procutil: make stream detection in make_line_buffered more correct and strict
In make_line_buffered(), we don’t want to wrap the stream if we know that lines
get flushed to the underlying raw stream already.
Previously, the heuristic was too optimistic. It assumed that any stream which
is not an instance of io.BufferedIOBase doesn’t need wrapping. However, there
are buffered streams that aren’t instances of io.BufferedIOBase, like
Mercurial’s own winstdout.
The new logic is different in two ways:
First, only for the check, if unwraps any combination of WriteAllWrapper and
winstdout.
Second, it skips wrapping the stream only if it is an instance of io.RawIOBase
(or already wrapped). If it is an instance of io.BufferedIOBase, it gets
wrapped. In any other case, the function raises an exception. This ensures
that, if an unknown stream is passed or we add another wrapper in the future,
we don’t wrap the stream if it’s already line buffered or not wrap the stream
if it’s not line buffered. In fact, this was already helpful during development
of this change. Without it, I possibly would have forgot that WriteAllWrapper
needs to be ignored for the check, leading to unnecessary wrapping if stdout is
unbuffered.
The alternative would have been to always wrap unknown streams. However, I
don’t think that anyone would benefit from being less strict. We can expect
streams from the standard library to be subclassing either io.RawIOBase or
io.BufferedIOBase, so running Mercurial in the standard way should not regress
by this change. Py2exe might replace sys.stdout and sys.stderr, but that
currently breaks Mercurial anyway and also these streams don’t claim to be
interactive, so this function is not called for them.
#require serve
$ hg init a
$ cd a
$ echo a > a
$ hg ci -Ama -d '1123456789 0'
adding a
$ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
$ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null &
$ while [ ! -f proxy.pid ]; do sleep 0; done
$ cat proxy.pid >> $DAEMON_PIDS
url for proxy, stream
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b
streaming all changes
6 files to transfer, 412 bytes of data (reporevlogstore !)
4 files to transfer, 330 bytes of data (reposimplestore !)
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 1 changesets with 1 changes to 1 files
$ cd ..
url for proxy, pull
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd b-pull
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
checked 1 changesets with 1 changes to 1 files
$ cd ..
host:port for proxy
$ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
proxy url with user name and password
$ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
url with user name and password
$ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
bad host:port for proxy ("Protocol not supported" can happen on
misconfigured hosts)
$ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f
abort: error: (Connection refused|Protocol not supported|.* actively refused it|\$EADDRNOTAVAIL\$|No route to host) (re)
[100]
do not use the proxy if it is in the no list
$ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 83180e7845de
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
proxy can't connect to server
$ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT2/ h
abort: HTTP Error 404: Connection refused
[100]
$ cat proxy.log
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&stream=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] code 404, message Connection refused (glob)
$LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT2/?cmd=capabilities HTTP/1.1" 404 - (glob)