HG(1)

=====

Matt Mackall <mpm@selenic.com>

NAME

----

hg - Mercurial source code management system

SYNOPSIS

--------

'hg' [-v -d -q -y] <command> [command options] [files]

DESCRIPTION

-----------

The hg(1) command provides a command line interface to the Mercurial system.

OPTIONS

-------

--debug, -d::

    enable debugging output

--quiet, -q::

    suppress output

--verbose, -v::

    enable additional output

--noninteractive, -y::

    do not prompt, assume 'yes' for any required answers

COMMAND ELEMENTS

----------------

files ...::

    indicates one or more filename or relative path filenames

path::

    indicates a path on the local machine

revision::

    indicates a changeset which can be specified as a changeset revision

    number, a tag, or a unique substring of the changeset hash value

repository path::

    either the pathname of a local repository or the URI of a remote

    repository.  There are two available URI protocols, http:// which is

    fast and the old-http:// protocol which is much slower but does not

    require a special server on the web host.

COMMANDS

--------

add [files ...]::

    Schedule files to be version controlled and added to the repository.

    The files will be added to the repository at the next commit.

addremove::

    Add all new files and remove all missing files from the repository.

    New files are ignored if they match any of the patterns in .hgignore. As

    with add, these changes take effect at the next commit.

annotate [-r <rev> -u -n -c] [files ...]::

    List changes in files, showing the revision id responsible for each line

    This command is useful to discover who did a change or when a change took

    place.

    options:

    -r, --revision <rev>  annotate the specified revision

    -u, --user            list the author

    -c, --changeset       list the changeset

    -n, --number          list the revision number (default)

cat <file> [revision]::

    Output to stdout the given revision for the specified file.

    If no revision is given then the tip is used.

clone [-U] <source> [dest]::

    Create a copy of an existing repository in a new directory.

    If the destination directory is specified but doesn't exist, it is

    created. If no destination directory is specified, it defaults to the

    current directory.

    The source is added to the new repository's .hg/hgrc file to be used in

    future pulls.

    For efficiency, hardlinks are used for cloning whenever the

    source and destination are on the same filesystem.

    options:

    -U, --noupdate   do not update the new working directory

commit [-A -t -l <file> -t <text> -u <user> -d <datecode>] [files...]::

    Commit changes to the given files into the repository.

    If a list of files is omitted, all changes reported by "hg status"

    will be commited.

    The HGEDITOR or EDITOR environment variables are used to start an

    editor to add a commit comment.

    Options:

    -A, --addremove       run addremove during commit

    -t, --text <text>     use <text> as commit message

    -l, --logfile <file>  show the commit message for the given file

    -d, --date <datecode> record datecode as commit date

    -u, --user <user>     record user as commiter

    aliases: ci

copy <source> <dest>::

    Mark <dest> file as a copy or rename of a <source> one

    This command takes effect for the next commit.

diff [-r revision] [-r revision] [files ...]::

    Show differences between revisions for the specified files.

    Differences between files are shown using the unified diff format.

    When two revision arguments are given, then changes are shown

    between those revisions. If only one revision is specified then

    that revision is compared to the working directory, and, when no

    revisions are specified, the working directory files are compared

    to its parent.

export [revision]::

    Print the changeset header and diffs for a particular revision.

    The information shown in the changeset header is: author, changeset hash,

    parent and commit comment.

forget [files]::

    Undo an 'hg add' scheduled for the next commit.

heads::

    Show all repository head changesets.

    Repository "heads" are changesets that don't have children

    changesets. They are where development generally takes place and

    are the usual targets for update and merge operations.

identify::

    Print a short summary of the current state of the repo.

    This summary identifies the repository state using one or two parent

    hash identifiers, followed by a "+" if there are uncommitted changes

    in the working directory, followed by a list of tags for this revision.

    aliases: id

import [-p <n> -b <base> -q] <patches>::

    Import a list of patches and commit them individually.

    options:

    -p, --strip <n>   directory strip option for patch. This has the same

                      meaning as the correnponding patch option

    -b <path>         base directory to read patches from

    aliases: patch

init::

    Initialize a new repository in the current directory.

manifest [revision]::

    Print a list of version controlled files for the given revision.

    The manifest is the list of files being version controlled. If no revision

    is given then the tip is used.

parents::

    Print the working directory's parent revisions.

pull <repository path>::

    Pull changes from a remote repository to a local one.

    This finds all changes from the repository at the specified path

    or URL and adds them to the local repository. By default, this

    does not update the copy of the project in the working directory.

    options:

    -u, --update   update the working directory to tip after pull

push <destination>::

    Push changes from the local repository to the given destination.

    This is the symmetrical operation for pull. It helps to move

    changes from the current repository to a different one. If the

    destination is local this is identical to a pull in that directory

    from the current one.

    The other currently available push method is SSH. This requires an

    accessible shell account on the destination machine and a copy of

    hg in the remote path. Destinations are specified in the following

    form:

      ssh://[user@]host[:port]/path

rawcommit [-p -d -u -F -t -l]::

    Lowlevel commit, for use in helper scripts.

    This command is not intended to be used by normal users, as it is

    primarily useful for importing from other SCMs.

recover::

    Recover from an interrupted commit or pull.

    This command tries to fix the repository status after an interrupted

    operation. It should only be necessary when Mercurial suggests it.

remove [files ...]::

    Schedule the indicated files for removal from the repository.

