phases: rework the logic of _pushdiscoveryphase to bound complexity
This rework the various graph traversal in _pushdiscoveryphase to keep the
complexity in check.
This is done though a couple of things:
- first, limiting the space we have to explore, for example, if we are not in
publishing push, we don't need to consider remote draft roots that are also
draft locally, as there is nothing to be moved there.
- avoid unbounded descendant computation, and use the faster "rev between"
computation.
This provide a massive boost to performance when exchanging with repository with
a massive amount of draft, like mozilla-try:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 20.346590 seconds
after: 11.232059 seconds (-38.15%, -7.48 seconds)
## benchmark.variants.revs = any-100-extra-rev
before: 24.752051 seconds
after: 15.367412 seconds (-37.91%, -9.38 seconds)
After this changes, the push operation is still quite too slow. Some of this
can be attributed to general phases slowness (reading all the roots from disk
for example) and other know slowness (not using persistent-nodemap, branchmap,
tags, etc. We are also working on them, but with this series, phase discovery
during push no longer showing up in profile and this is a pretty nice and bit
low-hanging fruit out of the way.
### (same case as the above)
# benchmark.variants.revs = any-1-extra-rev
pre-%ln-change: 44.235070
this-changeset: 11.232059 seconds (-74.61%, -33.00 seconds)
# benchmark.variants.revs = any-100-extra-rev
pre-%ln-change: 49.234697
this-changeset: 15.367412 seconds (-68.79%, -33.87 seconds)
Note that with this change, the `hg push` performance is now much closer to the
`hg pull` performance, even it still lagging behind a bit. (and the overall
performance are still too slow).
### data-env-vars.name = mozilla-try-2023-03-22-ds2-pnm
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
# bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 6.517450
hg.command.push: 11.219888
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 10.160991
hg.command.push: 14.251107
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.577772
hg.command.push: 11.232059
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.152976
hg.command.push: 15.367412
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.731982
hg.command.push: 11.178751
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.184236
hg.command.push: 15.620843
$ cat >> fakepager.py <<EOF
> import sys
> printed = False
> for line in sys.stdin:
> sys.stdout.write('paged! %r\n' % line)
> printed = True
> if not printed:
> sys.stdout.write('paged empty output!\n')
> EOF
Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
$ cat >> $HGRCPATH <<EOF
> [ui]
> formatted = yes
> color = no
> [pager]
> pager = "$PYTHON" $TESTTMP/fakepager.py
> EOF
$ hg init repo
$ cd repo
$ echo a >> a
$ hg add a
$ hg ci -m 'add a'
$ for x in `"$PYTHON" $TESTDIR/seq.py 1 10`; do
> echo a $x >> a
> hg ci -m "modify a $x"
> done
By default diff and log are paged, but id is not:
$ hg diff -c 2 --pager=yes
paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
paged! '@@ -1,2 +1,3 @@\n'
paged! ' a\n'
paged! ' a 1\n'
paged! '+a 2\n'
$ hg log --limit 2
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
paged! 'changeset: 9:6dd8ea7dd621\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 9\n'
paged! '\n'
$ hg id
46106edeeb38 tip
We can control the pager from the config
$ hg log --limit 1 --config 'ui.paginate=False'
changeset: 10:46106edeeb38
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
$ hg log --limit 1 --config 'ui.paginate=0'
changeset: 10:46106edeeb38
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
$ hg log --limit 1 --config 'ui.paginate=1'
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
explicit --pager=on should take precedence over other configurations
(issue5580)
$ cat >> $HGRCPATH <<EOF
> [ui]
> paginate = false
> EOF
$ hg log --limit 1 --pager=on
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
$ cat >> $HGRCPATH <<EOF
> [ui]
> # true is default value of ui.paginate
> paginate = true
> EOF
$ hg log --limit 1 --pager=off
changeset: 10:46106edeeb38
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
We can enable the pager on id:
BROKEN: should be paged
$ hg --config pager.attend-id=yes id
46106edeeb38 tip
Setting attend-$COMMAND to a false value works, even with pager in
core:
$ hg --config pager.attend-diff=no diff -c 2
diff -r f4be7687d414 -r bce265549556 a
--- a/a Thu Jan 01 00:00:00 1970 +0000
+++ b/a Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +1,3 @@
a
a 1
+a 2
Command aliases should have same behavior as main command
$ hg history --limit 2
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
paged! 'changeset: 9:6dd8ea7dd621\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 9\n'
paged! '\n'
Abbreviated command alias should also be paged
$ hg hist -l 1
paged! 'changeset: 10:46106edeeb38\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
Attend for an abbreviated command does not work
$ hg --config pager.attend-ident=true ident
46106edeeb38 tip
$ hg --config extensions.pager= --config pager.attend-ident=true ident
46106edeeb38 tip
Pager should not start if stdout is not a tty.
