phases: rework the logic of _pushdiscoveryphase to bound complexity
This rework the various graph traversal in _pushdiscoveryphase to keep the
complexity in check.
This is done though a couple of things:
- first, limiting the space we have to explore, for example, if we are not in
publishing push, we don't need to consider remote draft roots that are also
draft locally, as there is nothing to be moved there.
- avoid unbounded descendant computation, and use the faster "rev between"
computation.
This provide a massive boost to performance when exchanging with repository with
a massive amount of draft, like mozilla-try:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 20.346590 seconds
after: 11.232059 seconds (-38.15%, -7.48 seconds)
## benchmark.variants.revs = any-100-extra-rev
before: 24.752051 seconds
after: 15.367412 seconds (-37.91%, -9.38 seconds)
After this changes, the push operation is still quite too slow. Some of this
can be attributed to general phases slowness (reading all the roots from disk
for example) and other know slowness (not using persistent-nodemap, branchmap,
tags, etc. We are also working on them, but with this series, phase discovery
during push no longer showing up in profile and this is a pretty nice and bit
low-hanging fruit out of the way.
### (same case as the above)
# benchmark.variants.revs = any-1-extra-rev
pre-%ln-change: 44.235070
this-changeset: 11.232059 seconds (-74.61%, -33.00 seconds)
# benchmark.variants.revs = any-100-extra-rev
pre-%ln-change: 49.234697
this-changeset: 15.367412 seconds (-68.79%, -33.87 seconds)
Note that with this change, the `hg push` performance is now much closer to the
`hg pull` performance, even it still lagging behind a bit. (and the overall
performance are still too slow).
### data-env-vars.name = mozilla-try-2023-03-22-ds2-pnm
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
# bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 6.517450
hg.command.push: 11.219888
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 10.160991
hg.command.push: 14.251107
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.577772
hg.command.push: 11.232059
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.152976
hg.command.push: 15.367412
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.731982
hg.command.push: 11.178751
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.184236
hg.command.push: 15.620843
$ hg init repo
$ cd repo
$ cat << EOF > a
> Small Mathematical Series.
> One
> Two
> Three
> Four
> Five
> Hop we are done.
> EOF
$ hg add a
$ hg commit -m ancestor
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 5
> Hop we are done.
> EOF
$ hg commit -m branch1
$ hg co 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 6
> 8
> Hop we are done.
> EOF
$ hg commit -m branch2
created new head
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg id
618808747361+c0c68e4fe667+ tip
$ echo "[commands]" >> $HGRCPATH
$ echo "status.verbose=true" >> $HGRCPATH
$ hg status
M a
? a.orig
# The repository is in an unfinished *merge* state.
# Unresolved merge conflicts:
#
# a
#
# To mark files as resolved: hg resolve --mark FILE
# To continue: hg commit
# To abort: hg merge --abort
$ hg status -Tjson
[
{
"itemtype": "file",
"path": "a",
"status": "M",
"unresolved": true
},
{
"itemtype": "file",
"path": "a.orig",
"status": "?"
},
{
"itemtype": "morestatus",
"unfinished": "merge",
"unfinishedmsg": "To continue: hg commit\nTo abort: hg merge --abort"
}
]
$ hg status -0
M a\x00? a.orig\x00 (no-eol) (esc)
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 618808747361 - test: branch2
6
8
=======
4
5
>>>>>>> merge rev: c0c68e4fe667 - test: branch1
Hop we are done.
$ hg status --config commands.status.verbose=0
M a
? a.orig
Verify custom conflict markers
$ hg up -q --clean .
$ cat <<EOF >> .hg/hgrc
> [command-templates]
> mergemarker = '{author} {rev}'
> EOF
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify custom conflict markers with legacy config name
$ hg up -q --clean .
$ cat <<EOF >> .hg/hgrc
> [ui]
> mergemarkertemplate = '{author} {rev}'
> EOF
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line splitting of custom conflict marker which causes multiple lines
$ hg up -q --clean .
$ cat >> .hg/hgrc <<EOF
> [command-templates]
> mergemarker={author} {rev}\nfoo\nbar\nbaz
> EOF
$ hg -q merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line trimming of custom conflict marker using multi-byte characters
$ hg up -q --clean .
$ "$PYTHON" <<EOF
> fp = open('logfile', 'wb')
> fp.write(b'12345678901234567890123456789012345678901234567890' +
> b'1234567890') # there are 5 more columns for 80 columns
>
> # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
> fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
>
> fp.close()
> EOF
$ hg add logfile
$ hg --encoding utf-8 commit --logfile logfile
$ cat >> .hg/hgrc <<EOF
> [command-templates]
> mergemarker={desc|firstline}
> EOF
$ hg -q --encoding utf-8 merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
6
8
=======
4
5
>>>>>>> merge rev: branch1
Hop we are done.
Verify basic conflict markers
$ hg up -q --clean 2
$ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy
6
8
=======
4
5
>>>>>>> merge rev
Hop we are done.
internal:merge3
$ hg up -q --clean .
$ hg merge 1 --tool internal:merge3
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
<<<<<<< working copy
1
2
3
6
8
||||||| common ancestor
One
Two
Three
Four
Five
=======
1
2
3
4
5
>>>>>>> merge rev
Hop we are done.
internal:mergediff
$ hg co -C 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 4.5
> 5
> Hop we are done.
> EOF
$ hg co -m 2 -t internal:mergediff
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<<
------- working copy parent
+++++++ working copy
4
+4.5
5
======= destination
6
8
>>>>>>>
Hop we are done.
Test the same thing as above but modify a bit more so we instead get the working
copy in full and the diff from base to destination.
$ hg co -C 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3.5
> 4.5
> 5.5
> Hop we are done.
> EOF
$ hg co -m 2 -t internal:mergediff
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges
[1]
$ cat a
Small Mathematical Series.
1
2
<<<<<<<
======= working copy
3.5
4.5
5.5
------- working copy parent
+++++++ destination
3
-4
-5
+6
+8
>>>>>>>
Hop we are done.
Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other
$ hg up -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
1 other heads for branch "default"
$ printf "\n\nEnd of file\n" >> a
$ hg ci -m "Add some stuff at the end"
$ hg up -r 1
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "Start of file\n\n\n" > tmp
$ cat a >> tmp
$ mv tmp a
$ hg ci -m "Add some stuff at the beginning"
Now test :merge-other and :merge-local
$ hg merge
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
1 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg resolve --tool :merge-other a
merging a
(no more unresolved files)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
6
8
Hop we are done.
End of file
$ hg up -C
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
updated to "18b51d585961: Add some stuff at the beginning"
1 other heads for branch "default"
$ hg merge --tool :merge-local
merging a
1 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
4
5
Hop we are done.
End of file