procutil: make stream detection in make_line_buffered more correct and strict
In make_line_buffered(), we don’t want to wrap the stream if we know that lines
get flushed to the underlying raw stream already.
Previously, the heuristic was too optimistic. It assumed that any stream which
is not an instance of io.BufferedIOBase doesn’t need wrapping. However, there
are buffered streams that aren’t instances of io.BufferedIOBase, like
Mercurial’s own winstdout.
The new logic is different in two ways:
First, only for the check, if unwraps any combination of WriteAllWrapper and
winstdout.
Second, it skips wrapping the stream only if it is an instance of io.RawIOBase
(or already wrapped). If it is an instance of io.BufferedIOBase, it gets
wrapped. In any other case, the function raises an exception. This ensures
that, if an unknown stream is passed or we add another wrapper in the future,
we don’t wrap the stream if it’s already line buffered or not wrap the stream
if it’s not line buffered. In fact, this was already helpful during development
of this change. Without it, I possibly would have forgot that WriteAllWrapper
needs to be ignored for the check, leading to unnecessary wrapping if stdout is
unbuffered.
The alternative would have been to always wrap unknown streams. However, I
don’t think that anyone would benefit from being less strict. We can expect
streams from the standard library to be subclassing either io.RawIOBase or
io.BufferedIOBase, so running Mercurial in the standard way should not regress
by this change. Py2exe might replace sys.stdout and sys.stderr, but that
currently breaks Mercurial anyway and also these streams don’t claim to be
interactive, so this function is not called for them.
Test wire protocol argument passing
Setup repo:
$ hg init repo
Local:
$ hg debugwireargs repo eins zwei --three drei --four vier
eins zwei drei vier None
$ hg debugwireargs repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs repo eins zwei
eins zwei None None None
$ hg debugwireargs repo eins zwei --five fuenf
eins zwei None None fuenf
HTTP:
$ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid \
> -E error.log -A access.log \
> --config experimental.httppostargs=yes
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
HTTP without args-in-POST:
$ hg serve -R repo -p $HGPORT1 -d --pid-file=hg1.pid -E error.log -A access.log
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT1/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT1/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT1/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
HTTP without the httpheader capability:
$ CAP=httpheader . "$TESTDIR/notcapable"
$ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
$ cat hg2.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
eins zwei None None None
$ cat error2.log
$ cat access2.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
SSH (try to exercise the ssh functionality with a dummy script):
$ hg debugwireargs ssh://user@dummy/repo uno due tre quattro
uno due tre quattro None
$ hg debugwireargs ssh://user@dummy/repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs ssh://user@dummy/repo eins zwei
eins zwei None None None
$ hg debugwireargs ssh://user@dummy/repo eins zwei --five fuenf
eins zwei None None None
Explicitly kill daemons to let the test exit on Windows
$ killdaemons.py