annotate: increase refcount of each revisions correctly (issue3841) Before this patch, refcount (managed in "needed") of parents of each revisions in "visit" is increased, only when parent is not annotated yet (examined by "p not in hist"). But this causes less refcount of the revision like "A" in the tree below ("A" is assumed as the second parent of "C"): A --- B --- C \ / \-----/ Steps of annotation for "C" in this case are shown below: 1. for "C" 1.1 increase refcount of "B" 1.2 increase refcount of "A" (=> 1) 1.3 defer annotation for "C" 2. for "A" 2.1 annotate for "A" (=> put result into "hist[A]") 2.2 clear "pcache[A]" ("pcache[A] = []") 3. for "B" 3.1 not increase refcount of "A", because "A not in hist" is False 3.2 annotate for "B" 3.3 decrease refcount of "A" (=> 0) 3.4 delete "hist[A]", even though "A" is still needed by "C" 3.5 clear "pcache[B]" 4. for "C", again 4.1 not increase refcount of "B", because "B not in hist" is False 4.2 increase refcount of "A" (=> 1) 4.3 defer annotation for "C" 5. for "A", again 5.1 annotate for "A" (=> put result into "hist[A]", again) 5.2 clear "pcache[A]" 6. for "C", once again 6.1 not increase refcount of "B", because "B not in hist" is False 6.2 not increase refcount of "A", because "A not in hist" is False 6.3 annotate for "C" 6.4 decrease refcount of "A", and delete "hist[A]" 6.5 decrease refcount of "B", and delete "hist[B]" 6.6 clear "pcache[C]" At step (5.1), annotation for "A" mis-recognizes that all lines are created at "A", because "pcache[A]" already cleared at step (2.2) prevents from scanning ancestors of "A". So, annotation for "C" or its descendants loses information about "A" or its ancestors. The root cause of this problem is that refcount of "A" is decreased at step (3.3), even though it isn't increased at step (3.1). To increase refcount correctly, this patch increases refcount of each parents of each revisions: - regardless of "p not in hist" or not, and - only once for each revisions in "visit" (by "not pcached") In fact, this problem should occur only on legacy repositories in which a filelog includes the merging between the revision and its ancestor (as the second parent), because: - tree is scanned in depth-first without such merging, revisions in "visit" refer different revisions as parent each other - recent Mercurial doesn't allow such merging changelog and manifest can include such merging someway, but filelogs can't, because "localrepository._filecommit()" converts such merging request to linear history. This patch tests merging cases below: these cases are from filelog of "mercurial/commands.py" in the repository of Mercurial itself. - both parents are same 10 --- 11 --- 12 \_/ filelogrev: changesetid: 10 00ea3613f82c 11 fc4a6e5b5812 12 4f802588cdfb - the second parent is also ancestor of the first one 37 --- 38 --- 39 --- 40 \________/ filelogrev: changesetid: 37 f8d56da6ac8f 38 38919e1c254d 39 d3400605d246 40 f06a4a3b86a7

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > graphlog=
  > rebase=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a

  $ echo C1 > C1
  $ hg ci -Am C1
  adding C1

  $ echo C2 > C2
  $ hg ci -Am C2
  adding C2

  $ cd ..

  $ hg clone a b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd b

  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1


  $ cd ../a

  $ echo R1 > R1
  $ hg ci -Am R1
  adding R1


  $ cd ../b

Now b has one revision to be pulled from a:

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  saved backup bundle to $TESTTMP/b/.hg/strip-backup/*-backup.hg (glob)

  $ hg tglog
  @  3: 'L1'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
Re-run:

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found


Invoke pull --rebase and nothing to rebase:

  $ cd ../c

  $ hg book norebase
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  nothing to rebase
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark norebase

  $ hg tglog -l 1
  @  2: 'R1'
  |

pull --rebase --update should ignore --update:

  $ hg pull --rebase --update
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

pull --rebase doesn't update if nothing has been pulled:

  $ hg up -q 1

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

  $ hg tglog -l 1
  o  2: 'R1'
  |

  $ cd ..

pull --rebase works when a specific revision is pulled (issue3619)

  $ cd a
  $ hg tglog
  @  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ echo R2 > R2
  $ hg ci -Am R2
  adding R2
  $ echo R3 > R3
  $ hg ci -Am R3
  adding R3
  $ cd ../c
  $ hg tglog
  o  2: 'R1'
  |
  @  1: 'C2'
  |
  o  0: 'C1'
  
  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1
  created new head
  $ hg pull --rev tip --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-backup.hg (glob)
  $ hg tglog
  @  5: 'L1'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'