merge: introduce new format for the state file
This new format will allow us to address common bugs while doing special merge
(graft, backout, rebaseā¦) and record user choice during conflict resolution.
The format is open so we can add more record for future usage.
This file still store hexified version of node to help human willing to debug
it by hand. The overhead or oversize are not expected be an issue.
The old format is still used. It will be written to disk along side the newer
format. And at parse time we detect if the data from old version of the
mergestate are different from the one in the new version file. If its the same,
both have most likely be written at the same time and you can trust the extra
data from the new file. If it differs, the old file have been written by an
older version of mercurial that did not knew about the new file. In that case we
use the content of the old file.
# dagparser.py - parser and generator for concise description of DAGs
#
# Copyright 2010 Peter Arrenbrecht <peter@arrenbrecht.ch>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import re, string
import util
from i18n import _
def parsedag(desc):
'''parses a DAG from a concise textual description; generates events
"+n" is a linear run of n nodes based on the current default parent
"." is a single node based on the current default parent
"$" resets the default parent to -1 (implied at the start);
otherwise the default parent is always the last node created
"<p" sets the default parent to the backref p
"*p" is a fork at parent p, where p is a backref
"*p1/p2/.../pn" is a merge of parents p1..pn, where the pi are backrefs
"/p2/.../pn" is a merge of the preceding node and p2..pn
":name" defines a label for the preceding node; labels can be redefined
"@text" emits an annotation event for text
"!command" emits an action event for the current node
"!!my command\n" is like "!", but to the end of the line
"#...\n" is a comment up to the end of the line
Whitespace between the above elements is ignored.
A backref is either
* a number n, which references the node curr-n, where curr is the current
node, or
* the name of a label you placed earlier using ":name", or
* empty to denote the default parent.
All string valued-elements are either strictly alphanumeric, or must
be enclosed in double quotes ("..."), with "\" as escape character.
Generates sequence of
('n', (id, [parentids])) for node creation
('l', (id, labelname)) for labels on nodes
('a', text) for annotations
('c', command) for actions (!)
('C', command) for line actions (!!)
Examples
--------
Example of a complex graph (output not shown for brevity):
>>> len(list(parsedag("""
...
... +3 # 3 nodes in linear run
... :forkhere # a label for the last of the 3 nodes from above
... +5 # 5 more nodes on one branch
... :mergethis # label again
... <forkhere # set default parent to labeled fork node
... +10 # 10 more nodes on a parallel branch
... @stable # following nodes will be annotated as "stable"
... +5 # 5 nodes in stable
... !addfile # custom command; could trigger new file in next node
... +2 # two more nodes
... /mergethis # merge last node with labeled node
... +4 # 4 more nodes descending from merge node
...
... """)))
34
Empty list:
>>> list(parsedag(""))
[]
A simple linear run:
>>> list(parsedag("+3"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
Some non-standard ways to define such runs:
>>> list(parsedag("+1+2"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
>>> list(parsedag("+1*1*"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
>>> list(parsedag("*"))
[('n', (0, [-1]))]
>>> list(parsedag("..."))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
A fork and a join, using numeric back references:
>>> list(parsedag("+2*2*/2"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))]
>>> list(parsedag("+2<2+1/2"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))]
Placing a label:
>>> list(parsedag("+1 :mylabel +1"))
[('n', (0, [-1])), ('l', (0, 'mylabel')), ('n', (1, [0]))]
An empty label (silly, really):
>>> list(parsedag("+1:+1"))
[('n', (0, [-1])), ('l', (0, '')), ('n', (1, [0]))]
Fork and join, but with labels instead of numeric back references:
>>> list(parsedag("+1:f +1:p2 *f */p2"))
[('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')),
('n', (2, [0])), ('n', (3, [2, 1]))]
>>> list(parsedag("+1:f +1:p2 <f +1 /p2"))
[('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')),
('n', (2, [0])), ('n', (3, [2, 1]))]
Restarting from the root:
>>> list(parsedag("+1 $ +1"))
[('n', (0, [-1])), ('n', (1, [-1]))]
Annotations, which are meant to introduce sticky state for subsequent nodes:
>>> list(parsedag("+1 @ann +1"))
[('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))]
>>> list(parsedag('+1 @"my annotation" +1'))
[('n', (0, [-1])), ('a', 'my annotation'), ('n', (1, [0]))]
Commands, which are meant to operate on the most recently created node:
>>> list(parsedag("+1 !cmd +1"))
[('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))]
>>> list(parsedag('+1 !"my command" +1'))
[('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))]
>>> list(parsedag('+1 !!my command line\\n +1'))
[('n', (0, [-1])), ('C', 'my command line'), ('n', (1, [0]))]
Comments, which extend to the end of the line:
>>> list(parsedag('+1 # comment\\n+1'))
[('n', (0, [-1])), ('n', (1, [0]))]
Error:
>>> try: list(parsedag('+1 bad'))
... except Exception, e: print e
invalid character in dag description: bad...
