convert: handle percent-encoded bytes in file URLs like Subversion
75b59d221aa3 added most of the code that gets removed by this patch. It helped
making progress on Python 3, but the reasoning was wrong in many ways. I tried
to retract it while it was queued, but it was too late.
Back then, I was asssuming that what happened on Python 2 (preserving bytes) is
correct and my Python 3 change is a hack. However it turned out that Subversion
interprets percent-encoded bytes as UTF-8. Accepting the same format as
Subversion is a good idea.
Consistency with urlreq.pathname2url() (as described in the removed comment)
doesn’t matter because that function is only used for passing paths to urllib.
This is not a backwards-incompatible change because before 5c0d5b48e58c,
non-ASCII filenames didn’t work at all on Python 2.
When the locale encoding is ISO-8859-15, `svn` accepts `file:///tmp/a%E2%82%AC`
for `/tmp/a€`. Before this patch, this was the case for this extension on
Python 3, but not on Python 2. This patch makes it work like with `svn` on both
Python 2 and Python 3.
#require svn svn-bindings
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ svnadmin create svn-repo
$ svnadmin load -q svn-repo < "$TESTDIR/svn/encoding.svndump"
Convert while testing all possible outputs
$ hg --debug convert svn-repo A-hg --config progress.debug=1
initializing destination A-hg repository
reparent to file:/*/$TESTTMP/svn-repo (glob)
run hg sink pre-conversion action
scanning source...
found trunk at 'trunk'
found tags at 'tags'
found branches at 'branches'
found branch branch\xc3\xa9 at 5 (esc)
found branch branch\xc3\xa9e at 6 (esc)
scanning: 1/4 revisions (25.00%)
reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
fetching revision log for "/trunk" from 4 to 0
parsing revision 4 (2 changes)
parsing revision 3 (4 changes)
parsing revision 2 (3 changes)
parsing revision 1 (3 changes)
no copyfrom path, don't know what to do.
'/branches' is not under '/trunk', ignoring
'/tags' is not under '/trunk', ignoring
scanning: 2/4 revisions (50.00%)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
fetching revision log for "/branches/branch\xc3\xa9" from 5 to 0 (esc)
parsing revision 5 (1 changes)
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
found parent of branch /branches/branch\xc3\xa9 at 4: /trunk (esc)
scanning: 3/4 revisions (75.00%)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
fetching revision log for "/branches/branch\xc3\xa9e" from 6 to 0 (esc)
parsing revision 6 (1 changes)
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
found parent of branch /branches/branch\xc3\xa9e at 5: /branches/branch\xc3\xa9 (esc)
scanning: 4/4 revisions (100.00%)
scanning: 5/4 revisions (125.00%)
scanning: 6/4 revisions (150.00%)
sorting...
converting...
5 init projA
source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@1
converting: 0/6 revisions (0.00%)
reusing manifest from p1 (no file change)
committing changelog
updating the branch cache
4 hello
source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@2
converting: 1/6 revisions (16.67%)
reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
scanning paths: /trunk/\xc3\xa0 0/3 paths (0.00%) (esc)
scanning paths: /trunk/\xc3\xa0/e\xcc\x81 1/3 paths (33.33%) (esc)
scanning paths: /trunk/\xc3\xa9 2/3 paths (66.67%) (esc)
committing files:
\xc3\xa0/e\xcc\x81 (esc)
getting files: \xc3\xa0/e\xcc\x81 1/2 files (50.00%) (esc)
\xc3\xa9 (esc)
getting files: \xc3\xa9 2/2 files (100.00%) (esc)
committing manifest
committing changelog
updating the branch cache
3 copy files
source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@3
converting: 2/6 revisions (33.33%)
scanning paths: /trunk/\xc3\xa0 0/4 paths (0.00%) (esc)
gone from -1
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
scanning paths: /trunk/\xc3\xa8 1/4 paths (25.00%) (esc)
copied to \xc3\xa8 from \xc3\xa9@2 (esc)
scanning paths: /trunk/\xc3\xa9 2/4 paths (50.00%) (esc)
gone from -1
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
scanning paths: /trunk/\xc3\xb9 3/4 paths (75.00%) (esc)
mark /trunk/\xc3\xb9 came from \xc3\xa0:2 (esc)
getting files: \xc3\xa0/e\xcc\x81 1/4 files (25.00%) (esc)
getting files: \xc3\xa9 2/4 files (50.00%) (esc)
committing files:
\xc3\xa8 (esc)
getting files: \xc3\xa8 3/4 files (75.00%) (esc)
\xc3\xa8: copy \xc3\xa9:6b67ccefd5ce6de77e7ead4f5292843a0255329f (esc)
\xc3\xb9/e\xcc\x81 (esc)
getting files: \xc3\xb9/e\xcc\x81 4/4 files (100.00%) (esc)
\xc3\xb9/e\xcc\x81: copy \xc3\xa0/e\xcc\x81:a9092a3d84a37b9993b5c73576f6de29b7ea50f6 (esc)
committing manifest
committing changelog
updating the branch cache
2 remove files
source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@4
converting: 3/6 revisions (50.00%)
scanning paths: /trunk/\xc3\xa8 0/2 paths (0.00%) (esc)
gone from -1
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
scanning paths: /trunk/\xc3\xb9 1/2 paths (50.00%) (esc)
gone from -1
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
getting files: \xc3\xa8 1/2 files (50.00%) (esc)
getting files: \xc3\xb9/e\xcc\x81 2/2 files (100.00%) (esc)
committing files:
committing manifest
committing changelog
updating the branch cache
1 branch to branch?
