phases: rework the logic of _pushdiscoveryphase to bound complexity This rework the various graph traversal in _pushdiscoveryphase to keep the complexity in check. This is done though a couple of things: - first, limiting the space we have to explore, for example, if we are not in publishing push, we don't need to consider remote draft roots that are also draft locally, as there is nothing to be moved there. - avoid unbounded descendant computation, and use the faster "rev between" computation. This provide a massive boost to performance when exchanging with repository with a massive amount of draft, like mozilla-try: ### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog # benchmark.name = hg.command.push # bin-env-vars.hg.flavor = default # bin-env-vars.hg.py-re2-module = default # benchmark.variants.explicit-rev = all-out-heads # benchmark.variants.issue6528 = disabled # benchmark.variants.protocol = ssh # benchmark.variants.reuse-external-delta-parent = default ## benchmark.variants.revs = any-1-extra-rev before: 20.346590 seconds after: 11.232059 seconds (-38.15%, -7.48 seconds) ## benchmark.variants.revs = any-100-extra-rev before: 24.752051 seconds after: 15.367412 seconds (-37.91%, -9.38 seconds) After this changes, the push operation is still quite too slow. Some of this can be attributed to general phases slowness (reading all the roots from disk for example) and other know slowness (not using persistent-nodemap, branchmap, tags, etc. We are also working on them, but with this series, phase discovery during push no longer showing up in profile and this is a pretty nice and bit low-hanging fruit out of the way. ### (same case as the above) # benchmark.variants.revs = any-1-extra-rev pre-%ln-change: 44.235070 this-changeset: 11.232059 seconds (-74.61%, -33.00 seconds) # benchmark.variants.revs = any-100-extra-rev pre-%ln-change: 49.234697 this-changeset: 15.367412 seconds (-68.79%, -33.87 seconds) Note that with this change, the `hg push` performance is now much closer to the `hg pull` performance, even it still lagging behind a bit. (and the overall performance are still too slow). ### data-env-vars.name = mozilla-try-2023-03-22-ds2-pnm # benchmark.variants.explicit-rev = all-out-heads # benchmark.variants.issue6528 = disabled # benchmark.variants.protocol = ssh # benchmark.variants.pulled-delta-reuse-policy = default # bin-env-vars.hg.flavor = rust ## benchmark.variants.revs = any-1-extra-rev hg.command.pull: 6.517450 hg.command.push: 11.219888 ## benchmark.variants.revs = any-100-extra-rev hg.command.pull: 10.160991 hg.command.push: 14.251107 ### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog # bin-env-vars.hg.py-re2-module = default # benchmark.variants.explicit-rev = all-out-heads # benchmark.variants.issue6528 = disabled # benchmark.variants.protocol = ssh # benchmark.variants.pulled-delta-reuse-policy = default ## bin-env-vars.hg.flavor = default ## benchmark.variants.revs = any-1-extra-rev hg.command.pull: 8.577772 hg.command.push: 11.232059 ## bin-env-vars.hg.flavor = default ## benchmark.variants.revs = any-100-extra-rev hg.command.pull: 13.152976 hg.command.push: 15.367412 ## bin-env-vars.hg.flavor = rust ## benchmark.variants.revs = any-1-extra-rev hg.command.pull: 8.731982 hg.command.push: 11.178751 ## bin-env-vars.hg.flavor = rust ## benchmark.variants.revs = any-100-extra-rev hg.command.pull: 13.184236 hg.command.push: 15.620843

  $ cat > makepatch.py <<EOF
  > import sys
  > f = open(sys.argv[2], 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-bbb\r\n')
  > w(b'+yyyy\r\n')
  > w(b' cc\r\n')
  > w({'empty:lf': b' \n',
  >    'empty:crlf': b' \r\n',
  >    'empty:stripped-lf': b'\n',
  >    'empty:stripped-crlf': b'\r\n'}[sys.argv[1]])
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\\\\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\\\\ No newline at end of file\r\n')
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nbbb\ncc\n\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py empty:lf eol.diff
  $ "$PYTHON" ../makepatch.py empty:crlf eol-empty-crlf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-lf eol-empty-stripped-lf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-crlf eol-empty-stripped-crlf.diff

invalid eol

  $ hg --config patch.eol='LFCR' import eol.diff
  applying eol.diff
  abort: unsupported line endings type: LFCR
  [255]
  $ hg revert -a


force LF

  $ hg --traceback --config patch.eol='LF' import eol.diff
  applying eol.diff
  $ hg id
  9e4ef7b3d4af tip
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st

 (test empty-line variants: all of them should generate the same revision)

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-crlf.diff
  applying eol-empty-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-lf.diff
  applying eol-empty-stripped-lf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-crlf.diff
  applying eol-empty-stripped-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

force CRLF

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='CRLF' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on LF file

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st


auto EOL on CRLF file

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\r\nbbb\r\ncc\r\n\r\nd\r\ne")'
  $ hg commit -m 'switch EOLs in a'
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on new file or source without any EOL

  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol")'
  $ hg add noeol
  $ hg commit -m 'add noeol'
  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol\r\nnoeol\n")'
  $ "$PYTHON" -c 'open("neweol", "wb").write(b"neweol\nneweol\r\n")'
  $ hg add neweol
  $ hg diff --git > noeol.diff
  $ hg revert --no-backup noeol neweol
  $ rm neweol
  $ hg --traceback --config patch.eol='auto' import -m noeol noeol.diff
  applying noeol.diff
  $ cat noeol
  noeol\r (esc)
  noeol
  $ cat neweol
  neweol
  neweol\r (esc)
  $ hg st


Test --eol and binary patches

  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nb\r\nd")'
  $ hg ci -Am addb
  adding b
  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nc\r\nd")'
  $ hg diff --git > bin.diff
  $ hg revert --no-backup b

binary patch with --eol

  $ hg import --config patch.eol='CRLF' -m changeb bin.diff
  applying bin.diff
  $ cat b
  a\x00 (esc)
  c\r (esc)
  d (no-eol)
  $ hg st
  $ cd ..