procutil: make stream detection in make_line_buffered more correct and strict
In make_line_buffered(), we don’t want to wrap the stream if we know that lines
get flushed to the underlying raw stream already.
Previously, the heuristic was too optimistic. It assumed that any stream which
is not an instance of io.BufferedIOBase doesn’t need wrapping. However, there
are buffered streams that aren’t instances of io.BufferedIOBase, like
Mercurial’s own winstdout.
The new logic is different in two ways:
First, only for the check, if unwraps any combination of WriteAllWrapper and
winstdout.
Second, it skips wrapping the stream only if it is an instance of io.RawIOBase
(or already wrapped). If it is an instance of io.BufferedIOBase, it gets
wrapped. In any other case, the function raises an exception. This ensures
that, if an unknown stream is passed or we add another wrapper in the future,
we don’t wrap the stream if it’s already line buffered or not wrap the stream
if it’s not line buffered. In fact, this was already helpful during development
of this change. Without it, I possibly would have forgot that WriteAllWrapper
needs to be ignored for the check, leading to unnecessary wrapping if stdout is
unbuffered.
The alternative would have been to always wrap unknown streams. However, I
don’t think that anyone would benefit from being less strict. We can expect
streams from the standard library to be subclassing either io.RawIOBase or
io.BufferedIOBase, so running Mercurial in the standard way should not regress
by this change. Py2exe might replace sys.stdout and sys.stderr, but that
currently breaks Mercurial anyway and also these streams don’t claim to be
interactive, so this function is not called for them.
Test that qpush cleans things up if it doesn't complete
$ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ hg init repo
$ cd repo
$ echo foo > foo
$ hg ci -Am 'add foo'
adding foo
$ touch untracked-file
$ echo 'syntax: glob' > .hgignore
$ echo '.hgignore' >> .hgignore
$ hg qinit
test qpush on empty series
$ hg qpush
no patches in series
$ hg qnew patch1
$ echo >> foo
$ hg qrefresh -m 'patch 1'
$ hg qnew patch2
$ echo bar > bar
$ hg add bar
$ hg qrefresh -m 'patch 2'
$ hg qnew --config 'mq.plain=true' -U bad-patch
$ echo >> foo
$ hg qrefresh
$ hg qpop -a
popping bad-patch
popping patch2
popping patch1
patch queue now empty
$ "$PYTHON" -c 'import sys; getattr(sys.stdout, "buffer", sys.stdout).write(b"\xe9\n")' > message
$ cat .hg/patches/bad-patch >> message
$ mv message .hg/patches/bad-patch
$ cat > $TESTTMP/wrapplayback.py <<EOF
> import os
> from mercurial import extensions, transaction
> def wrapplayback(orig,
> journal, report, opener, vfsmap, entries, backupentries,
> unlink=True, checkambigfiles=None):
> orig(journal, report, opener, vfsmap, entries, backupentries, unlink,
> checkambigfiles)
> # Touching files truncated at "transaction.abort" causes
> # forcible re-loading invalidated filecache properties
> # (including repo.changelog)
> for f, o in entries:
> if o or not unlink:
> os.utime(opener.join(f), (0.0, 0.0))
> def extsetup(ui):
> extensions.wrapfunction(transaction, '_playback', wrapplayback)
> EOF
$ hg qpush -a --config extensions.wrapplayback=$TESTTMP/wrapplayback.py && echo 'qpush succeeded?!'
applying patch1
applying patch2
applying bad-patch
transaction abort!
rollback completed
cleaning up working directory...
