procutil: make stream detection in make_line_buffered more correct and strict
In make_line_buffered(), we don’t want to wrap the stream if we know that lines
get flushed to the underlying raw stream already.
Previously, the heuristic was too optimistic. It assumed that any stream which
is not an instance of io.BufferedIOBase doesn’t need wrapping. However, there
are buffered streams that aren’t instances of io.BufferedIOBase, like
Mercurial’s own winstdout.
The new logic is different in two ways:
First, only for the check, if unwraps any combination of WriteAllWrapper and
winstdout.
Second, it skips wrapping the stream only if it is an instance of io.RawIOBase
(or already wrapped). If it is an instance of io.BufferedIOBase, it gets
wrapped. In any other case, the function raises an exception. This ensures
that, if an unknown stream is passed or we add another wrapper in the future,
we don’t wrap the stream if it’s already line buffered or not wrap the stream
if it’s not line buffered. In fact, this was already helpful during development
of this change. Without it, I possibly would have forgot that WriteAllWrapper
needs to be ignored for the check, leading to unnecessary wrapping if stdout is
unbuffered.
The alternative would have been to always wrap unknown streams. However, I
don’t think that anyone would benefit from being less strict. We can expect
streams from the standard library to be subclassing either io.RawIOBase or
io.BufferedIOBase, so running Mercurial in the standard way should not regress
by this change. Py2exe might replace sys.stdout and sys.stderr, but that
currently breaks Mercurial anyway and also these streams don’t claim to be
interactive, so this function is not called for them.
Tests discovery against servers without getbundle support:
$ CAP="getbundle bundle2"
$ . "$TESTDIR/notcapable"
$ cat >> $HGRCPATH <<EOF
> [command-templates]
> log="{rev} {node|short}: {desc} {branches}\n"
> EOF
Setup HTTP server control:
$ remote=http://localhost:$HGPORT/
$ export remote
$ tstart() {
> echo '[web]' > $1/.hg/hgrc
> echo 'push_ssl = false' >> $1/.hg/hgrc
> echo 'allow_push = *' >> $1/.hg/hgrc
> hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
> cat hg.pid >> $DAEMON_PIDS
> }
$ tstop() {
> killdaemons.py
> [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log
> rm access.log errors.log
> }
Both are empty:
$ hg init empty1
$ hg init empty2
$ tstart empty2
$ hg incoming -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg outgoing -R empty1 $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg pull -R empty1 $remote
pulling from http://localhost:$HGPORT/
no changes found
$ hg push -R empty1 $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ tstop
Base repo:
$ hg init main
$ cd main
$ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
$ hg log -G
o 11 a19bfa7e7328: r11 both
|
o 10 8b6bad1512e1: r10 both
|
o 9 025829e08038: r9 both
|\
| o 8 d8f638ac69e9: r8 name2
| |
| o 7 b6b4d315a2ac: r7 name2
| |
| o 6 6c6f5d5f3c11: r6 name2
| |
| o 5 70314b29987d: r5 name2
| |
o | 4 e71dbbc70e03: r4 name1
| |
o | 3 2c8d5d5ec612: r3 name1
| |
o | 2 a7892891da29: r2 name1
|/
o 1 0019a3b924fd: r1
|
o 0 d57206cc072a: r0
$ cd ..
$ tstart main
Full clone:
$ hg clone main full
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd full
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is empty:
$ cd empty1
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
requesting all changes
adding changesets
adding manifests
adding file changes
added 12 changesets with 24 changes to 2 files
new changesets d57206cc072a:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
Local is subset:
$ hg clone main subset --rev name2 ; cd subset
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets a7892891da29:a19bfa7e7328
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Remote is empty:
$ tstart empty2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
0 d57206cc072a: r0
1 0019a3b924fd: r1
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
5 70314b29987d: r5 name2
6 6c6f5d5f3c11: r6 name2
7 b6b4d315a2ac: r7 name2
8 d8f638ac69e9: r8 name2
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 12 changesets with 24 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Local is superset:
$ hg clone main subset2 --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ tstart subset2
$ cd main
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 a7892891da29: r2 name1
3 2c8d5d5ec612: r3 name1
4 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
no changes found
$ hg push $remote
pushing to http://localhost:$HGPORT/
searching for changes
abort: push creates new remote branches: both, name1
(use 'hg push --new-branch' to create new remote branches)
[20]
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 6 changesets with 12 changes to 2 files
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Partial pull:
$ tstart main
$ hg clone $remote partial --rev name2
adding changesets
adding manifests
adding file changes
added 6 changesets with 12 changes to 2 files
new changesets d57206cc072a:d8f638ac69e9
updating to branch name2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ hg incoming $remote --rev name1
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg pull $remote --rev name1
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
new changesets a7892891da29:e71dbbc70e03
(run 'hg heads' to see heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
9 025829e08038: r9 both
10 8b6bad1512e1: r10 both
11 a19bfa7e7328: r11 both
$ cd ..
$ tstop
Both have new stuff in new named branches:
$ hg clone main repo1a --rev name1 -q
$ hg clone repo1a repo1b -q
$ hg clone main repo2a --rev name2 -q
$ hg clone repo2a repo2b -q
$ tstart repo1a
$ cd repo2a
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 70314b29987d: r5 name2
3 6c6f5d5f3c11: r6 name2
4 b6b4d315a2ac: r7 name2
5 d8f638ac69e9: r8 name2
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 4 changesets with 8 changes to 2 files (+1 heads)
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
new changesets a7892891da29:e71dbbc70e03
(run 'hg heads' to see heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
$ tstart repo1b
$ cd repo2b
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
6 a7892891da29: r2 name1
7 2c8d5d5ec612: r3 name1
8 e71dbbc70e03: r4 name1
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
2 70314b29987d: r5 name2
3 6c6f5d5f3c11: r6 name2
4 b6b4d315a2ac: r7 name2
5 d8f638ac69e9: r8 name2
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 6 changes to 2 files (+1 heads)
new changesets a7892891da29:e71dbbc70e03
(run 'hg heads' to see heads)
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 4 changesets with 8 changes to 2 files (+1 heads)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
Both have new stuff in existing named branches:
$ rm -r repo1a repo1b repo2a repo2b
$ hg clone main repo1a --rev 3 --rev 8 -q
$ hg clone repo1a repo1b -q
$ hg clone main repo2a --rev 4 --rev 7 -q
$ hg clone repo2a repo2b -q
$ tstart repo1a
$ cd repo2a
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
8 d8f638ac69e9: r8 name2
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
4 e71dbbc70e03: r4 name1
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 2 changes to 2 files
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets d8f638ac69e9
(run 'hg update' to get a working copy)
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
$ tstop
$ tstart repo1b
$ cd repo2b
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
8 d8f638ac69e9: r8 name2
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
4 e71dbbc70e03: r4 name1
$ hg pull $remote
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets d8f638ac69e9
(run 'hg update' to get a working copy)
$ hg push $remote --new-branch
pushing to http://localhost:$HGPORT/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 2 changes to 2 files
$ hg incoming $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ hg outgoing $remote
comparing with http://localhost:$HGPORT/
searching for changes
no changes found
[1]
$ cd ..
#if zstd
$ tstop show
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
#else
$ tstop show
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961+2c8d5d5ec612be65cdfdeac78b7662ab1696324a x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91* (glob)
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=heads HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull
#endif