'''
if not desc:
return
wordchars = string.ascii_letters + string.digits
labels = {}
p1 = -1
r = 0
def resolve(ref):
if not ref:
return p1
elif ref[0] in string.digits:
return r - int(ref)
else:
return labels[ref]
chiter = (c for c in desc)
def nextch():
try:
return chiter.next()
except StopIteration:
return '\0'
def nextrun(c, allow):
s = ''
while c in allow:
s += c
c = nextch()
return c, s
def nextdelimited(c, limit, escape):
s = ''
while c != limit:
if c == escape:
c = nextch()
s += c
c = nextch()
return nextch(), s
def nextstring(c):
if c == '"':
return nextdelimited(nextch(), '"', '\\')
else:
return nextrun(c, wordchars)
c = nextch()
while c != '\0':
while c in string.whitespace:
c = nextch()
if c == '.':
yield 'n', (r, [p1])
p1 = r
r += 1
c = nextch()
elif c == '+':
c, digs = nextrun(nextch(), string.digits)
n = int(digs)
for i in xrange(0, n):
yield 'n', (r, [p1])
p1 = r
r += 1
elif c in '*/':
if c == '*':
c = nextch()
c, pref = nextstring(c)
prefs = [pref]
while c == '/':
c, pref = nextstring(nextch())
prefs.append(pref)
ps = [resolve(ref) for ref in prefs]
yield 'n', (r, ps)
p1 = r
r += 1
elif c == '<':
c, ref = nextstring(nextch())
p1 = resolve(ref)
elif c == ':':
c, name = nextstring(nextch())
labels[name] = p1
yield 'l', (p1, name)
elif c == '@':
c, text = nextstring(nextch())
yield 'a', text
elif c == '!':
c = nextch()
if c == '!':
cmd = ''
c = nextch()
while c not in '\n\r\0':
cmd += c
c = nextch()
yield 'C', cmd
else:
c, cmd = nextstring(c)
yield 'c', cmd
elif c == '#':
while c not in '\n\r\0':
c = nextch()
elif c == '$':
p1 = -1
c = nextch()
elif c == '\0':
return # in case it was preceded by whitespace
else:
s = ''
i = 0
while c != '\0' and i < 10:
s += c
i += 1
c = nextch()
raise util.Abort(_('invalid character in dag description: '
'%s...') % s)
def dagtextlines(events,
addspaces=True,
wraplabels=False,
wrapannotations=False,
wrapcommands=False,
wrapnonlinear=False,
usedots=False,
maxlinewidth=70):
'''generates single lines for dagtext()'''
def wrapstring(text):
if re.match("^[0-9a-z]*$", text):
return text
return '"' + text.replace('\\', '\\\\').replace('"', '\"') + '"'
def gen():
labels = {}
run = 0
wantr = 0
needroot = False
for kind, data in events:
if kind == 'n':
r, ps = data
# sanity check
if r != wantr:
raise util.Abort(_("expected id %i, got %i") % (wantr, r))
if not ps:
ps = [-1]
else:
for p in ps:
if p >= r:
raise util.Abort(_("parent id %i is larger than "
"current id %i") % (p, r))