reverting foo
done
abort: decoding near '\xe9': 'ascii' codec can't decode byte 0xe9 in position 0: ordinal not in range(128)! (esc)
[255]
$ hg parents
changeset: 0:bbd179dfa0a7
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add foo
test corrupt status file
$ hg qpush
applying patch1
now at: patch1
$ cp .hg/patches/status .hg/patches/status.orig
$ hg qpop
popping patch1
patch queue now empty
$ cp .hg/patches/status.orig .hg/patches/status
$ hg qpush
abort: working directory revision is not qtip
[255]
$ rm .hg/patches/status .hg/patches/status.orig
bar should be gone; other unknown/ignored files should still be around
$ hg status -A
? untracked-file
I .hgignore
C foo
preparing qpush of a missing patch
$ hg qpop -a
no patches applied
$ hg qpush
applying patch1
now at: patch1
$ rm .hg/patches/patch2
now we expect the push to fail, but it should NOT complain about patch1
$ hg qpush
applying patch2
unable to read patch2
now at: patch1
[1]
preparing qpush of missing patch with no patch applied
$ hg qpop -a
popping patch1
patch queue now empty
$ rm .hg/patches/patch1
qpush should fail the same way as below
$ hg qpush
applying patch1
unable to read patch1
[1]
Test qpush to a patch below the currently applied patch.
$ hg qq -c guardedseriesorder
$ hg qnew a
$ hg qguard +block
$ hg qnew b
$ hg qnew c
$ hg qpop -a
popping c
popping b
popping a
patch queue now empty
try to push and pop while a is guarded
$ hg qpush a
cannot push 'a' - guarded by '+block'
[1]
$ hg qpush -a
applying b
patch b is empty
applying c
patch c is empty
now at: c
now try it when a is unguarded, and we're at the top of the queue
$ hg qapplied -v
0 G a
1 A b
2 A c
$ hg qsel block
$ hg qpush b
abort: cannot push to a previous patch: b
[255]
$ hg qpush a
abort: cannot push to a previous patch: a
[255]
and now we try it one more time with a unguarded, while we're not at the top of the queue
$ hg qpop b
popping c
now at: b
$ hg qpush a
abort: cannot push to a previous patch: a
[255]
test qpop --force and backup files
$ hg qpop -a
popping b
patch queue now empty
$ hg qq --create force
$ echo a > a
$ echo b > b
$ echo c > c
$ hg ci -Am add a b c
$ echo a >> a
$ hg rm b
$ hg rm c
$ hg qnew p1
$ echo a >> a
$ echo bb > b
$ hg add b
$ echo cc > c
$ hg add c
$ hg qpop --force --verbose
saving current version of a as a.orig
saving current version of b as b.orig
saving current version of c as c.orig
popping p1
patch queue now empty
$ hg st
? a.orig
? b.orig
? c.orig
? untracked-file
$ cat a.orig
a
a
a
$ cat b.orig
bb
$ cat c.orig
cc
test qpop --force --no-backup
$ hg qpush
applying p1
now at: p1
$ rm a.orig
$ echo a >> a
$ hg qpop --force --no-backup --verbose
popping p1
patch queue now empty
$ test -f a.orig && echo 'error: backup with --no-backup'
[1]
test qpop --keep-changes
$ hg qpush
applying p1
now at: p1
$ hg qpop --keep-changes --force
abort: cannot use both --force and --keep-changes
[255]
$ echo a >> a
$ hg qpop --keep-changes
abort: local changes found, qrefresh first
[255]
$ hg revert -qa a
$ rm a
$ hg qpop --keep-changes
abort: local changes found, qrefresh first
[255]
$ hg rm -A a
$ hg qpop --keep-changes
abort: local changes found, qrefresh first
[255]
$ hg revert -qa a
$ echo b > b
$ hg add b
$ hg qpop --keep-changes
abort: local changes found, qrefresh first
[255]
$ hg forget b
$ echo d > d
$ hg add d
$ hg qpop --keep-changes
popping p1
patch queue now empty
$ hg forget d
$ rm d
test qpush --force and backup files
$ echo a >> a
$ hg qnew p2
$ echo b >> b
$ echo d > d
$ echo e > e
$ hg add d e
$ hg rm c
$ hg qnew p3
