heads
All graph operations will be done using revision numbers, so passing nodes only
means they will eventually get converted to revision numbers internally.
As part of an effort to align the code on using revision number we make the
`phases.newheads` function operated on revision number, taking them as input
and using them in returns, instead of the node-id it used to consume and
produce.
This is part of multiple changesets effort to translate more part of the logic,
but is done step by step to facilitate the identification of issue that might
arise in mercurial core and extensions.
To make the change simpler to handle for third party extensions, we also rename
the function, using a more modern form. This will help detecting the different
between the node-id version and the rev-num version.
I also take this as an opportunity to add some comment about possible
performance improvement for the future. They don't matter too much now, but they
are worse exploring in a while.
Test interactions between mq and patch.eol
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [diff]
> nodates = 1
> EOF
$ cat > makepatch.py <<EOF
> f = open('eol.diff', 'wb')
> w = f.write
> w(b'test message\n')
> w(b'diff --git a/a b/a\n')
> w(b'--- a/a\n')
> w(b'+++ b/a\n')
> w(b'@@ -1,5 +1,5 @@\n')
> w(b' a\n')
> w(b'-b\r\n')
> w(b'+y\r\n')
> w(b' c\r\n')
> w(b' d\n')
> w(b'-e\n')
> w(b'\\\\ No newline at end of file\n')
> w(b'+z\r\n')
> w(b'\\\\ No newline at end of file\r\n')
> EOF
$ cat > cateol.py <<EOF
> import sys
> try:
> stdout = sys.stdout.buffer
> except AttributeError:
> stdout = sys.stdout
> for line in open(sys.argv[1], 'rb'):
> line = line.replace(b'\r', b'<CR>')
> line = line.replace(b'\n', b'<LF>')
> stdout.write(line + b'\n')
> EOF
$ hg init repo
$ cd repo
$ echo '\.diff' > .hgignore
$ echo '\.rej' >> .hgignore
Test different --eol values
$ "$PYTHON" -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")'
$ hg ci -Am adda
adding .hgignore
adding a
$ "$PYTHON" ../makepatch.py
$ hg qimport eol.diff
adding eol.diff to series file
should fail in strict mode
$ hg qpush
applying eol.diff
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
invalid eol
$ hg --config patch.eol='LFCR' qpush
applying eol.diff
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
force LF
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ hg qrefresh
$ "$PYTHON" ../cateol.py .hg/patches/eol.diff
# HG changeset patch<LF>
# Parent 0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
test message<LF>
<LF>
diff -r 0d0bf99a8b7a a<LF>
--- a/a<LF>
+++ b/a<LF>
@@ -1,5 +1,5 @@<LF>
-a<LF>
-b<LF>
-c<LF>
-d<LF>
-e<LF>
\ No newline at end of file<LF>
+a<CR><LF>
+y<CR><LF>
+c<CR><LF>
+d<CR><LF>
+z<LF>
\ No newline at end of file<LF>
$ "$PYTHON" ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again forcing LF and compare revisions
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ "$PYTHON" ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again without LF and compare revisions
$ hg qpush
applying eol.diff
now at: eol.diff
$ "$PYTHON" ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
$ cd ..
Test .rej file EOL are left unchanged
$ hg init testeol
$ cd testeol
$ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')"
$ hg ci -Am adda
adding a
$ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')"
$ hg qnew patch1
$ hg qpop
popping patch1
patch queue now empty
$ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')"
$ hg ci -m changea
$ hg --config 'patch.eol=LF' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ hg --config 'patch.eol=auto' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ cd ..