#require serve

This test is a duplicate of 'test-http.t', feel free to factor out

parts that are not bundle1/bundle2 specific.

  $ cat << EOF >> $HGRCPATH

  > [devel]

  > # This test is dedicated to interaction through old bundle

  > legacy.exchange = bundle1

  > EOF

  $ hg init test

  $ cd test

  $ echo foo>foo

  $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg

  $ echo foo>foo.d/foo

  $ echo bar>foo.d/bAr.hg.d/BaR

  $ echo bar>foo.d/baR.d.hg/bAR

  $ hg commit -A -m 1

  adding foo

  adding foo.d/bAr.hg.d/BaR

  adding foo.d/baR.d.hg/bAR

  adding foo.d/foo

  $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log

  $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid

Test server address cannot be reused

  $ hg serve -p $HGPORT1 2>&1

  abort: cannot start server at 'localhost:$HGPORT1': $EADDRINUSE$

  [255]

  $ cd ..

  $ cat hg1.pid hg2.pid >> $DAEMON_PIDS

clone via stream

#if no-reposimplestore

  $ hg clone --stream http://localhost:$HGPORT/ copy 2>&1

  streaming all changes

  7 files to transfer, 606 bytes of data (no-zstd !)

  7 files to transfer, 608 bytes of data (zstd no-rust !)

  9 files to transfer, 734 bytes of data (zstd rust !)

  transferred * bytes in * seconds (*/sec) (glob)

  searching for changes

  no changes found

  updating to branch default

  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg verify -R copy -q

#endif

try to clone via stream, should use pull instead

  $ hg clone --stream http://localhost:$HGPORT1/ copy2

  warning: stream clone requested but server has them disabled

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 1 changesets with 4 changes to 4 files

  new changesets 8b6053c928fe

  updating to branch default

  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

try to clone via stream but missing requirements, so should use pull instead

  $ cat > $TESTTMP/removesupportedformat.py << EOF

  > from mercurial import localrepo

  > def reposetup(ui, repo):

  >     local = repo.local()

  >     if local is not None:

  >         local.supported.remove(b'generaldelta')

  > EOF

  $ hg clone --config extensions.rsf=$TESTTMP/removesupportedformat.py --stream http://localhost:$HGPORT/ copy3

  warning: stream clone requested but client is missing requirements: generaldelta

  (see https://www.mercurial-scm.org/wiki/MissingRequirement for more information)

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 1 changesets with 4 changes to 4 files

  new changesets 8b6053c928fe

  updating to branch default

  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

clone via pull

  $ hg clone http://localhost:$HGPORT1/ copy-pull

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 1 changesets with 4 changes to 4 files

  new changesets 8b6053c928fe

  updating to branch default

  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg verify -R copy-pull -q

  $ cd test

  $ echo bar > bar

  $ hg commit -A -d '1 0' -m 2

  adding bar

  $ cd ..

clone over http with --update

  $ hg clone http://localhost:$HGPORT1/ updated --update 0

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 2 changesets with 5 changes to 5 files

  new changesets 8b6053c928fe:5fed3813f7f5

  updating to branch default

  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg log -r . -R updated

  changeset:   0:8b6053c928fe

  user:        test

  date:        Thu Jan 01 00:00:00 1970 +0000

  summary:     1

  $ rm -rf updated

incoming via HTTP

  $ hg clone http://localhost:$HGPORT1/ --rev 0 partial

  adding changesets

  adding manifests

  adding file changes

  added 1 changesets with 4 changes to 4 files

  new changesets 8b6053c928fe

  updating to branch default

  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd partial

  $ touch LOCAL

  $ hg ci -qAm LOCAL

  $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'

  comparing with http://localhost:$HGPORT1/

  searching for changes

  2

  $ cd ..

pull

  $ cd copy-pull

  $ cat >> .hg/hgrc <<EOF

  > [hooks]

  > changegroup = sh -c "printenv.py --line changegroup"

  > EOF

  $ hg pull

  pulling from http://localhost:$HGPORT1/

  searching for changes

  adding changesets

  adding manifests

  adding file changes

  added 1 changesets with 1 changes to 1 files

  new changesets 5fed3813f7f5

  changegroup hook: HG_HOOKNAME=changegroup

  HG_HOOKTYPE=changegroup

  HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d

  HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d

  HG_SOURCE=pull

  HG_TXNID=TXN:$ID$

  HG_TXNNAME=pull

  http://localhost:$HGPORT1/

  HG_URL=http://localhost:$HGPORT1/

  (run 'hg update' to get a working copy)

  $ cd ..