$ hg log -l1 -q --config ui.formatted=False
10:46106edeeb38
Pager should be disabled if pager.pager is empty (otherwise the output would
be silently lost.)
$ hg log -l1 -q --config pager.pager=
10:46106edeeb38
Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
$ cat >> $HGRCPATH <<EOF
> [ui]
> color = always
> [color]
> mode = ansi
> EOF
$ hg log --limit 3
paged! '\x1b[0;33mchangeset: 10:46106edeeb38\x1b[0m\n'
paged! 'tag: tip\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 10\n'
paged! '\n'
paged! '\x1b[0;33mchangeset: 9:6dd8ea7dd621\x1b[0m\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 9\n'
paged! '\n'
paged! '\x1b[0;33mchangeset: 8:cff05a6312fe\x1b[0m\n'
paged! 'user: test\n'
paged! 'date: Thu Jan 01 00:00:00 1970 +0000\n'
paged! 'summary: modify a 8\n'
paged! '\n'
#if no-chg
An invalid pager command name is reported sensibly if we don't have to
use shell=True in the subprocess call:
$ hg log --limit 3 --config pager.pager=this-command-better-never-exist
missing pager command 'this-command-better-never-exist', skipping pager
\x1b[0;33mchangeset: 10:46106edeeb38\x1b[0m (esc)
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 10
\x1b[0;33mchangeset: 9:6dd8ea7dd621\x1b[0m (esc)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 9
\x1b[0;33mchangeset: 8:cff05a6312fe\x1b[0m (esc)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify a 8
#endif
A complicated pager command gets worse behavior. Bonus points if you can
improve this. Windows apparently does this better, but only sometimes?
#if windows
$ hg log --limit 3 \
> --config pager.pager='this-command-better-never-exist --seriously' \
> 2>/dev/null || true
\x1b[0;33mchangeset: 10:46106edeeb38\x1b[0m (esc) (?)
tag: tip (?)
user: test (?)
date: Thu Jan 01 00:00:00 1970 +0000 (?)
summary: modify a 10 (?)
(?)
\x1b[0;33mchangeset: 9:6dd8ea7dd621\x1b[0m (esc) (?)
user: test (?)
date: Thu Jan 01 00:00:00 1970 +0000 (?)
summary: modify a 9 (?)
(?)
\x1b[0;33mchangeset: 8:cff05a6312fe\x1b[0m (esc) (?)
user: test (?)
date: Thu Jan 01 00:00:00 1970 +0000 (?)
summary: modify a 8 (?)
(?)
#else
$ hg log --limit 3 \
> --config pager.pager='this-command-better-never-exist --seriously' \
> 2>/dev/null || true
#endif
Pager works with shell aliases.
$ cat >> $HGRCPATH <<EOF
> [alias]
> echoa = !echo a
> EOF
$ hg echoa
a
BROKEN: should be paged
$ hg --config pager.attend-echoa=yes echoa
a
Pager works with hg aliases including environment variables.