wantr += 1
# new root?
p1 = r - 1
if len(ps) == 1 and ps[0] == -1:
if needroot:
if run:
yield '+' + str(run)
run = 0
if wrapnonlinear:
yield '\n'
yield '$'
p1 = -1
else:
needroot = True
if len(ps) == 1 and ps[0] == p1:
if usedots:
yield "."
else:
run += 1
else:
if run:
yield '+' + str(run)
run = 0
if wrapnonlinear:
yield '\n'
prefs = []
for p in ps:
if p == p1:
prefs.append('')
elif p in labels:
prefs.append(labels[p])
else:
prefs.append(str(r - p))
yield '*' + '/'.join(prefs)
else:
if run:
yield '+' + str(run)
run = 0
if kind == 'l':
rid, name = data
labels[rid] = name
yield ':' + name
if wraplabels:
yield '\n'
elif kind == 'c':
yield '!' + wrapstring(data)
if wrapcommands:
yield '\n'
elif kind == 'C':
yield '!!' + data
yield '\n'
elif kind == 'a':
if wrapannotations:
yield '\n'
yield '@' + wrapstring(data)
elif kind == '#':
yield '#' + data
yield '\n'
else:
raise util.Abort(_("invalid event type in dag: %s")
% str((type, data)))
if run:
yield '+' + str(run)
line = ''
for part in gen():
if part == '\n':
if line:
yield line
line = ''
else:
if len(line) + len(part) >= maxlinewidth:
yield line
line = ''
elif addspaces and line and part != '.':
line += ' '
line += part
if line:
yield line
def dagtext(dag,
addspaces=True,
wraplabels=False,
wrapannotations=False,
wrapcommands=False,
wrapnonlinear=False,
usedots=False,
maxlinewidth=70):
'''generates lines of a textual representation for a dag event stream
events should generate what parsedag() does, so:
('n', (id, [parentids])) for node creation
('l', (id, labelname)) for labels on nodes
('a', text) for annotations
('c', text) for commands
('C', text) for line commands ('!!')
('#', text) for comment lines
Parent nodes must come before child nodes.
Examples
--------
Linear run:
>>> dagtext([('n', (0, [-1])), ('n', (1, [0]))])
'+2'
Two roots:
>>> dagtext([('n', (0, [-1])), ('n', (1, [-1]))])
'+1 $ +1'
Fork and join:
>>> dagtext([('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])),
... ('n', (3, [2, 1]))])
'+2 *2 */2'
Fork and join with labels:
>>> dagtext([('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])),
... ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))])
'+1 :f +1 :p2 *f */p2'
Annotations:
>>> dagtext([('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))])
'+1 @ann +1'
>>> dagtext([('n', (0, [-1])),
... ('a', 'my annotation'),
... ('n', (1, [0]))])
'+1 @"my annotation" +1'
Commands:
>>> dagtext([('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))])
'+1 !cmd +1'
>>> dagtext([('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))])
'+1 !"my command" +1'
>>> dagtext([('n', (0, [-1])),
... ('C', 'my command line'),
... ('n', (1, [0]))])
'+1 !!my command line\\n+1'
Comments:
>>> dagtext([('n', (0, [-1])), ('#', ' comment'), ('n', (1, [0]))])
'+1 # comment\\n+1'
>>> dagtext([])
''
Combining parsedag and dagtext:
>>> dagtext(parsedag('+1 :f +1 :p2 *f */p2'))
'+1 :f +1 :p2 *f */p2'
'''
return "\n".join(dagtextlines(dag,
addspaces,
wraplabels,
wrapannotations,
wrapcommands,
wrapnonlinear,
usedots,
maxlinewidth))