annotate: increase refcount of each revisions correctly (issue3841)
Before this patch, refcount (managed in "needed") of parents of each
revisions in "visit" is increased, only when parent is not annotated
yet (examined by "p not in hist").
But this causes less refcount of the revision like "A" in the tree
below ("A" is assumed as the second parent of "C"):
A --- B --- C
\ /
\-----/
Steps of annotation for "C" in this case are shown below:
1. for "C"
1.1 increase refcount of "B"
1.2 increase refcount of "A" (=> 1)
1.3 defer annotation for "C"
2. for "A"
2.1 annotate for "A" (=> put result into "hist[A]")
2.2 clear "pcache[A]" ("pcache[A] = []")
3. for "B"
3.1 not increase refcount of "A", because "A not in hist" is False
3.2 annotate for "B"
3.3 decrease refcount of "A" (=> 0)
3.4 delete "hist[A]", even though "A" is still needed by "C"
3.5 clear "pcache[B]"
4. for "C", again
4.1 not increase refcount of "B", because "B not in hist" is False
4.2 increase refcount of "A" (=> 1)
4.3 defer annotation for "C"
5. for "A", again
5.1 annotate for "A" (=> put result into "hist[A]", again)
5.2 clear "pcache[A]"
6. for "C", once again
6.1 not increase refcount of "B", because "B not in hist" is False
6.2 not increase refcount of "A", because "A not in hist" is False
6.3 annotate for "C"
6.4 decrease refcount of "A", and delete "hist[A]"
6.5 decrease refcount of "B", and delete "hist[B]"
6.6 clear "pcache[C]"
At step (5.1), annotation for "A" mis-recognizes that all lines are
created at "A", because "pcache[A]" already cleared at step (2.2)
prevents from scanning ancestors of "A".
So, annotation for "C" or its descendants loses information about "A"
or its ancestors.
The root cause of this problem is that refcount of "A" is decreased at
step (3.3), even though it isn't increased at step (3.1).
To increase refcount correctly, this patch increases refcount of each
parents of each revisions:
- regardless of "p not in hist" or not, and
- only once for each revisions in "visit" (by "not pcached")
In fact, this problem should occur only on legacy repositories in
which a filelog includes the merging between the revision and its
ancestor (as the second parent), because:
- tree is scanned in depth-first
without such merging, revisions in "visit" refer different
revisions as parent each other
- recent Mercurial doesn't allow such merging
changelog and manifest can include such merging someway, but
filelogs can't, because "localrepository._filecommit()" converts
such merging request to linear history.
This patch tests merging cases below: these cases are from filelog of
"mercurial/commands.py" in the repository of Mercurial itself.
- both parents are same
10 --- 11 --- 12
\_/
filelogrev: changesetid:
10 00ea3613f82c
11 fc4a6e5b5812
12 4f802588cdfb
- the second parent is also ancestor of the first one
37 --- 38 --- 39 --- 40
\________/
filelogrev: changesetid:
37 f8d56da6ac8f
38 38919e1c254d
39 d3400605d246
40 f06a4a3b86a7
This test tries to exercise the ssh functionality with a dummy script
$ checknewrepo()
> {
> name=$1
> if [ -d "$name"/.hg/store ]; then
> echo store created
> fi
> if [ -f "$name"/.hg/00changelog.i ]; then
> echo 00changelog.i created
> fi
> cat "$name"/.hg/requires
> }
creating 'local'
$ hg init local
$ checknewrepo local
store created
00changelog.i created
dotencode
fncache
revlogv1
store
$ echo this > local/foo
$ hg ci --cwd local -A -m "init"
adding foo
creating repo with format.usestore=false
$ hg --config format.usestore=false init old
$ checknewrepo old
revlogv1
creating repo with format.usefncache=false
$ hg --config format.usefncache=false init old2
$ checknewrepo old2
store created
00changelog.i created
revlogv1
store
creating repo with format.dotencode=false
$ hg --config format.dotencode=false init old3
$ checknewrepo old3
store created
00changelog.i created
fncache
revlogv1
store
test failure
$ hg init local
abort: repository local already exists!
[255]
init+push to remote2
$ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
$ hg incoming -R remote2 local
comparing with local
changeset: 0:08b9e9f63b32
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: init
$ hg push -R local -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
pushing to ssh://user@dummy/remote2
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
clone to remote1
$ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
init to existing repo
$ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
abort: repository remote1 already exists!
abort: could not create remote repo!
[255]
clone to existing repo
$ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
abort: repository remote1 already exists!
abort: could not create remote repo!
[255]
output of dummyssh
$ cat dummylog
Got arguments 1:user@dummy 2:hg init remote2
Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
Got arguments 1:user@dummy 2:hg init remote1
Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
Got arguments 1:user@dummy 2:hg init remote1
Got arguments 1:user@dummy 2:hg init remote1
comparing repositories
$ hg tip -q -R local
0:08b9e9f63b32
$ hg tip -q -R remote1
0:08b9e9f63b32
$ hg tip -q -R remote2
0:08b9e9f63b32
check names for repositories (clashes with URL schemes, special chars)
$ for i in bundle file hg http https old-http ssh static-http "with space"; do
> printf "hg init \"$i\"... "
> hg init "$i"
> test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
> done
hg init "bundle"... ok
hg init "file"... ok
hg init "hg"... ok
hg init "http"... ok
hg init "https"... ok
hg init "old-http"... ok
hg init "ssh"... ok
hg init "static-http"... ok
hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
$ hg init " "
$ test -d " "
$ test -d " /.hg"
#endif
creating 'local/sub/repo'
$ hg init local/sub/repo
$ checknewrepo local/sub/repo
store created
00changelog.i created
dotencode
fncache
revlogv1
store
prepare test of init of url configured from paths
$ echo '[paths]' >> $HGRCPATH
$ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
$ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH
init should (for consistency with clone) expand the url
$ hg init somewhere
$ checknewrepo "url from paths"
store created
00changelog.i created
dotencode
fncache
revlogv1
store
verify that clone also expand urls
$ hg clone somewhere elsewhere
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ checknewrepo "another paths url"
store created
00changelog.i created
dotencode
fncache
revlogv1
store
clone bookmarks
$ hg -R local bookmark test
$ hg -R local bookmarks
* test 0:08b9e9f63b32
$ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg -R remote-bookmarks bookmarks
test 0:08b9e9f63b32