clone from invalid URL

  $ hg clone http://localhost:$HGPORT/bad

  abort: HTTP Error 404: Not Found

  [100]

test http authentication

+ use the same server to test server side streaming preference

  $ cd test

  $ hg serve --config extensions.x=$TESTDIR/httpserverauth.py -p $HGPORT2 -d \

  >    --pid-file=pid --config server.preferuncompressed=True \

  >    --config web.push_ssl=False --config web.allow_push=* -A ../access.log

  $ cat pid >> $DAEMON_PIDS

  $ cat << EOF > get_pass.py

  > from mercurial import util

  > def newgetpass():

  >   return "pass"

  > util.get_password = newgetpass

  > EOF

  $ hg id http://localhost:$HGPORT2/

  abort: http authorization required for http://localhost:$HGPORT2/

  [255]

  $ hg id http://localhost:$HGPORT2/

  abort: http authorization required for http://localhost:$HGPORT2/

  [255]

  $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/

  http authorization required for http://localhost:$HGPORT2/

  realm: mercurial

  user: user

  password: 5fed3813f7f5

  $ hg id http://user:pass@localhost:$HGPORT2/

  5fed3813f7f5

  $ echo '[auth]' >> .hg/hgrc

  $ echo 'l.schemes=http' >> .hg/hgrc

  $ echo 'l.prefix=lo' >> .hg/hgrc

  $ echo 'l.username=user' >> .hg/hgrc

  $ echo 'l.password=pass' >> .hg/hgrc

  $ hg id http://localhost:$HGPORT2/

  5fed3813f7f5

  $ hg id http://localhost:$HGPORT2/

  5fed3813f7f5

  $ hg id http://user@localhost:$HGPORT2/

  5fed3813f7f5

#if no-reposimplestore

  $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1

  streaming all changes

  8 files to transfer, 916 bytes of data (no-zstd !)

  8 files to transfer, 919 bytes of data (zstd no-rust !)

  10 files to transfer, 1.02 KB of data (zstd rust !)

  transferred * in * seconds (*/sec) (glob)

  searching for changes

  no changes found

  updating to branch default

  5 files updated, 0 files merged, 0 files removed, 0 files unresolved

#endif

--pull should override server's preferuncompressed

  $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 2 changesets with 5 changes to 5 files

  new changesets 8b6053c928fe:5fed3813f7f5

  updating to branch default

  5 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg id http://user2@localhost:$HGPORT2/

  abort: http authorization required for http://localhost:$HGPORT2/

  [255]

  $ hg id http://user:pass2@localhost:$HGPORT2/

  abort: HTTP Error 403: no

  [100]

  $ hg -R dest-pull tag -r tip top

  $ hg -R dest-pull push http://user:pass@localhost:$HGPORT2/

  pushing to http://user:***@localhost:$HGPORT2/

  searching for changes

  remote: adding changesets

  remote: adding manifests

  remote: adding file changes

  remote: added 1 changesets with 1 changes to 1 files

  $ hg rollback -q

  $ sed 's/.*] "/"/' < ../access.log

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 200 -

  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 200 -

  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 200 -

  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 200 -

  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 200 -

  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=capabilities HTTP/1.1" 401 - (no-reposimplestore !)

  "GET /?cmd=capabilities HTTP/1.1" 200 - (no-reposimplestore !)

  "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !)

  "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !)

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !)

  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !)

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !)

  "GET /?cmd=capabilities HTTP/1.1" 401 - (no-reposimplestore !)

  "GET /?cmd=capabilities HTTP/1.1" 200 - (no-reposimplestore !)

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !)

  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 403 -

  "GET /?cmd=capabilities HTTP/1.1" 401 -

  "GET /?cmd=capabilities HTTP/1.1" 200 -

  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524* (glob)

  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull

  $ cd ..

clone of serve with repo in root and unserved subrepo (issue2970)

  $ hg --cwd test init sub

  $ echo empty > test/sub/empty

  $ hg --cwd test/sub add empty

  $ hg --cwd test/sub commit -qm 'add empty'

  $ hg --cwd test/sub tag -r 0 something

  $ echo sub = sub > test/.hgsub

  $ hg --cwd test add .hgsub

  $ hg --cwd test commit -qm 'add subrepo'

  $ hg clone http://localhost:$HGPORT noslash-clone

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 3 changesets with 7 changes to 7 files

  new changesets 8b6053c928fe:56f9bc90cce6

  updating to branch default

  cloning subrepo sub from http://localhost:$HGPORT/sub

  abort: HTTP Error 404: Not Found

  [100]

  $ hg clone http://localhost:$HGPORT/ slash-clone

  requesting all changes

  adding changesets

  adding manifests

  adding file changes

  added 3 changesets with 7 changes to 7 files

  new changesets 8b6053c928fe:56f9bc90cce6

  updating to branch default

  cloning subrepo sub from http://localhost:$HGPORT/sub

  abort: HTTP Error 404: Not Found

  [100]

check error log

  $ cat error.log

Check error reporting while pulling/cloning

  $ $RUNTESTDIR/killdaemons.py