source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?@5
converting: 4/6 revisions (66.67%)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
scanning paths: /branches/branch\xc3\xa9 0/1 paths (0.00%) (esc)
reusing manifest from p1 (no file change)
committing changelog
updating the branch cache
0 branch to branch?e
source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?e@6
converting: 5/6 revisions (83.33%)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
scanning paths: /branches/branch\xc3\xa9e 0/1 paths (0.00%) (esc)
reusing manifest from p1 (no file change)
committing changelog
updating the branch cache
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
reparent to file:/*/$TESTTMP/svn-repo (glob)
reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
updating tags
committing files:
.hgtags
committing manifest
committing changelog
updating the branch cache
run hg sink post-conversion action
$ cd A-hg
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Check tags are in UTF-8
$ cat .hgtags
e94e4422020e715add80525e8f0f46c9968689f1 branch\xc3\xa9e (esc)
f7e66f98380ed1e53a797c5c7a7a2616a7ab377d branch\xc3\xa9 (esc)
$ cd ..
Subversion sources don't support non-ASCII characters in HTTP(S) URLs.
$ XFF=$($PYTHON -c 'from mercurial.utils.procutil import stdout; stdout.write(b"\xff")')
$ hg convert --source-type=svn http://localhost:$HGPORT/$XFF test
initializing destination test repository
Subversion sources don't support non-ASCII characters in HTTP(S) URLs. Please percent-encode them.
http://localhost:$HGPORT/\xff does not look like a Subversion repository (esc)
abort: http://localhost:$HGPORT/\xff: missing or unsupported repository (esc)
[255]
In Subversion, paths are Unicode (encoded as UTF-8). Therefore paths that can't
be converted between UTF-8 and the locale encoding (which is always ASCII in
tests) don't work.
$ cp -R svn-repo $XFF
$ hg convert $XFF test
initializing destination test repository
Subversion requires that paths can be converted to Unicode using the current locale encoding (ascii)
\xff does not look like a CVS checkout (glob) (esc)
$TESTTMP/\xff does not look like a Git repository (esc)
\xff does not look like a Subversion repository (glob) (esc)
\xff is not a local Mercurial repository (glob) (esc)
\xff does not look like a darcs repository (glob) (esc)
\xff does not look like a monotone repository (glob) (esc)
\xff does not look like a GNU Arch repository (glob) (esc)
\xff does not look like a Bazaar repository (glob) (esc)
cannot find required "p4" tool
abort: \xff: missing or unsupported repository (glob) (esc)
[255]
$ hg convert file://$TESTTMP/$XFF test
initializing destination test repository
Subversion requires that file URLs can be converted to Unicode using the current locale encoding (ascii)
file:/*/$TESTTMP/\xff does not look like a CVS checkout (glob) (esc)
$TESTTMP/file:$TESTTMP/\xff does not look like a Git repository (esc)
file:/*/$TESTTMP/\xff does not look like a Subversion repository (glob) (esc)
file:/*/$TESTTMP/\xff is not a local Mercurial repository (glob) (esc)
file:/*/$TESTTMP/\xff does not look like a darcs repository (glob) (esc)
file:/*/$TESTTMP/\xff does not look like a monotone repository (glob) (esc)
file:/*/$TESTTMP/\xff does not look like a GNU Arch repository (glob) (esc)
file:/*/$TESTTMP/\xff does not look like a Bazaar repository (glob) (esc)
file:/*/$TESTTMP/\xff does not look like a P4 repository (glob) (esc)
abort: file:/*/$TESTTMP/\xff: missing or unsupported repository (glob) (esc)
[255]
Subversion decodes percent-encoded bytes on the converted, UTF-8-encoded
string. Therefore, if the percent-encoded bytes aren't valid UTF-8, Subversion
would choke on them when converting them to the locale encoding.
$ hg convert file://$TESTTMP/%FF test
initializing destination test repository
Subversion does not support non-UTF-8 percent-encoded bytes in file URLs
file:/*/$TESTTMP/%FF does not look like a CVS checkout (glob)
$TESTTMP/file:$TESTTMP/%FF does not look like a Git repository
file:/*/$TESTTMP/%FF does not look like a Subversion repository (glob)
file:/*/$TESTTMP/%FF is not a local Mercurial repository (glob)
file:/*/$TESTTMP/%FF does not look like a darcs repository (glob)
file:/*/$TESTTMP/%FF does not look like a monotone repository (glob)
file:/*/$TESTTMP/%FF does not look like a GNU Arch repository (glob)
file:/*/$TESTTMP/%FF does not look like a Bazaar repository (glob)
file:/*/$TESTTMP/%FF does not look like a P4 repository (glob)
abort: file:/*/$TESTTMP/%FF: missing or unsupported repository (glob)
[255]