annotate: increase refcount of each revisions correctly (issue3841)
Before this patch, refcount (managed in "needed") of parents of each
revisions in "visit" is increased, only when parent is not annotated
yet (examined by "p not in hist").
But this causes less refcount of the revision like "A" in the tree
below ("A" is assumed as the second parent of "C"):
A --- B --- C
\ /
\-----/
Steps of annotation for "C" in this case are shown below:
1. for "C"
1.1 increase refcount of "B"
1.2 increase refcount of "A" (=> 1)
1.3 defer annotation for "C"
2. for "A"
2.1 annotate for "A" (=> put result into "hist[A]")
2.2 clear "pcache[A]" ("pcache[A] = []")
3. for "B"
3.1 not increase refcount of "A", because "A not in hist" is False
3.2 annotate for "B"
3.3 decrease refcount of "A" (=> 0)
3.4 delete "hist[A]", even though "A" is still needed by "C"
3.5 clear "pcache[B]"
4. for "C", again
4.1 not increase refcount of "B", because "B not in hist" is False
4.2 increase refcount of "A" (=> 1)
4.3 defer annotation for "C"
5. for "A", again
5.1 annotate for "A" (=> put result into "hist[A]", again)
5.2 clear "pcache[A]"
6. for "C", once again
6.1 not increase refcount of "B", because "B not in hist" is False
6.2 not increase refcount of "A", because "A not in hist" is False
6.3 annotate for "C"
6.4 decrease refcount of "A", and delete "hist[A]"
6.5 decrease refcount of "B", and delete "hist[B]"
6.6 clear "pcache[C]"
At step (5.1), annotation for "A" mis-recognizes that all lines are
created at "A", because "pcache[A]" already cleared at step (2.2)
prevents from scanning ancestors of "A".
So, annotation for "C" or its descendants loses information about "A"
or its ancestors.
The root cause of this problem is that refcount of "A" is decreased at
step (3.3), even though it isn't increased at step (3.1).
To increase refcount correctly, this patch increases refcount of each
parents of each revisions:
- regardless of "p not in hist" or not, and
- only once for each revisions in "visit" (by "not pcached")
In fact, this problem should occur only on legacy repositories in
which a filelog includes the merging between the revision and its
ancestor (as the second parent), because:
- tree is scanned in depth-first
without such merging, revisions in "visit" refer different
revisions as parent each other
- recent Mercurial doesn't allow such merging
changelog and manifest can include such merging someway, but
filelogs can't, because "localrepository._filecommit()" converts
such merging request to linear history.
This patch tests merging cases below: these cases are from filelog of
"mercurial/commands.py" in the repository of Mercurial itself.
- both parents are same
10 --- 11 --- 12
\_/
filelogrev: changesetid:
10 00ea3613f82c
11 fc4a6e5b5812
12 4f802588cdfb
- the second parent is also ancestor of the first one
37 --- 38 --- 39 --- 40
\________/
filelogrev: changesetid:
37 f8d56da6ac8f
38 38919e1c254d
39 d3400605d246
40 f06a4a3b86a7
$ HGMERGE=true; export HGMERGE
init
$ hg init repo
$ cd repo
commit
$ echo 'a' > a
$ hg ci -A -m test -u nobody -d '1 0'
adding a
annotate -c
$ hg annotate -c a
8435f90966e4: a
annotate -cl
$ hg annotate -cl a
8435f90966e4:1: a
annotate -d
$ hg annotate -d a
Thu Jan 01 00:00:01 1970 +0000: a
annotate -n
$ hg annotate -n a
0: a
annotate -nl
$ hg annotate -nl a
0:1: a
annotate -u
$ hg annotate -u a
nobody: a
annotate -cdnu
$ hg annotate -cdnu a
nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000: a
annotate -cdnul
$ hg annotate -cdnul a
nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000:1: a
$ cat <<EOF >>a
> a
> a
> EOF
$ hg ci -ma1 -d '1 0'
$ hg cp a b
$ hg ci -mb -d '1 0'
$ cat <<EOF >> b
> b4
> b5
> b6
> EOF
$ hg ci -mb2 -d '2 0'
annotate -n b
$ hg annotate -n b
0: a
1: a
1: a
3: b4
3: b5
3: b6
annotate --no-follow b
$ hg annotate --no-follow b
2: a
2: a
2: a
3: b4
3: b5
3: b6
annotate -nl b
$ hg annotate -nl b
0:1: a
1:2: a
1:3: a
3:4: b4
3:5: b5
3:6: b6
annotate -nf b
$ hg annotate -nf b
0 a: a
1 a: a
1 a: a
3 b: b4
3 b: b5
3 b: b6
annotate -nlf b
$ hg annotate -nlf b
0 a:1: a
1 a:2: a
1 a:3: a
3 b:4: b4
3 b:5: b5
3 b:6: b6
$ hg up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat <<EOF >> b
> b4
> c
> b5
> EOF
$ hg ci -mb2.1 -d '2 0'
created new head
$ hg merge
merging b
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -mmergeb -d '3 0'
