phases: rework the logic of _pushdiscoveryphase to bound complexity
This rework the various graph traversal in _pushdiscoveryphase to keep the
complexity in check.
This is done though a couple of things:
- first, limiting the space we have to explore, for example, if we are not in
publishing push, we don't need to consider remote draft roots that are also
draft locally, as there is nothing to be moved there.
- avoid unbounded descendant computation, and use the faster "rev between"
computation.
This provide a massive boost to performance when exchanging with repository with
a massive amount of draft, like mozilla-try:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 20.346590 seconds
after: 11.232059 seconds (-38.15%, -7.48 seconds)
## benchmark.variants.revs = any-100-extra-rev
before: 24.752051 seconds
after: 15.367412 seconds (-37.91%, -9.38 seconds)
After this changes, the push operation is still quite too slow. Some of this
can be attributed to general phases slowness (reading all the roots from disk
for example) and other know slowness (not using persistent-nodemap, branchmap,
tags, etc. We are also working on them, but with this series, phase discovery
during push no longer showing up in profile and this is a pretty nice and bit
low-hanging fruit out of the way.
### (same case as the above)
# benchmark.variants.revs = any-1-extra-rev
pre-%ln-change: 44.235070
this-changeset: 11.232059 seconds (-74.61%, -33.00 seconds)
# benchmark.variants.revs = any-100-extra-rev
pre-%ln-change: 49.234697
this-changeset: 15.367412 seconds (-68.79%, -33.87 seconds)
Note that with this change, the `hg push` performance is now much closer to the
`hg pull` performance, even it still lagging behind a bit. (and the overall
performance are still too slow).
### data-env-vars.name = mozilla-try-2023-03-22-ds2-pnm
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
# bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 6.517450
hg.command.push: 11.219888
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 10.160991
hg.command.push: 14.251107
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.577772
hg.command.push: 11.232059
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.152976
hg.command.push: 15.367412
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.731982
hg.command.push: 11.178751
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.184236
hg.command.push: 15.620843
#require svn svn-bindings
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/branches.svndump"
Convert trunk and branches
$ cat > branchmap <<EOF
> old3 newbranch
>
>
> EOF
$ hg convert --branchmap=branchmap --datesort -r 10 svn-repo A-hg
initializing destination A-hg repository
scanning source...
sorting...
converting...
10 init projA
9 hello
8 branch trunk, remove c and dir
7 change a
6 change b
5 move and update c
4 move and update c
3 change b again
2 move to old2
1 move back to old
0 last change to a
Test template keywords
$ hg -R A-hg log --template '{rev} {svnuuid}{svnpath}@{svnrev}\n'
10 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@10
9 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@9
8 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old2@8
7 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@7
6 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@6
5 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@6
4 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@5
3 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@4
2 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@3
1 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@2
0 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@1
Convert again
$ hg convert --branchmap=branchmap --datesort svn-repo A-hg
scanning source...
sorting...
converting...
0 branch trunk@1 into old3
$ cd A-hg
$ hg log -G --template 'branch={branches} {rev} {desc|firstline} files: {files}\n'
o branch=newbranch 11 branch trunk@1 into old3 files:
|
| o branch= 10 last change to a files: a
| |
| | o branch=old 9 move back to old files:
| | |
| | o branch=old2 8 move to old2 files:
| | |
| | o branch=old 7 change b again files: b
| | |
| o | branch= 6 move and update c files: b
| | |
| | o branch=old 5 move and update c files: c
| | |
| | o branch=old 4 change b files: b
| | |
| o | branch= 3 change a files: a
| | |
| | o branch=old 2 branch trunk, remove c and dir files: c
| |/
| o branch= 1 hello files: a b c dir/e
|/
o branch= 0 init projA files:
$ hg branches
newbranch 11:a6d7cc050ad1
default 10:6e2b33404495
old 9:1b494af68c0b
old2 8:5be40b8dcbf6 (inactive)
$ hg tags -q
tip
$ cd ..
Test hg failing to call itself
$ HG=foobar hg convert svn-repo B-hg 2>&1 | grep abort
abort: Mercurial failed to run itself, check hg executable is in PATH
Convert 'trunk' to branch other than 'default'
$ cat > branchmap <<EOF
> default hgtrunk
>
>
> EOF
$ hg convert --branchmap=branchmap --datesort -r 10 svn-repo C-hg
initializing destination C-hg repository
scanning source...
sorting...
converting...
10 init projA
9 hello
8 branch trunk, remove c and dir
7 change a
6 change b
5 move and update c
4 move and update c
3 change b again
2 move to old2
1 move back to old
0 last change to a
$ cd C-hg
$ hg branches --template '{branch}\n'
hgtrunk
old
old2
$ cd ..