$ cat >> $HGRCPATH <<'EOF'
> [alias]
> printa = log -T "$A\n" -r 0
> EOF
$ A=1 hg --config pager.attend-printa=yes printa
paged! '1\n'
$ A=2 hg --config pager.attend-printa=yes printa
paged! '2\n'
Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
$ A=2 hg --config pager.attend-printa=yes printa --pager=no
2
Pager should not override the exit code of other commands
$ cat >> $TESTTMP/fortytwo.py <<'EOF'
> from mercurial import commands, registrar
> cmdtable = {}
> command = registrar.command(cmdtable)
> @command(b'fortytwo', [], b'fortytwo', norepo=True)
> def fortytwo(ui, *opts):
> ui.write(b'42\n')
> return 42
> EOF
$ cat >> $HGRCPATH <<'EOF'
> [extensions]
> fortytwo = $TESTTMP/fortytwo.py
> EOF
$ hg fortytwo --pager=on
paged! '42\n'
[42]
A command that asks for paging using ui.pager() directly works:
$ hg blame a
paged! ' 0: a\n'
paged! ' 1: a 1\n'
paged! ' 2: a 2\n'
paged! ' 3: a 3\n'
paged! ' 4: a 4\n'
paged! ' 5: a 5\n'
paged! ' 6: a 6\n'
paged! ' 7: a 7\n'
paged! ' 8: a 8\n'
paged! ' 9: a 9\n'
paged! '10: a 10\n'
but not with HGPLAIN
$ HGPLAIN=1 hg blame a
0: a
1: a 1
2: a 2
3: a 3
4: a 4
5: a 5
6: a 6
7: a 7
8: a 8
9: a 9
10: a 10
explicit flags work too:
$ hg blame --pager=no a
0: a
1: a 1
2: a 2
3: a 3
4: a 4
5: a 5
6: a 6
7: a 7
8: a 8
9: a 9
10: a 10
A command with --output option:
$ hg cat -r0 a
paged! 'a\n'
$ hg cat -r0 a --output=-
paged! 'a\n'
$ hg cat -r0 a --output=out
$ hg export -r0
paged! '# HG changeset patch\n'
paged! '# User test\n'
paged! '# Date 0 0\n'
paged! '# Thu Jan 01 00:00:00 1970 +0000\n'
paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
paged! '# Parent 0000000000000000000000000000000000000000\n'
paged! 'add a\n'
paged! '\n'
paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
paged! '\x1b[0;32m+a\x1b[0m\n'
$ hg export -r0 -o -
paged! '# HG changeset patch\n'
paged! '# User test\n'
paged! '# Date 0 0\n'
paged! '# Thu Jan 01 00:00:00 1970 +0000\n'
paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
paged! '# Parent 0000000000000000000000000000000000000000\n'
paged! 'add a\n'
paged! '\n'
paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
paged! '\x1b[0;32m+a\x1b[0m\n'
$ hg export -r0 -o out
$ rm out
Put annotate in the ignore list for pager:
$ cat >> $HGRCPATH <<EOF
> [pager]
> ignore = annotate
> EOF
$ hg blame a
0: a
1: a 1
2: a 2
3: a 3
4: a 4
5: a 5
6: a 6
7: a 7
8: a 8
9: a 9
10: a 10
During pushbuffer, pager should not start:
$ cat > $TESTTMP/pushbufferpager.py <<EOF
> def uisetup(ui):
> ui.pushbuffer()
> ui.pager(b'mycmd')
> ui.write(b'content\n')
> ui.write(ui.popbuffer())
> EOF
$ echo append >> a
$ hg --config extensions.pushbuffer=$TESTTMP/pushbufferpager.py status --color=off
content
paged! 'M a\n'
Environment variables like LESS and LV are set automatically:
$ cat > $TESTTMP/printlesslv.py <<EOF
> import os
> import sys
> sys.stdin.read()
> for name in ['LESS', 'LV']:
> sys.stdout.write(('%s=%s\n') % (name, os.environ.get(name, '-')))
> sys.stdout.flush()
> EOF
$ cat >> $HGRCPATH <<EOF
> [alias]
> noop = log -r 0 -T ''
> [ui]
> formatted=1
> [pager]
> pager = "$PYTHON" $TESTTMP/printlesslv.py
> EOF
$ unset LESS
$ unset LV
$ hg noop --pager=on
LESS=FRX
LV=-c
$ LESS=EFGH hg noop --pager=on
LESS=EFGH
LV=-c