annotate after merge
$ hg annotate -nf b
0 a: a
1 a: a
1 a: a
3 b: b4
4 b: c
3 b: b5
annotate after merge with -l
$ hg annotate -nlf b
0 a:1: a
1 a:2: a
1 a:3: a
3 b:4: b4
4 b:5: c
3 b:5: b5
$ hg up -C 1
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg cp a b
$ cat <<EOF > b
> a
> z
> a
> EOF
$ hg ci -mc -d '3 0'
created new head
$ hg merge
merging b
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat <<EOF >> b
> b4
> c
> b5
> EOF
$ echo d >> b
$ hg ci -mmerge2 -d '4 0'
annotate after rename merge
$ hg annotate -nf b
0 a: a
6 b: z
1 a: a
3 b: b4
4 b: c
3 b: b5
7 b: d
annotate after rename merge with -l
$ hg annotate -nlf b
0 a:1: a
6 b:2: z
1 a:3: a
3 b:4: b4
4 b:5: c
3 b:5: b5
7 b:7: d
Issue2807: alignment of line numbers with -l
$ echo more >> b
$ hg ci -mmore -d '5 0'
$ echo more >> b
$ hg ci -mmore -d '6 0'
$ echo more >> b
$ hg ci -mmore -d '7 0'
$ hg annotate -nlf b
0 a: 1: a
6 b: 2: z
1 a: 3: a
3 b: 4: b4
4 b: 5: c
3 b: 5: b5
7 b: 7: d
8 b: 8: more
9 b: 9: more
10 b:10: more
linkrev vs rev
$ hg annotate -r tip -n a
0: a
1: a
1: a
linkrev vs rev with -l
$ hg annotate -r tip -nl a
0:1: a
1:2: a
1:3: a
Issue589: "undelete" sequence leads to crash
annotate was crashing when trying to --follow something
like A -> B -> A
generate ABA rename configuration
$ echo foo > foo
$ hg add foo
$ hg ci -m addfoo
$ hg rename foo bar
$ hg ci -m renamefoo
$ hg rename bar foo
$ hg ci -m renamebar
annotate after ABA with follow
$ hg annotate --follow foo
foo: foo
missing file
$ hg ann nosuchfile
abort: nosuchfile: no such file in rev e9e6b4fa872f
[255]
annotate file without '\n' on last line
$ printf "" > c
$ hg ci -A -m test -u nobody -d '1 0'
adding c
$ hg annotate c
$ printf "a\nb" > c
$ hg ci -m test
$ hg annotate c
[0-9]+: a (re)
[0-9]+: b (re)
Issue3841: check annotation of the file of which filelog includes
merging between the revision and its ancestor
to reproduce the situation with recent Mercurial, this script uses (1)
"hg debugsetparents" to merge without ancestor check by "hg merge",
and (2) the extension to allow filelog merging between the revision
and its ancestor by overriding "repo._filecommit".
$ cat > ../legacyrepo.py <<EOF
> from mercurial import node, util
> def reposetup(ui, repo):
> class legacyrepo(repo.__class__):
> def _filecommit(self, fctx, manifest1, manifest2,
> linkrev, tr, changelist):
> fname = fctx.path()
> text = fctx.data()
> flog = self.file(fname)
> fparent1 = manifest1.get(fname, node.nullid)
> fparent2 = manifest2.get(fname, node.nullid)
> meta = {}
> copy = fctx.renamed()
> if copy and copy[0] != fname:
> raise util.Abort('copying is not supported')
> if fparent2 != node.nullid:
> changelist.append(fname)
> return flog.add(text, meta, tr, linkrev,
> fparent1, fparent2)
> raise util.Abort('only merging is supported')
> repo.__class__ = legacyrepo
> EOF
$ cat > baz <<EOF
> 1
> 2
> 3
> 4
> 5
> EOF
$ hg add baz
$ hg commit -m "baz:0"
$ cat > baz <<EOF
> 1 baz:1
> 2
> 3
> 4
> 5
> EOF
$ hg commit -m "baz:1"
$ cat > baz <<EOF
> 1 baz:1
> 2 baz:2
> 3
> 4
> 5
> EOF
$ hg debugsetparents 17 17
$ hg --config extensions.legacyrepo=../legacyrepo.py commit -m "baz:2"
$ hg debugindexdot .hg/store/data/baz.i
digraph G {
-1 -> 0
0 -> 1
1 -> 2
1 -> 2
}
$ hg annotate baz
17: 1 baz:1
18: 2 baz:2
16: 3
16: 4
16: 5
$ cat > baz <<EOF
> 1 baz:1
> 2 baz:2
> 3 baz:3
> 4
> 5
> EOF
$ hg commit -m "baz:3"
$ cat > baz <<EOF
> 1 baz:1
> 2 baz:2
> 3 baz:3
> 4 baz:4
> 5
> EOF
$ hg debugsetparents 19 18
$ hg --config extensions.legacyrepo=../legacyrepo.py commit -m "baz:4"
$ hg debugindexdot .hg/store/data/baz.i
digraph G {
-1 -> 0
0 -> 1
1 -> 2
1 -> 2
2 -> 3
3 -> 4
2 -> 4
}
$ hg annotate baz
17: 1 baz:1
18: 2 baz:2
19: 3 baz:3
20: 4 baz:4
16: 5
Test annotate with whitespace options
$ cd ..
$ hg init repo-ws
$ cd repo-ws
$ cat > a <<EOF
> aa
>
> b b
> EOF
$ hg ci -Am "adda"
adding a
$ sed 's/EOL$//g' > a <<EOF
> a a
>
> EOL
> b b
> EOF
$ hg ci -m "changea"
Annotate with no option
$ hg annotate a
1: a a
0:
1:
1: b b
Annotate with --ignore-space-change
$ hg annotate --ignore-space-change a
1: a a
1:
0:
0: b b
Annotate with --ignore-all-space
$ hg annotate --ignore-all-space a
0: a a
0:
1:
0: b b
Annotate with --ignore-blank-lines (similar to no options case)
$ hg annotate --ignore-blank-lines a
1: a a
0:
1:
1: b b
$ cd ..