phases: rework the logic of _pushdiscoveryphase to bound complexity
This rework the various graph traversal in _pushdiscoveryphase to keep the
complexity in check.
This is done though a couple of things:
- first, limiting the space we have to explore, for example, if we are not in
publishing push, we don't need to consider remote draft roots that are also
draft locally, as there is nothing to be moved there.
- avoid unbounded descendant computation, and use the faster "rev between"
computation.
This provide a massive boost to performance when exchanging with repository with
a massive amount of draft, like mozilla-try:
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# benchmark.name = hg.command.push
# bin-env-vars.hg.flavor = default
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.reuse-external-delta-parent = default
## benchmark.variants.revs = any-1-extra-rev
before: 20.346590 seconds
after: 11.232059 seconds (-38.15%, -7.48 seconds)
## benchmark.variants.revs = any-100-extra-rev
before: 24.752051 seconds
after: 15.367412 seconds (-37.91%, -9.38 seconds)
After this changes, the push operation is still quite too slow. Some of this
can be attributed to general phases slowness (reading all the roots from disk
for example) and other know slowness (not using persistent-nodemap, branchmap,
tags, etc. We are also working on them, but with this series, phase discovery
during push no longer showing up in profile and this is a pretty nice and bit
low-hanging fruit out of the way.
### (same case as the above)
# benchmark.variants.revs = any-1-extra-rev
pre-%ln-change: 44.235070
this-changeset: 11.232059 seconds (-74.61%, -33.00 seconds)
# benchmark.variants.revs = any-100-extra-rev
pre-%ln-change: 49.234697
this-changeset: 15.367412 seconds (-68.79%, -33.87 seconds)
Note that with this change, the `hg push` performance is now much closer to the
`hg pull` performance, even it still lagging behind a bit. (and the overall
performance are still too slow).
### data-env-vars.name = mozilla-try-2023-03-22-ds2-pnm
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
# bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 6.517450
hg.command.push: 11.219888
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 10.160991
hg.command.push: 14.251107
### data-env-vars.name = mozilla-try-2023-03-22-zstd-sparse-revlog
# bin-env-vars.hg.py-re2-module = default
# benchmark.variants.explicit-rev = all-out-heads
# benchmark.variants.issue6528 = disabled
# benchmark.variants.protocol = ssh
# benchmark.variants.pulled-delta-reuse-policy = default
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.577772
hg.command.push: 11.232059
## bin-env-vars.hg.flavor = default
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.152976
hg.command.push: 15.367412
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-1-extra-rev
hg.command.pull: 8.731982
hg.command.push: 11.178751
## bin-env-vars.hg.flavor = rust
## benchmark.variants.revs = any-100-extra-rev
hg.command.pull: 13.184236
hg.command.push: 15.620843
Tests for the automv extension; detect moved files at commit time.
$ cat >> $HGRCPATH << EOF
> [extensions]
> automv=
> rebase=
> EOF
Setup repo
$ hg init repo
$ cd repo
Test automv command for commit
$ printf 'foo\nbar\nbaz\n' > a.txt
$ hg add a.txt
$ hg commit -m 'init repo with a'
mv/rm/add
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --config automv.similarity='60' -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit -m 'msg'
nothing changed (1 missing files, see 'hg status')
[1]
$ hg status -C
! a.txt
? b.txt
$ hg revert -aqC
$ rm b.txt
mv/rm/add/notincommitfiles
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg status -C
A b.txt
A c.txt
R a.txt
$ hg commit c.txt -m 'msg'
created new head
$ hg status --change . -C
A c.txt
$ hg status -C
A b.txt
R a.txt
$ hg up -r 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg rm a.txt
$ echo 'bar' > c.txt
$ hg add c.txt
$ hg commit -m 'msg'
detected move of 1 files
created new head
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --no-automv -m 'msg'
created new head
$ hg status --change . -C
A b.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
Test automv command for commit --amend
mv/rm/add
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/add/modif/changethreshold
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ printf '\nfoo\n' >> b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend --config automv.similarity='60' -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg status -C
! a.txt
? b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status -C
! a.txt
? b.txt
$ hg up -Cr 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
mv/rm/add/notincommitfiles
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ echo 'bar' > d.txt
$ hg add d.txt
$ hg status -C
A b.txt
A d.txt
R a.txt
$ hg commit --amend -m 'amended' d.txt
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A c.txt
A d.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended'
detected move of 1 files
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
a.txt
A c.txt
A d.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 3 files removed, 0 files unresolved
mv/rm/add/--no-automv
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg add b.txt
$ hg status -C
A b.txt
R a.txt
$ hg commit --amend -m 'amended' --no-automv
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
A c.txt
R a.txt
$ hg up -r 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
mv/rm/commit/add/amend
$ echo 'c' > c.txt
$ hg add c.txt
$ hg commit -m 'revision to amend to'
created new head
$ mv a.txt b.txt
$ hg rm a.txt
$ hg status -C
R a.txt
? b.txt
$ hg commit -m "removed a"
$ hg add b.txt
$ hg commit --amend -m 'amended'
saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend.hg (glob)
$ hg status --change . -C
A b.txt
R a.txt
error conditions
$ cat >> $HGRCPATH << EOF
> [automv]
> similarity=110
> EOF
$ hg commit -m 'revision to amend to'
abort: automv.similarity must be between 0 and 100
[255]