$ hg qpop -a
popping p3
popping p2
patch queue now empty
$ echo a >> a
$ echo b1 >> b
$ echo d1 > d
$ hg add d
$ echo e1 > e
$ hg qpush -a --force --verbose
applying p2
saving current version of a as a.orig
patching file a
committing files:
a
committing manifest
committing changelog
applying p3
saving current version of b as b.orig
saving current version of d as d.orig
patching file b
patching file c
patching file d
file d already exists
1 out of 1 hunks FAILED -- saving rejects to file d.rej
patching file e
file e already exists
1 out of 1 hunks FAILED -- saving rejects to file e.rej
patch failed to apply
committing files:
b
committing manifest
committing changelog
patch failed, rejects left in working directory
errors during apply, please fix and qrefresh p3
[2]
$ cat a.orig
a
a
$ cat b.orig
b
b1
$ cat d.orig
d1
test qpush --force --no-backup
$ hg revert -qa
$ hg qpop -a
popping p3
popping p2
patch queue now empty
$ echo a >> a
$ rm a.orig
$ hg qpush --force --no-backup --verbose
applying p2
patching file a
committing files:
a
committing manifest
committing changelog
now at: p2
$ test -f a.orig && echo 'error: backup with --no-backup'
[1]
test qgoto --force --no-backup
$ hg qpop
popping p2
patch queue now empty
$ echo a >> a
$ hg qgoto --force --no-backup p2 --verbose
applying p2
patching file a
committing files:
a
committing manifest
committing changelog
now at: p2
$ test -f a.orig && echo 'error: backup with --no-backup'
[1]
test qpush --keep-changes
$ hg qpush --keep-changes --force
abort: cannot use both --force and --keep-changes
[255]
$ hg qpush --keep-changes --exact
abort: cannot use --exact and --keep-changes together
[255]
$ echo b >> b
$ hg qpush --keep-changes
applying p3
abort: conflicting local changes found
(did you forget to qrefresh?)
[255]
$ rm b
$ hg qpush --keep-changes
applying p3
abort: conflicting local changes found
(did you forget to qrefresh?)
[255]
$ hg rm -A b
$ hg qpush --keep-changes
applying p3
abort: conflicting local changes found
(did you forget to qrefresh?)
[255]
$ hg revert -aq b
$ echo d > d
$ hg add d
$ hg qpush --keep-changes
applying p3
abort: conflicting local changes found
(did you forget to qrefresh?)
[255]
$ hg forget d
$ rm d
$ hg qpop
popping p2
patch queue now empty
$ echo b >> b
$ hg qpush -a --keep-changes
applying p2
applying p3
abort: conflicting local changes found
(did you forget to qrefresh?)
[255]
$ hg qtop
p2
$ hg parents --template "{rev} {desc}\n"
2 imported patch p2
$ hg st b
M b
$ cat b
b
b
test qgoto --keep-changes
$ hg revert -aq b
$ rm e
$ hg qgoto --keep-changes --force p3
abort: cannot use both --force and --keep-changes
[255]
$ echo a >> a
$ hg qgoto --keep-changes p3
applying p3
now at: p3
$ hg st a
M a
$ hg qgoto --keep-changes p2
popping p3
now at: p2
$ hg st a
M a
test mq.keepchanges setting
$ hg --config mq.keepchanges=1 qpush
applying p3
now at: p3
$ hg st a
M a
$ hg --config mq.keepchanges=1 qpop
popping p3
now at: p2
$ hg st a
M a
$ hg --config mq.keepchanges=1 qgoto p3
applying p3
now at: p3
$ hg st a
M a
$ echo b >> b
$ hg --config mq.keepchanges=1 qpop --force --config 'ui.origbackuppath=.hg/origbackups'
popping p3
now at: p2
$ hg st b
$ hg --config mq.keepchanges=1 qpush --exact
abort: local changes found, qrefresh first
[255]
$ hg revert -qa a
$ hg qpop
popping p2
patch queue now empty
$ echo a >> a
$ hg --config mq.keepchanges=1 qpush --force
applying p2
now at: p2
$ hg st a
test previous qpop (with --force and --config) saved .orig files to where user
wants them
$ ls .hg/origbackups
b
$ rm -rf .hg/origbackups
$ cd ..