    This command shedules the files to be removed at the next commit.

    This only removes files from the current branch, not from the

    entire project history.

    aliases: rm

root::

    Print the root directory of the current repository.

serve [-a addr -n name -p port -t templatedir]::

    Start a local HTTP repository browser and pull server.

    options:

    -a, --address <addr> address to use

    -p, --port <n>       port to use (default: 8000)

    -n, --name <name>    name to show in web pages (default: working dir)

    -t, --templatedir <path> web templates to use

status::

    Show changed files in the working directory.

    The codes used to show the status of files are:

    C = changed

    A = added

    R = removed

    ? = not tracked

tag [-t <text> -d <datecode> -u <user>] <name> [revision]::

    Name a particular revision using <name>.

    Tags are used to name particular revisions of the repository and are

    very useful to compare different revision, to go back to significant

    earlier versions or to mark branch points as releases, etc.

    If no revision is given, the tip is used.

    To facilitate version control, distribution, and merging of tags,

    they are stored as a file named ".hgtags" which is managed

    similarly to other project files and can be hand-edited if

    necessary.

    options:

    -t, --text <text>     message for tag commit log entry

    -d, --date <datecode> datecode for commit

    -u, --user <user>     user for commit

    Note: Mercurial also has support for "local tags" that are not

    version-controlled or distributed which are stored in the .hg/hgrc

    file.

tags::

    List the repository tags.

    This lists both regular and local tags.

tip::

    Show the tip revision.

undo::

    Undo the last commit or pull transaction.

update [-m -C] [revision]::

    Update the working directory to the specified revision.

    By default, update will refuse to run if doing so would require

    merging or discarding local changes.

    With the -m option, a merge will be performed.

    With the -C option, local changes will be lost.

    options:

    -m, --merge       allow merging of branches

    -C, --clean       overwrite locally modified files

    aliases: up checkout co

verify::

    Verify the integrity of the current repository.

    This will perform an extensive check of the repository's

    integrity, validating the hashes and checksums of each entry in

    the changelog, manifest, and tracked files, as well as the

    integrity of their crosslinks and indices.

ENVIRONMENT VARIABLES

---------------------

HGEDITOR::

    This is the name of the editor to use when committing. Defaults to the

    value of EDITOR.

HGMERGE::

    An executable to use for resolving merge conflicts. The program

    will be executed with three arguments: local file, remote file,

    ancestor file.

    The default program is "hgmerge", which is a shell script provided

    by Mercurial with some sensible defaults.

HGUSER::

    This is the string used for the author of a commit.

EMAIL::

    If HGUSER is not set, this will be used as the author for a commit.

LOGNAME::

    If neither HGUSER nor EMAIL is set, LOGNAME will be used (with

    '@hostname' appended) as the author value for a commit.

EDITOR::

    This is the name of the editor used in the hgmerge script. It will be

    used for commit messages if HGEDITOR isn't set. Defaults to 'vi'.

PYTHONPATH::

    This is used by Python to find imported modules and may need to be set

    appropriately if Mercurial is not installed system-wide.

FILES

-----

 .hgignore::

    This file contains regular expressions (one per line) that describe file

    names that should be ignored by hg.

 .hgtags::

    This file contains changeset hash values and text tag names (one of each

    seperated by spaces) that correspond to tagged versions of the repository

    contents.

 $HOME/.hgrc, .hg/hgrc::

    This file contains defaults and configuration. Values in .hg/hgrc

    override those in .hgrc.

NAMED REPOSITORIES

------------------

To give symbolic names to a repository, create a section in .hgrc

or .hg/hgrc containing assignments of names to paths. Example:

-----------------

[paths]

hg = http://selenic.com/hg

tah = http://hg.intevation.org/mercurial-tah/

-----------------

LOCAL TAGS

----------

To create tags that are local to the repository and not distributed or

version-controlled, create an hgrc section like the following:

----------------

[tags]

working = 2dcced388cab3677a8f543c3c47a0ad34ac9d435

tested = 12e0fdbc57a0be78f0e817fd1d170a3615cd35da

----------------

HOOKS

-----

Mercurial supports a set of 'hook', commands that get automatically

executed by various actions such as starting or finishing a commit. To

specify a hook, simply create an hgrc section like the following:

-----------------

[hooks]

precommit = echo "this hook gets executed immediately before a commit"

commit = hg export $NODE | mail -s "new commit $NODE" commit-list

-----------------

NON_TRANSPARENT PROXY SUPPORT

-----------------------------

To access a Mercurial repository through a proxy, create a file

$HOME/.hgrc in the following format:

--------------

[http_proxy]

host=myproxy:8080

user=<username>

passwd=<password>

no=<localhost1>,<localhost2>,<localhost3>,...

--------------

"user" and "passwd" fields are used for authenticating proxies, "no" is a

comma-separated list of local host names to not proxy.

BUGS

----

Probably lots, please post them to the mailing list (See Resources below)

when you find them.

AUTHOR

------

Written by Matt Mackall <mpm@selenic.com>

RESOURCES

---------

http://selenic.com/mercurial[Main Web Site]

http://selenic.com/hg[Source code repository]

http://selenic.com/mailman/listinfo/mercurial[Mailing list]

COPYING

-------

Copyright (C) 2005 Matt Mackall.

Free use of this software is granted under the terms of the GNU General

Public License (GPL).